=== release 1.0.1 ===
2012-10-07 Tim-Philipp Müller <tim@centricular.net>
* configure.ac:
releasing 1.0.1
2012-10-06 14:57:10 +0100 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 6c0b52c to 6bb6951
2012-10-05 15:12:27 -0700 Michael Smith <msmith@rdio.com>
* gst/interleave/deinterleave.c:
deinterleave: output channels should be marked as MONO, not FRONT_LEFT, if we're not preserving input channel positions.
2012-10-04 15:13:20 -0700 Michael Smith <msmith@rdio.com>
* gst/interleave/interleave.c:
interleave: use gst_audio_channel_positions_to_mask instead of a local copy of half of it. Handles some values more correctly.
2012-10-04 20:32:45 +0200 Rasmus Rohde <rohde@duff.dk>
* gst/rtp/gstrtpgstdepay.c:
gstrtpdepay: don't leak input buffer
The rtp buffer is never unmapped in the normal code exit path
of gst_rtp_gst_depay_process(..) resulting in a memory leak.
https://bugzilla.gnome.org/show_bug.cgi?id=685512
2012-10-04 18:37:18 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* gst/videofilter/gstvideobalance.c:
videobalance: Add support for NV12 and NV21
2012-10-01 15:11:05 +0200 Patricia Muscalu <patricia@axis.com>
* gst/rtp/gstrtph264pay.c:
* tests/check/elements/rtp-payloading.c:
rtph264pay: do not push unmapped data
Also do not use a GstBuffer after it has been pushed into the adapter.
https://bugzilla.gnome.org/show_bug.cgi?id=685213
2012-10-03 10:51:45 -0700 Michael Smith <msmith@rdio.com>
* gst/interleave/deinterleave.c:
* sys/v4l2/gstv4l2bufferpool.c:
* sys/ximage/ximageutil.c:
meta info: threadsafe registration using g_once
2012-10-01 15:44:01 +0200 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* gst/avi/gstavidemux.c:
avidemux: push mode; handle some initial junk before hdrl list
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=685059
2012-10-01 14:03:19 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* tests/icles/gdkpixbufsink-test.c:
tests: port gdkpixbufsink test
2012-09-29 11:59:31 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst/level/gstlevel.c:
* tests/check/elements/videocrop.c:
Purge references to liboil
https://bugzilla.gnome.org/show_bug.cgi?id=673285
2012-09-28 16:51:01 +0200 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* gst/avi/avi-ids.h:
* gst/avi/gstavidemux.c:
avidemux: recognize all xsub frames as keyframes
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=684977
2012-09-28 16:50:25 +0200 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* gst/avi/gstavidemux.c:
avidemux: push mode: find the correct chunk for segment following seek
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=684977
2012-09-27 22:17:49 +0100 Arnaud Vrac <rawoul@gmail.com>
* gst/isomp4/qtdemux.h:
qtdemux: fix parsing in push mode when moov atom is at the end
When playing an mp4 file with the MOOV atom at the end of the file, playback
fails with the error message "no 'moov' atom within the first 10 MB". This is
due to a mistake in the upstream_size typing, making the seek to the end of
file never happening.
https://bugzilla.gnome.org/show_bug.cgi?id=684972
2012-09-27 15:50:49 -0300 Andre Moreira Magalhaes (andrunko) <andre.magalhaes@collabora.co.uk>
* gst/videofilter/gstgamma.c:
gamma: remove duplicate entries at format at caps
Avoids extra caps/structures processing
2012-09-27 14:13:42 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* gst/rtp/gstrtpvrawdepay.c:
rtpvrawdepay: negotiate pool with srcpad caps
2012-09-27 11:02:51 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/dv/gstdvdemux.c:
dvdemux: The convert and duration queries are not supposed to change the format
2012-09-26 09:28:59 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst/videomixer/videomixer2.c:
videomixer: clear video frame more correctly
Make sure not to touch memory that doesn't belong to
our frame, we might be one part of a side-by-side 3D
frame, or in a picture-in-picture scenario.
2012-09-26 00:44:59 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst/flv/gstflvdemux.c:
flvdemux: minor clean-up
Use GstByteWriter, because we can, and g_value_take_boxed.
2012-09-10 10:27:28 +0400 Dmitriy Samonenko <dmitriy.samonenko@teligent.ru>
* gst/flv/gstflvdemux.c:
flvdemux: fix speex audio decoding by creating fake stream header
https://bugzilla.gnome.org/show_bug.cgi?id=683622
2012-09-25 21:21:15 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst/videomixer/videomixer2.c:
* tests/check/pipelines/simple-launch-lines.c:
videomixer: fix warnings when using transparent background
gst_video_frame_map() increases the refcount, which makes
the buffer not writable any more technically, so calling
gst_buffer_memset() on it will cause nasty warnings.
Unit test disabled because it very rarely (for me)
fails, possibly negotiation-related.
https://bugzilla.gnome.org/show_bug.cgi?id=684398
2012-09-25 10:43:28 +0200 Robert Swain <robert.swain@collabora.co.uk>
* gst/deinterlace/gstdeinterlace.c:
deinterlace: Add some useful debug logging
2012-09-25 10:41:44 +0200 Robert Swain <robert.swain@collabora.co.uk>
* gst/deinterlace/gstdeinterlace.c:
deinterlace: Fix telecine
This only affects behaviour in telecine cases with pattern locking
enabled. The default case should be untouched.
This works with the output from fieldanalysis at least, but the field
order looks swapped for telecine mixed buffers with the
David_slides_Schleef clip.
2012-09-25 14:43:15 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* ext/vpx/gstvp8enc.c:
vp8enc: Disable GLIB deprecation warnings
GValueArray has been deprecated since 2.32 ... but there's no usable
replacement for it.
