2.31.0:
2011-10-25 Murray Cumming <murrayc@murrayc.com>
Regenerated more defs.
* gio/src/gio_enums.defs: Regenerated with enums.pl.
* gio/src/gio_methods.defs: Regenerated with h2defs.py.
* glib/src/glib_functions.defs:
* glib/src/gobject_functions.defs: Regenereated with h2defs.py
* glib/src/glib_deprecated_functions.defs: Added this file.
* glib/src/glib.defs: Mention the new file.
2011-10-25 Murray Cumming <murrayc@murrayc.com>
Do not use gthread-2.0.
* configure.ac: Do not use gthread-2.0 at all, because it only contains
empty functions so it is better to just not call them.
Require the latest glib version, to avoid people using this version of
glibmm with a version of glib that would need g_thread_init().
* glib/src/thread.ccg: thread_init(): Do not call g_thread_init() because
it now does nothing and would require linking to gthread-2.0.
2011-10-25 Murray Cumming <murrayc@murrayc.com>
Fix the make check build by always linking to gthread-2.0.
* configure.ac: Always use gthread-2.0 because there is now no advantage to
not doing that, because threading is now always enabled in glib.
Remove the separate GTHREAD* variables.
* glib/glibmm/Makefile.am:
* gio/giomm/Makefile.am:
* tests/Makefile.am:
* tools/Makefile.am:
* examples/Makefile.am: Remove use of the GTHREAD* variables..
* examples/network/resolver.cc: Remove the non-threading option and code that
uses it.
2011-10-25 Murray Cumming <murrayc@murrayc.com>
Regenerate enums defs.
* glib/src/glib_enums.defs, gobject_enums.defs: Regenerated with enums.pl.
* glib/src/glib_deprecated_enums.defs: Added this file.
* glib/src/filelist.am: Mention the new file.
* glib/src/glib.defs: Mention the new file and actually mention
gobject_enums.defs.
2011-10-23 José Alburquerque <jaalburqu@svn.gnome.org>
Gio::DBus::Connection: Temporarily remove newly added call() methods.
* gio/src/dbusconnection.{ccg,hg}: Remove the newly added call()
methods with a UnixFDList parameter until the call_finish() method
with a UnixFDList parameter is added also.
* gio/src/credentials.hg:
* gio/src/dbusmessage.ccg:
* gio/src/dbusmessage.hg: Typos.
2011-10-21 Murray Cumming <murrayc@murrayc.com>
Thread: Use g_thread_new() instead of g_thread_create().
* glib/src/thread.[hg|ccg]: create(): Replace use of (deprecated)
g_thread_create() with g_thread_new(), ignoring the joinable parameter.
create(lots of parameters): Deprecate this, because the parameters are
ignored by g_thread_create_full() now.
2011-10-21 Murray Cumming <murrayc@murrayc.com>
Deprecated thread_init(), Thread::joinable(), *_priotity(), etc.
* glib/src/thread.[hg|ccg]: Deprecate thread_init(), thread_supported,
Thread::joinable(), Thread::set_priority(), Thread::get_priority() and
ThreadPriority.
2011-10-16 José Alburquerque <jaalburqu@svn.gnome.org>
gmmproc: Remove M4 warnings due to commas in return types.
* tools/m4/convert_base.m4 (__HASH2): Appropriately quote the
pushdef() arguments and the m4_ifelse() arguments due to some warnings
generated because of the newly wrapped method in the
ApplicationCommandLine class (get_platform_data()) which has a comma
in the return type. The wrapping was successful even with the warning
but the return type was still being split when passed to this macro.
Document what the macro does.
(_CONVERT): Typos.
(_CONVERSION):
(_INITIALIZATION): Document what parameters are allowed for these
macros.
2011-10-13 José Alburquerque <jaalburqu@svn.gnome.org>
Gio::DBus::Connection: Correct UnixFDList class forward declaration.
* gio/src/dbusconnection.hg: Place the class declaration in the Gio
namespace and not in the Gio::DBus namespace which is incorrect to fix
the build. There was a '-Werror' option in the CXXFLAGS variable of
my ~/.jhbuildrc file which was causing deprecation warnings to break
the build so I did not verify the previous to last commit, sorry.
2011-10-13 José Alburquerque <jaalburqu@svn.gnome.org>
Date: set_time(): Use g_date_set_time_t() instead of g_date_set_time().
* glib/src/date.ccg: The latter function is deprecated. This fixes
the build with the master branch of glib with deprecations disabled
though there's one small error related to the Threads discussion on
the mailing list that will still have to be looked at.
2011-10-13 José Alburquerque <jaalburqu@svn.gnome.org>
DBusMethodInvocation: Add UnixFDList return_value() method overload.
* gio/src/dbusmethodinvocation.hg: Add the method overload.
* gio/src/dbusmessage.hg: Add an _IGNORE.