See https://bugzilla.gnome.org/show_bug.cgi?id=667228
2012-09-25 14:18:35 +0200 Edward Hervey <edward@collabora.com>
* gst/videomixer/videomixer2.c:
videomixer: Fix leak
2012-09-24 16:46:18 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* configure.ac:
* docs/plugins/inspect/plugin-1394.xml:
* docs/plugins/inspect/plugin-aasink.xml:
* docs/plugins/inspect/plugin-alaw.xml:
* docs/plugins/inspect/plugin-alpha.xml:
* docs/plugins/inspect/plugin-alphacolor.xml:
* docs/plugins/inspect/plugin-apetag.xml:
* docs/plugins/inspect/plugin-audiofx.xml:
* docs/plugins/inspect/plugin-audioparsers.xml:
* docs/plugins/inspect/plugin-auparse.xml:
* docs/plugins/inspect/plugin-autodetect.xml:
* docs/plugins/inspect/plugin-avi.xml:
* docs/plugins/inspect/plugin-cacasink.xml:
* docs/plugins/inspect/plugin-cutter.xml:
* docs/plugins/inspect/plugin-debug.xml:
* docs/plugins/inspect/plugin-deinterlace.xml:
* docs/plugins/inspect/plugin-dv.xml:
* docs/plugins/inspect/plugin-effectv.xml:
* docs/plugins/inspect/plugin-equalizer.xml:
* docs/plugins/inspect/plugin-flac.xml:
* docs/plugins/inspect/plugin-flv.xml:
* docs/plugins/inspect/plugin-flxdec.xml:
* docs/plugins/inspect/plugin-gdkpixbuf.xml:
* docs/plugins/inspect/plugin-goom.xml:
* docs/plugins/inspect/plugin-goom2k1.xml:
* docs/plugins/inspect/plugin-icydemux.xml:
* docs/plugins/inspect/plugin-id3demux.xml:
* docs/plugins/inspect/plugin-imagefreeze.xml:
* docs/plugins/inspect/plugin-interleave.xml:
* docs/plugins/inspect/plugin-isomp4.xml:
* docs/plugins/inspect/plugin-jack.xml:
* docs/plugins/inspect/plugin-jpeg.xml:
* docs/plugins/inspect/plugin-level.xml:
* docs/plugins/inspect/plugin-matroska.xml:
* docs/plugins/inspect/plugin-mulaw.xml:
* docs/plugins/inspect/plugin-multifile.xml:
* docs/plugins/inspect/plugin-multipart.xml:
* docs/plugins/inspect/plugin-navigationtest.xml:
* docs/plugins/inspect/plugin-oss4.xml:
* docs/plugins/inspect/plugin-ossaudio.xml:
* docs/plugins/inspect/plugin-png.xml:
* docs/plugins/inspect/plugin-pulseaudio.xml:
* docs/plugins/inspect/plugin-replaygain.xml:
* docs/plugins/inspect/plugin-rtp.xml:
* docs/plugins/inspect/plugin-rtpmanager.xml:
* docs/plugins/inspect/plugin-rtsp.xml:
* docs/plugins/inspect/plugin-shapewipe.xml:
* docs/plugins/inspect/plugin-shout2send.xml:
* docs/plugins/inspect/plugin-smpte.xml:
* docs/plugins/inspect/plugin-soup.xml:
* docs/plugins/inspect/plugin-spectrum.xml:
* docs/plugins/inspect/plugin-speex.xml:
* docs/plugins/inspect/plugin-taglib.xml:
* docs/plugins/inspect/plugin-udp.xml:
* docs/plugins/inspect/plugin-video4linux2.xml:
* docs/plugins/inspect/plugin-videobox.xml:
* docs/plugins/inspect/plugin-videocrop.xml:
* docs/plugins/inspect/plugin-videofilter.xml:
* docs/plugins/inspect/plugin-videomixer.xml:
* docs/plugins/inspect/plugin-vpx.xml:
* docs/plugins/inspect/plugin-wavenc.xml:
* docs/plugins/inspect/plugin-wavpack.xml:
* docs/plugins/inspect/plugin-wavparse.xml:
* docs/plugins/inspect/plugin-ximagesrc.xml:
* docs/plugins/inspect/plugin-y4menc.xml:
* win32/common/config.h:
Back to development (bug fixing)
=== release 1.0.0 ===
2012-09-24 14:06:42 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* NEWS:
* RELEASE:
* configure.ac:
* docs/plugins/inspect/plugin-1394.xml:
* docs/plugins/inspect/plugin-aasink.xml:
* docs/plugins/inspect/plugin-alaw.xml:
* docs/plugins/inspect/plugin-alpha.xml:
* docs/plugins/inspect/plugin-alphacolor.xml:
* docs/plugins/inspect/plugin-apetag.xml:
* docs/plugins/inspect/plugin-audiofx.xml:
* docs/plugins/inspect/plugin-audioparsers.xml:
* docs/plugins/inspect/plugin-auparse.xml:
* docs/plugins/inspect/plugin-autodetect.xml:
* docs/plugins/inspect/plugin-avi.xml:
* docs/plugins/inspect/plugin-cacasink.xml:
* docs/plugins/inspect/plugin-cutter.xml:
* docs/plugins/inspect/plugin-debug.xml:
* docs/plugins/inspect/plugin-deinterlace.xml:
* docs/plugins/inspect/plugin-dv.xml:
* docs/plugins/inspect/plugin-effectv.xml:
* docs/plugins/inspect/plugin-equalizer.xml:
* docs/plugins/inspect/plugin-flac.xml:
* docs/plugins/inspect/plugin-flv.xml:
* docs/plugins/inspect/plugin-flxdec.xml:
* docs/plugins/inspect/plugin-gdkpixbuf.xml:
* docs/plugins/inspect/plugin-goom.xml:
* docs/plugins/inspect/plugin-goom2k1.xml:
* docs/plugins/inspect/plugin-icydemux.xml:
* docs/plugins/inspect/plugin-id3demux.xml:
* docs/plugins/inspect/plugin-imagefreeze.xml:
* docs/plugins/inspect/plugin-interleave.xml:
* docs/plugins/inspect/plugin-isomp4.xml:
* docs/plugins/inspect/plugin-jack.xml:
* docs/plugins/inspect/plugin-jpeg.xml:
* docs/plugins/inspect/plugin-level.xml:
* docs/plugins/inspect/plugin-matroska.xml:
* docs/plugins/inspect/plugin-mulaw.xml:
* docs/plugins/inspect/plugin-multifile.xml:
* docs/plugins/inspect/plugin-multipart.xml:
* docs/plugins/inspect/plugin-navigationtest.xml:
* docs/plugins/inspect/plugin-oss4.xml:
* docs/plugins/inspect/plugin-ossaudio.xml:
* docs/plugins/inspect/plugin-png.xml:
* docs/plugins/inspect/plugin-pulseaudio.xml:
* docs/plugins/inspect/plugin-replaygain.xml:
* docs/plugins/inspect/plugin-rtp.xml:
* docs/plugins/inspect/plugin-rtpmanager.xml:
* docs/plugins/inspect/plugin-rtsp.xml:
* docs/plugins/inspect/plugin-shapewipe.xml:
* docs/plugins/inspect/plugin-shout2send.xml:
* docs/plugins/inspect/plugin-smpte.xml:
* docs/plugins/inspect/plugin-soup.xml:
* docs/plugins/inspect/plugin-spectrum.xml:
* docs/plugins/inspect/plugin-speex.xml:
* docs/plugins/inspect/plugin-taglib.xml:
* docs/plugins/inspect/plugin-udp.xml:
* docs/plugins/inspect/plugin-video4linux2.xml:
* docs/plugins/inspect/plugin-videobox.xml:
* docs/plugins/inspect/plugin-videocrop.xml:
* docs/plugins/inspect/plugin-videofilter.xml:
* docs/plugins/inspect/plugin-videomixer.xml:
* docs/plugins/inspect/plugin-vpx.xml:
* docs/plugins/inspect/plugin-wavenc.xml:
* docs/plugins/inspect/plugin-wavpack.xml:
* docs/plugins/inspect/plugin-wavparse.xml:
* docs/plugins/inspect/plugin-ximagesrc.xml:
* docs/plugins/inspect/plugin-y4menc.xml:
* gst-plugins-good.doap:
* win32/common/config.h:
Release 1.0.0
2012-09-24 11:56:56 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* tests/check/elements/rganalysis.c:
tests: remove g_printerr() that's not needed any longer
now that tcase_skip_broken_test() prints it as well.
2012-09-23 19:50:42 +0100 Tim-Philipp Müller <tim@centricular.net>
* tests/check/elements/rganalysis.c:
tests: disable failing replaygain tests
2012-09-23 16:31:37 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst/smpte/gstsmpte.c:
* gst/smpte/gstsmpte.h:
smpte: send stream-start event
2012-09-23 16:10:36 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst/multipart/multipartmux.c:
* gst/multipart/multipartmux.h:
multipartmux: send stream-start event
2012-09-23 16:02:19 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst/matroska/matroska-mux.c:
matroskamux: send stream-start
2012-09-23 15:57:35 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst/isomp4/gstqtmux.c:
qtmux: send stream-start event
2012-09-23 15:48:54 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst/interleave/interleave.c:
* gst/interleave/interleave.h:
interleave: add a bunch of FIXMEs
Needs some more work, so stream-start, caps and tags are
sent in the right order.
2012-09-23 15:18:54 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst/flv/gstflvmux.c:
flvmux: send stream-start event
2012-09-23 15:16:14 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst/avi/gstavimux.c:
avimux: send stream-start event
2012-09-22 16:08:05 +0100 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 4f962f7 to 6c0b52c
2012-09-21 21:54:36 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* gst/rtsp/gstrtspsrc.c:
rtspsrc: answer URI query
Without this, something also answered the query
with TRUE but without setting a uri, not sure
what that was..
2012-09-20 17:28:47 -0400 Olivier Crête <olivier.crete@collabora.com>
* gst/rtp/gstrtph264pay.c:
rtph264pay: Make sure the caps don't have duplicated sps/pps
2012-09-20 19:58:12 +0200 Arun Raghavan <arun.raghavan@collabora.co.uk>
* ext/pulse/pulsesrc.c:
pulsesrc: Mute stream post-connection if required
A bug in PulseAudio causes PA_STREAM_START_MUTED to be rejected on
record streams. Until this is fixed upstream, we mute the stream
manually at startup. Based on a patch by Alban Browaeys
<prahal@yahoo.com>.
https://bugzilla.gnome.org/show_bug.cgi?id=684469
2012-09-20 18:00:59 -0700 Michael Smith <msmith@rdio.com>
* gst/isomp4/qtdemux.c:
qtdemux: 24 bit audio here is S24LE, not S24_3LE.
2012-09-20 10:07:24 +0200 Sjoerd Simons <sjoerd@luon.net>
* sys/v4l2/gstv4l2src.c:
v4l2src: handle latency query before setting up the bufferpool
Fixes crash if no bufferpool is set up yet.
https://bugzilla.gnome.org/show_bug.cgi?id=684430
2012-09-19 09:17:03 +0530 Arun Raghavan <arun.raghavan@collabora.co.uk>
* sys/osxaudio/gstosxaudiosink.c:
osxaudiosink: Specify endianness in IEC 61937 payloading
Corresponds to an API change in gst-plugins-base. This needs to be fixed
to query the expected byte order using appropriate API.
https://bugzilla.gnome.org/show_bug.cgi?id=678021
2012-09-19 09:15:53 +0530 Arun Raghavan <arun.raghavan@collabora.co.uk>
* sys/directsound/gstdirectsoundsink.c:
directsoundsink: Specify endianness in IEC 61937 payloading
DirectSound expects native endian byte order.
https://bugzilla.gnome.org/show_bug.cgi?id=678021
2012-09-19 09:13:11 +0530 Arun Raghavan <arun.raghavan@collabora.co.uk>
* ext/pulse/pulsesink.c:
pulsesink: Specify endianness in IEC 61937 payloading
Corresponds to an API change in gst-plugins-base.
https://bugzilla.gnome.org/show_bug.cgi?id=678021
2012-09-19 00:39:01 +0200 Robert Swain <robert.swain@collabora.co.uk>
* gst/deinterlace/gstdeinterlace.c:
deinterlace: Remove incorrect logic
I don't understand why these lines were added, they don't make sense to
me now and both David and I agree that removing them moves closer to
related logic being correct, therefore, they're being removed.