2011-10-13 Murray Cumming <murrayc@murrayc.com>
Do not include glib/gvarianttype.h.
* glib/src/thread.hg: Include glib.h instead. The recent glib version
has a pragma that complains about this.
2011-10-12 José Alburquerque <jaalburqu@svn.gnome.org>
Gio::DBus::Connection: Add UnixFDList call() method overloads.
* gio/src/dbusconnection.{ccg,hg}: Add cancellable and
non-cancellable UnixFDList call() methods. The TODO's are for when
gmmproc can possibly handle setting C++ parameters from C output
parameters properly which may be possible with a few changes.
2011-10-12 José Alburquerque <jaalburqu@svn.gnome.org>
VariantContainerBase: Add create_maybe().
* glib/src/variant.{ccg,hg}: Add a create_maybe() method because it
was discussed on the mailing list. Clearly the variant classes are
not intended for general use. However, this method is added just
so that the API is more complete.
2011-10-11 José Alburquerque <jaalburqu@svn.gnome.org>
DataInputStream: Add read_line_utf8() and read_line_finish_utf8().
* gio/src/datainputstream.hg: Add the two methods and their overloads
using the new gmmproc parameter reordering, optional parameter
signaling and output parameter signaling functionality. It's not
difficult to write the _INITIALIZATION and _WRAP_METHOD macros but
they may not be readily understandable. I think they are, but I could
be wrong.
2011-10-11 José Alburquerque <jaalburqu@svn.gnome.org>
gmmproc: _WRAP_METHOD: Use {OUT} instead of {RET} for output params.
* tools/pm/Output.pm: Use {OUT} instead of {RET} to signify that a
parameter is an output parameter because it is probably more
intuitive.
* tools/m4/convert_base.m4 (_INITIALIZE): Don't quote the C return
because otherwise the macros in it aren't expanded when the macro is
used. This could be because of the recent M4 changes in the previous
to the last commit.
2011-10-11 José Alburquerque <jaalburqu@svn.gnome.org>
ApplicationCommandLine: Add the get_platform_data() method.
* gio/src/applicationcommandline.hg:
2011-10-10 José Alburquerque <jaalburqu@svn.gnome.org>
gmmproc: _WRAP_METHOD: Allow return types to have commas.
* tools/pm/WrapParser.pm (string_split_commas): Modify so that when
splitting by commas, '<' and '>' are taken into account by levels as
is done with '(' and ')'. This so that if a return type in a
_WRAP_METHOD has a comma (which is possible, e.g. with std::map<>) the
return type is not split incorrectly.
(read_file): Modified so that '<' and '>' are tokens by which to
split.
* tools/pm/Output.pm (output_wrap_meth): Add `' around the return type
when calling the _METHOD() and _STATIC_METHOD() M4 macros so that
commas don't split the return type into more than one argument.
* tools/m4/method.m4: Do the same (for the return type) in _METHOD()
and _STATIC_METHOD() when calling the _CONVERT() macro for the same
reason as above.
Bug #661401
2011-10-10 José Alburquerque <jaalburqu@svn.gnome.org>
SimpleAction: Wrap the signals and properties.
* gio/src/simpleaction.hg: Wrap the signals using the
no_default_handler option because there are no signal members exposed
in the GSimpleActionClass struct (in fact, there is no
GSimpleActionClass struct). Also wrap the properties.
2011-10-10 José Alburquerque <jaalburqu@svn.gnome.org>
Application, {,Simple}Action{,Group}: Update @newins{}'s.
* gio/src/action.hg:
* gio/src/application.hg:
* gio/src/simpleaction.hg:
* gio/src/simpleactiongroup.hg:
* gio/src/applicationcommandline.hg: Add bug URL to a TODO.
2011-10-10 José Alburquerque <jaalburqu@svn.gnome.org>
ApplicationCommandLine: Update a TODO.
* gio/src/applicationcommandline.hg:
2011-10-09 José Alburquerque <jaalburqu@svn.gnome.org>
Re-add Application and related class so they can be finished.
* gio/giomm.h:
* gio/src/action.ccg:
* gio/src/action.hg:
* gio/src/actiongroup.ccg:
* gio/src/actiongroup.hg:
* gio/src/application.ccg:
* gio/src/application.hg:
* gio/src/applicationcommandline.ccg:
* gio/src/applicationcommandline.hg:
* gio/src/filelist.am:
* gio/src/simpleaction.ccg:
* gio/src/simpleaction.hg:
* gio/src/simpleactiongroup.ccg:
* gio/src/simpleactiongroup.hg:
2011-09-27 Krzesimir Nowak <qdlacz@gmail.com>
Fix h2def.py not parsing function starting with G_GNUC_* macros.
* tools/defs_gen/h2def.py: Strip some G_GNUC_* macros that are known
to be placed before return type of function prototype.
Fixes bug #660225.