I've tested a few progressive, interlaced and telecine clips and they
all behave properly timestamp-wise and visually after these changes.
2012-09-19 00:17:49 +0200 Robert Swain <robert.swain@collabora.co.uk>
* gst/deinterlace/gstdeinterlace.c:
deinterlace: Fix field duration
The frame rate fraction is correctly adjusted in the cases preceding the
field duration calculation and so the factor of 2 is incorrect.
2012-09-18 10:34:03 -0700 Michael Smith <msmith@rdio.com>
* gst/videobox/gstvideobox.c:
videobox: Fix U/V strides for a number of cases.
2012-09-18 12:13:21 +0200 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* gst/videomixer/videomixer2.c:
videomixer: init videoinfo
... to prevent random bogus caps fields.
2012-09-18 12:12:39 +0200 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* gst/videomixer/videomixer2.c:
videomixer: chain up to collectpads query function
2012-09-17 13:17:00 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.co.uk>
* gst/videomixer/videomixer2.c:
videomixer: Don't let GstCollectPad shadow custom sink pad query func
In the current implementation, the custom pad query function is not called.
This patch, set that query function on the GstCollectPads to avoid this
shadowing.
See https://bugzilla.gnome.org/show_bug.cgi?id=684237
2012-09-17 18:23:11 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* tests/files/Makefile.am:
tests: dist image.jpg for jpeg test
=== release 0.11.99 ===
2012-09-17 17:57:58 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* configure.ac:
* gst-plugins-good.doap:
* win32/common/config.h:
Release 0.11.99
2012-09-17 16:53:04 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* docs/plugins/gst-plugins-good-plugins.hierarchy:
* docs/plugins/gst-plugins-good-plugins.types:
* docs/plugins/inspect/plugin-1394.xml:
* docs/plugins/inspect/plugin-aasink.xml:
* docs/plugins/inspect/plugin-alaw.xml:
* docs/plugins/inspect/plugin-alpha.xml:
* docs/plugins/inspect/plugin-alphacolor.xml:
* docs/plugins/inspect/plugin-apetag.xml:
* docs/plugins/inspect/plugin-audiofx.xml:
* docs/plugins/inspect/plugin-audioparsers.xml:
* docs/plugins/inspect/plugin-auparse.xml:
* docs/plugins/inspect/plugin-autodetect.xml:
* docs/plugins/inspect/plugin-avi.xml:
* docs/plugins/inspect/plugin-cacasink.xml:
* docs/plugins/inspect/plugin-cutter.xml:
* docs/plugins/inspect/plugin-debug.xml:
* docs/plugins/inspect/plugin-deinterlace.xml:
* docs/plugins/inspect/plugin-dv.xml:
* docs/plugins/inspect/plugin-effectv.xml:
* docs/plugins/inspect/plugin-equalizer.xml:
* docs/plugins/inspect/plugin-flac.xml:
* docs/plugins/inspect/plugin-flv.xml:
* docs/plugins/inspect/plugin-flxdec.xml:
* docs/plugins/inspect/plugin-gdkpixbuf.xml:
* docs/plugins/inspect/plugin-goom.xml:
* docs/plugins/inspect/plugin-goom2k1.xml:
* docs/plugins/inspect/plugin-icydemux.xml:
* docs/plugins/inspect/plugin-id3demux.xml:
* docs/plugins/inspect/plugin-imagefreeze.xml:
* docs/plugins/inspect/plugin-interleave.xml:
* docs/plugins/inspect/plugin-isomp4.xml:
* docs/plugins/inspect/plugin-jack.xml:
* docs/plugins/inspect/plugin-jpeg.xml:
* docs/plugins/inspect/plugin-level.xml:
* docs/plugins/inspect/plugin-matroska.xml:
* docs/plugins/inspect/plugin-mulaw.xml:
* docs/plugins/inspect/plugin-multifile.xml:
* docs/plugins/inspect/plugin-multipart.xml:
* docs/plugins/inspect/plugin-navigationtest.xml:
* docs/plugins/inspect/plugin-oss4.xml:
* docs/plugins/inspect/plugin-ossaudio.xml:
* docs/plugins/inspect/plugin-png.xml:
* docs/plugins/inspect/plugin-pulseaudio.xml:
* docs/plugins/inspect/plugin-replaygain.xml:
* docs/plugins/inspect/plugin-rtp.xml:
* docs/plugins/inspect/plugin-rtpmanager.xml:
* docs/plugins/inspect/plugin-rtsp.xml:
* docs/plugins/inspect/plugin-shapewipe.xml:
* docs/plugins/inspect/plugin-shout2send.xml:
* docs/plugins/inspect/plugin-smpte.xml:
* docs/plugins/inspect/plugin-soup.xml:
* docs/plugins/inspect/plugin-spectrum.xml:
* docs/plugins/inspect/plugin-speex.xml:
* docs/plugins/inspect/plugin-taglib.xml:
* docs/plugins/inspect/plugin-udp.xml:
* docs/plugins/inspect/plugin-video4linux2.xml:
* docs/plugins/inspect/plugin-videobox.xml:
* docs/plugins/inspect/plugin-videocrop.xml:
* docs/plugins/inspect/plugin-videofilter.xml:
* docs/plugins/inspect/plugin-videomixer.xml:
* docs/plugins/inspect/plugin-vpx.xml:
* docs/plugins/inspect/plugin-wavenc.xml:
* docs/plugins/inspect/plugin-wavpack.xml:
* docs/plugins/inspect/plugin-wavparse.xml:
* docs/plugins/inspect/plugin-ximagesrc.xml:
* docs/plugins/inspect/plugin-y4menc.xml:
docs: update
2012-09-17 13:30:15 +0200 Christian Fredrik Kalager Schaller <uraeus@linuxrisin.org>
* gst-plugins-good.spec.in:
Fix spec file for vp8 move
2012-09-17 13:23:36 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* Makefile.am:
annodex: Add to the CRUFT_DIRS
2012-09-17 12:14:07 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/gst-plugins-good-plugins.hierarchy:
* docs/plugins/inspect/plugin-halelements.xml:
* docs/plugins/inspect/plugin-monoscope.xml:
docs: update
2012-09-17 09:48:56 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vpx/gstvp8enc.c:
vp8enc: Correctly finish frames
Previously we would always get the same frame if multiple frames are pending,
leaking memory of the previous frames and breaking timestamps.
2012-09-17 09:40:41 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vpx/gstvp8enc.c:
vp8enc: Allow changing bitrate and other parameters during playback
Fixes bug #648276.
2012-09-17 09:16:39 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vpx/gstvp8enc.c:
* ext/vpx/gstvp8enc.h:
vp8enc: Store configuration in the vpx_codec_enc_cfg_t struct instead of duplicating all variables
Also protect encoder with a mutex.
2012-09-16 16:03:06 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vpx/gstvp8enc.c:
vp8enc: Update documentation to reflect new property names
...and also link to the WebM encoder parameters website.
2012-09-16 15:57:58 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vpx/gstvp8enc.c:
vp8enc: Make some property names more readable
2012-09-16 15:47:16 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* tests/check/elements/.gitignore:
vp8: Add tests to .gitignore
2012-09-16 15:46:31 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* tests/check/elements/vp8enc.c:
vp8enc: Update patch to the new property names
2012-09-16 15:46:22 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* tests/check/Makefile.am:
vpx: Integrate test into the build system too
2012-02-07 17:00:26 +0100 Wim Taymans <wim.taymans@collabora.co.uk>
* tests/check/elements/vp8dec.c:
* tests/check/elements/vp8enc.c:
[MOVED FROM BAD 6/6] tests: fix more unit tests
2011-11-24 21:42:39 +0100 René Stadler <rene.stadler@collabora.co.uk>
* tests/check/elements/vp8dec.c:
* tests/check/elements/vp8enc.c:
[MOVED FROM BAD 5/6] tests: update for gstcheck API change
2010-07-10 15:46:51 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* tests/check/elements/vp8dec.c:
[MOVED FROM BAD 4/6] vp8dec: Add simple unit test for vp8dec
2010-07-10 15:46:43 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* tests/check/elements/vp8enc.c:
[MOVED FROM BAD 3/6] vp8enc: Improve unit test a bit
2010-07-10 15:32:29 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* tests/check/elements/vp8enc.c:
[MOVED FROM BAD 2/6] vp8enc: Also check the output caps in the unit test
2010-07-10 15:29:46 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* tests/check/elements/vp8enc.c:
[MOVED FROM BAD 1/6] vp8enc: Add simple unit test
2012-09-16 15:43:39 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/gst-plugins-good-plugins.hierarchy:
* docs/plugins/gst-plugins-good-plugins.interfaces:
* docs/plugins/inspect/plugin-1394.xml:
* docs/plugins/inspect/plugin-aasink.xml:
* docs/plugins/inspect/plugin-alaw.xml:
* docs/plugins/inspect/plugin-alpha.xml:
* docs/plugins/inspect/plugin-alphacolor.xml:
* docs/plugins/inspect/plugin-apetag.xml:
* docs/plugins/inspect/plugin-audiofx.xml:
* docs/plugins/inspect/plugin-audioparsers.xml:
* docs/plugins/inspect/plugin-auparse.xml:
* docs/plugins/inspect/plugin-autodetect.xml:
* docs/plugins/inspect/plugin-avi.xml:
* docs/plugins/inspect/plugin-cacasink.xml:
* docs/plugins/inspect/plugin-cutter.xml:
* docs/plugins/inspect/plugin-debug.xml:
* docs/plugins/inspect/plugin-deinterlace.xml:
* docs/plugins/inspect/plugin-dv.xml:
* docs/plugins/inspect/plugin-effectv.xml:
* docs/plugins/inspect/plugin-equalizer.xml:
* docs/plugins/inspect/plugin-flac.xml:
* docs/plugins/inspect/plugin-flv.xml:
* docs/plugins/inspect/plugin-flxdec.xml:
* docs/plugins/inspect/plugin-gdkpixbuf.xml:
* docs/plugins/inspect/plugin-goom.xml:
* docs/plugins/inspect/plugin-goom2k1.xml:
* docs/plugins/inspect/plugin-icydemux.xml:
* docs/plugins/inspect/plugin-id3demux.xml:
* docs/plugins/inspect/plugin-imagefreeze.xml:
* docs/plugins/inspect/plugin-interleave.xml:
* docs/plugins/inspect/plugin-isomp4.xml:
* docs/plugins/inspect/plugin-jack.xml:
* docs/plugins/inspect/plugin-jpeg.xml:
* docs/plugins/inspect/plugin-level.xml:
* docs/plugins/inspect/plugin-matroska.xml:
* docs/plugins/inspect/plugin-mulaw.xml:
* docs/plugins/inspect/plugin-multifile.xml:
* docs/plugins/inspect/plugin-multipart.xml:
* docs/plugins/inspect/plugin-navigationtest.xml:
* docs/plugins/inspect/plugin-oss4.xml:
* docs/plugins/inspect/plugin-ossaudio.xml:
* docs/plugins/inspect/plugin-png.xml:
* docs/plugins/inspect/plugin-pulseaudio.xml:
* docs/plugins/inspect/plugin-replaygain.xml:
* docs/plugins/inspect/plugin-rtp.xml:
* docs/plugins/inspect/plugin-rtpmanager.xml:
* docs/plugins/inspect/plugin-rtsp.xml:
* docs/plugins/inspect/plugin-shapewipe.xml:
* docs/plugins/inspect/plugin-shout2send.xml:
* docs/plugins/inspect/plugin-smpte.xml:
* docs/plugins/inspect/plugin-soup.xml:
* docs/plugins/inspect/plugin-spectrum.xml:
* docs/plugins/inspect/plugin-speex.xml:
* docs/plugins/inspect/plugin-taglib.xml:
* docs/plugins/inspect/plugin-udp.xml:
* docs/plugins/inspect/plugin-video4linux2.xml:
* docs/plugins/inspect/plugin-videobox.xml:
* docs/plugins/inspect/plugin-videocrop.xml:
* docs/plugins/inspect/plugin-videofilter.xml:
* docs/plugins/inspect/plugin-videomixer.xml:
* docs/plugins/inspect/plugin-vpx.xml:
* docs/plugins/inspect/plugin-wavenc.xml:
* docs/plugins/inspect/plugin-wavpack.xml:
* docs/plugins/inspect/plugin-wavparse.xml:
* docs/plugins/inspect/plugin-ximagesrc.xml:
* docs/plugins/inspect/plugin-y4menc.xml:
* ext/Makefile.am:
vpx: Integrate into the build system
2012-09-16 15:33:57 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/GstVP8Enc.prs:
* ext/vp8/Makefile.am:
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8dec.h:
* ext/vp8/gstvp8enc.c:
* ext/vp8/gstvp8enc.h:
* ext/vp8/gstvp8utils.c:
* ext/vp8/gstvp8utils.h:
* ext/vp8/plugin.c:
* ext/vpx/GstVP8Enc.prs:
* ext/vpx/Makefile.am:
* ext/vpx/gstvp8dec.c:
* ext/vpx/gstvp8dec.h:
* ext/vpx/gstvp8enc.c:
* ext/vpx/gstvp8enc.h:
* ext/vpx/gstvp8utils.c:
* ext/vpx/gstvp8utils.h:
* ext/vpx/plugin.c:
vpx: Rename vp8 plugin to vpx
This is using libvpx, which can support more codecs than just VP8
and will likely support future codecs.
2012-09-16 15:32:24 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8enc.c:
vp8: Apply remaining changes that got lost while moving the plugin via git am thanks to merges
2012-09-16 15:25:08 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 134/134] vp8dec: Unref input/output states when stopping the decoder
2012-09-16 15:18:20 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/GstVP8Enc.prs:
[MOVED FROM BAD 133/134] vp8enc: Update realtime profile to the new properties
2012-09-16 10:56:07 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 132/134] vp8: Require latest libvpx release (1.1.0 from May 2012)
Fixes bug #684116 and simplifies configure checks.
2012-09-15 20:23:13 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 131/134] vp8enc: Use a string field for the profile in the caps
Just for consistency with all the other codecs.
2012-09-15 00:04:07 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 130/134] vp8enc: Correctly set profile in caps
2012-09-14 23:41:48 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 129/134] vp8: Update copyright and authors
2012-09-08 15:38:40 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
* ext/vp8/gstvp8enc.h:
[MOVED FROM BAD 128/134] vp8enc: Rework encoder properties to be more in line with the libvpx tools and API
Also add all available properties.
2012-09-14 17:08:49 +0200 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 127/134] replace gst_element_class_set_details_simple with gst_element_class_set_metadata
2012-07-19 09:05:28 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 126/134] vp8dec: Call gst_video_decoder_negotiate()
2012-08-14 11:17:25 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8dec.h:
[MOVED FROM BAD 125/134] vp8dec: Add support for multiple decoding threads
2012-08-14 11:09:46 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 124/134] vp8dec: Add support for the MFQE postprocessing flag
Which is enabled by default if postprocessing is enabled.
2012-08-09 13:37:22 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/Makefile.am:
[MOVED FROM BAD 123/134] vp8: Use pkg-config file for getting the LIBS and CFLAGS
2012-08-08 17:06:20 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 122/134] vp8enc: Update the per-component strides for every frame too
This is necessary because of GstVideoAlignment
2012-07-26 19:31:14 +0200 Oleksij Rempel <bug-track@fisher-privat.net>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 121/134] vp8enc: initiate encoder to fix a crash.
Without this patch vp8enc send header before and after first
key frame. On second keyframe vp8dec will crash without getting
decoded frame. With this pipe it is easy to reproduce this issue:
gst-launch-1.0 videotestsrc ! vp8enc ! vp8dec ! fakesink
https://bugzilla.gnome.org/show_bug.cgi?id=680667
2012-07-28 00:32:58 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 120/134] tag: Update for taglist/tag event API changes
2012-07-23 10:35:03 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 119/134] ext: Update for video base classes API changes
2012-07-21 19:59:21 +0200 Oleksij Rempel <bug-track@fisher-privat.net>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 118/134] vp8enc: fix memory leak
unref frame. i hope it is correct place to do it.
Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
2012-07-06 11:50:53 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 117/134] update for query api changes
2012-07-06 11:26:55 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 116/134] update for query api changes
2012-07-06 11:03:04 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 115/134] update for allocation query changes
2012-06-07 12:33:31 +0100 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 114/134] vp8: fix codec state leaks
I only tested that vp8enc ! vp8dec does not crash, as valgrind does not grok
at least one of the instructions used by vp8enc, preventing me from checking
a leak, and the lack of one after the patch.
2012-06-06 13:02:40 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 113/134] update for tag event change
2012-05-28 16:05:21 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8enc.c:
* ext/vp8/gstvp8enc.h:
[MOVED FROM BAD 112/134] vp8: Port to 0.11 again
2012-05-18 12:46:55 +0100 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 111/134] vp8enc: fix target bitrate config with libvpx 1.1.0
libvpx 1.1.0 disallows a bitrate of 0, which was used by
vp8enc as a default value.
Instead, we use the default libvpx bitrate, scaled to our
video size, if no bitrate was specified.
This fixes encoding VP8 video with libvpx 1.1.0.
https://bugzilla.gnome.org/show_bug.cgi?id=676245
2012-05-16 14:04:28 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 110/134] vp8enc: Update for GstVideoCodecFrame API changes
2012-04-27 18:22:42 -0300 Thiago Santos <thiago.sousa.santos@collabora.com>
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8dec.h:
[MOVED FROM BAD 109/134] vp8dec: Improve output_state handling
Avoid getting output_state for every buffer as that requires
getting the objectlock and doing reference counting. Store it locally
when it is created and use it.
2012-04-27 09:05:57 -0300 Thiago Santos <thiago.sousa.santos@collabora.com>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 108/134] vp8dec: Use outputstate when copying output buffer data
Using the input state was causing a crash because the strides/offsets
would be wrong. Fix it by using the output as we are dealing with
the decoded frame.
2012-04-24 11:08:41 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 107/134] vp8: Port to -base video base classes
Conflicts:
ext/vp8/Makefile.am
ext/vp8/gstvp8dec.c
ext/vp8/gstvp8enc.c
Back to 0.10 state for now, need to be ported again.
2012-05-18 12:46:55 +0100 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 106/134] vp8enc: fix target bitrate config with libvpx 1.1.0
libvpx 1.1.0 disallows a bitrate of 0, which was used by
vp8enc as a default value.
Instead, we use the default libvpx bitrate, scaled to our
video size, if no bitrate was specified.
This fixes encoding VP8 video with libvpx 1.1.0.
https://bugzilla.gnome.org/show_bug.cgi?id=676245
2012-04-05 18:02:56 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/plugin.c:
[MOVED FROM BAD 105/134] gst: Update for GST_PLUGIN_DEFINE() API changes
2012-04-04 14:41:22 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/Makefile.am:
[MOVED FROM BAD 104/134] gst: Update versioning
2012-03-06 15:21:17 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 103/134] vp8enc: Fix 'argument to 'sizeof' in 'memset' call is the same expression as the destination' compiler warning
2012-01-30 17:17:16 +0100 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 102/134] update for HEADER flag
2012-01-25 18:49:58 +0100 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 101/134] port some more to new memory API
Fixes #668677.
2012-01-24 11:22:46 +0100 Oleksij Rempel (Alexey Fisher) <bug-track@fisher-privat.net>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 100/134] vp8enc: trace outgoing timestamps
add info level prints for outgoing timestamps.
Signed-off-by: Oleksij Rempel (Alexey Fisher) <bug-track@fisher-privat.net>
2012-01-04 11:05:48 +0100 Oleksij Rempel (Alexey Fisher) <bug-track@fisher-privat.net>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 099/134] vp8dec: use is_alt_data option to prevent timestamp collisions
altref/invisible frames usually stored in container with same timestamp as
dependet frame. This make basevideodecoder to update timestamp for dependet
frame and couse TS colision on next frame:
^- here is altref
time : 1 2 3 4 5 6 7 8 9
webm ts : 1 3 5 5 7 9
vp8dec ts: 1 3 7 7 9
Fix bug: https://bugzilla.gnome.org/show_bug.cgi?id=655245
Signed-off-by: Oleksij Rempel (Alexey Fisher) <bug-track@fisher-privat.net>
2012-01-02 08:28:13 +0100 Oleksij Rempel (Alexey Fisher) <bug-track@fisher-privat.net>
* ext/vp8/GstVP8Enc.prs:
* ext/vp8/Makefile.am:
[MOVED FROM BAD 098/134] vp8: add initial preset file
This is initial preset file, currently with only one profile
for realtime encoding.
Signed-off-by: Oleksij Rempel (Alexey Fisher) <bug-track@fisher-privat.net>
2011-11-28 13:08:27 +0000 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 097/134] various: fix pad template ref leaks
https://bugzilla.gnome.org/show_bug.cgi?id=662664
2011-11-25 11:36:14 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 096/134] vp8dec: use new basevideodecoder API to drop frames and get QoS messages posted
2011-11-10 15:13:34 +0200 Mart Raudsepp <leio@gentoo.org>
* ext/vp8/Makefile.am:
[MOVED FROM BAD 095/134] mimic, opencv, vp8, acmmp3dec, linsys: Don't build static plugins
Pass --tag=disable-static to libtool everywhere where it's been forgotten
https://bugzilla.gnome.org/show_bug.cgi?id=663768
2011-11-03 14:01:41 +0100 Edward Hervey <edward.hervey@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 094/134] vp8: Port to 0.11
2011-08-21 20:15:25 -0700 David Schleef <ds@schleef.org>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 093/134] vp8enc: fix drop-frame property
Fixes #656929.
2011-08-19 19:17:15 +0100 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
* ext/vp8/gstvp8enc.h:
[MOVED FROM BAD 092/134] vp8: probe for the new tuning API to keep building with older libvpx
https://bugzilla.gnome.org/show_bug.cgi?id=656928
2011-08-18 10:39:26 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 091/134] vp8enc: Remove unused and useless variable in tags handling
2011-08-12 12:08:08 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 090/134] vp8enc: Update for basevideoencoder ::get_caps() removal
2011-07-09 18:53:24 -0700 David Schleef <ds@schleef.org>
* ext/vp8/gstvp8enc.c:
* ext/vp8/gstvp8enc.h:
[MOVED FROM BAD 089/134] vp8enc: Add more properties
2011-06-19 16:06:46 +0200 Alexey Fisher <bug-track@fisher-privat.net>
* ext/vp8/gstvp8enc.c:
* ext/vp8/gstvp8enc.h:
[MOVED FROM BAD 088/134] vp8enc: add min/maxsection-pct option
This options should be good to redeuce decode CPU load.
for lowend hardware:
minsection-pct=15 maxsection-pct=400
for hiend hw:
minsection-pct=5 maxsection-pct=800
see example:
http://www.webmproject.org/tools/encoder-parameters/#2-pass_vbr_encoding_for_smooth_playback_on_low-end_hardware
Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net>
Signed-off-by: David Schleef <ds@schleef.org>
2011-06-19 11:05:36 +0200 Alexey Fisher <bug-track@fisher-privat.net>
* ext/vp8/gstvp8enc.c:
* ext/vp8/gstvp8enc.h:
[MOVED FROM BAD 087/134] vp8enc: add lag-in-frames option.
This option set maximum of frames codec should remember,
to make better prediktion for alt-ref frames.
See example:
http://www.webmproject.org/tools/encoder-parameters/#2-pass_best_quality_vbr_encoding
Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net>
Signed-off-by: David Schleef <ds@schleef.org>
2011-06-19 07:16:57 +0200 Alexey Fisher <bug-track@fisher-privat.net>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 086/134] vp8enc: use multipass.cache file name as default for multipass mode.
Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net>
Signed-off-by: David Schleef <ds@schleef.org>
2011-07-21 08:03:51 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 085/134] vp8enc: Update for GstBaseVideoEncoder::finish() signature change
2011-07-12 18:05:25 -0400 Olivier Crête <olivier.crete@collabora.com>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 084/134] vp8: Fix set-but-unused warnings
2011-07-09 11:31:02 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 083/134] vp8enc: Use destroy notify to free the coder hook
2011-06-18 15:56:49 -0700 David Schleef <ds@schleef.org>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 082/134] vp8enc: update for new libvpx api
2011-06-26 15:15:54 +0200 Alexey Fisher <bug-track@fisher-privat.net>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 081/134] vp8enc: generate a timestamp for alt-ref frames.
It will fix handling of altref/invisible frames since matroska-mux
drop any fram with no timestamp.
see also:
http://www.webmproject.org/code/specs/container/
The encoder will currently set the AR's timestamp as close as possible
to the previous frame while attempting to provide a timestamp that is
strictly increasing. In cases where the time base given to the encoder
at configure time is not granular enough to allow for this the AR
will share the same timestamp as D, but should be
treated as having no duration.
Fixes bug #652951
Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net>
2011-06-18 17:47:36 +0200 Alexey Fisher <bug-track@fisher-privat.net>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 080/134] vp8dec: add check if we have legal aspect-ratio before reset it.
the commit f9b552f0494e (vp8dec: set par to 1/1)
will fix situation where no aspect-ratio is set, but it brake
stream with available aspect-ratio. This patch fix it.
Fixes: #652902.
Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net>
2011-06-03 19:36:59 -0700 David Schleef <ds@schleef.org>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 079/134] vp8dec: set par to 1/1
2011-05-18 13:27:20 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 078/134] vp8enc: Name max/min quantizer properties {max,min}-quantizer
Also improve quality property description.
2011-05-18 13:26:23 +0200 Alexey Fisher <bug-track@fisher-privat.net>
* ext/vp8/gstvp8enc.c:
* ext/vp8/gstvp8enc.h:
[MOVED FROM BAD 077/134] vp8enc: Add properties to select a maximum and minimum quantizer
Fixes bug #641405.
2011-05-18 13:18:58 +0200 Alexey Fisher <bug-track@fisher-privat.net>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 076/134] vp8enc: Fix quality to (constant) quantizer mapping
This now allows to select all possible quantizers between
0 and 63.
See bug #641405.
2011-04-01 22:13:55 +0200 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 075/134] vp8dec: debug code style fixes
2011-04-01 22:13:00 +0200 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 074/134] vp8dec: propagate downstream flow return to upstream
2011-03-30 10:18:23 +0200 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 073/134] basevideodecoder: really and only set src pad caps whenever requested
... since subclass is expected to be wise enough to know when to do so.
2011-03-29 10:41:54 +0200 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 072/134] basevideodecoder: invoke subclass start method at state change and use set_format
While this changes API slightly (e.g. actually uses set_format now), which is OK
for unstable API, it has following merits:
* symmetric w.r.t. stop at state change
* in line with other base class practice
* otherwise no subclass method at state change (global activation time)
Moreover, subclassese are either unaffected or trivially adjusted accordingly.
2011-03-28 08:59:20 +0200 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 071/134] basevideodecoder: subsume skip_frame into finish_frame
2011-03-24 14:10:07 +0100 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 070/134] basevideoencoder: provide proper upstream flow return handling
2011-03-24 13:59:35 +0100 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
* ext/vp8/gstvp8enc.h:
[MOVED FROM BAD 069/134] vp8enc: minor optimization in setting up image buffer
2011-03-24 12:50:23 +0100 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 068/134] vp8enc: refactor frame processing
2011-03-24 11:55:41 +0100 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 067/134] vp8enc: do init at set_format time
2011-03-24 10:15:55 +0100 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
* ext/vp8/gstvp8enc.h:
[MOVED FROM BAD 066/134] vp8enc: fix keyframe forcing
2011-03-23 09:45:20 +0100 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 065/134] basevideocodec: remove redundant caps field
... as it is already at hand as the src pad's negotiated caps.
2011-03-23 08:50:31 +0100 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
* ext/vp8/gstvp8enc.h:
[MOVED FROM BAD 064/134] vp8enc: use baseclass event virtual handler
2011-02-20 14:16:18 -0800 David Schleef <ds@schleef.org>
* ext/vp8/gstvp8dec.h:
* ext/vp8/gstvp8enc.h:
[MOVED FROM BAD 063/134] basevideo: merge utils header into basevideocodec
2011-03-17 16:34:02 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* ext/vp8/Makefile.am:
[MOVED FROM BAD 062/134] vp8: fix LIBADD order in Makefile.am
2011-02-04 09:08:26 +0100 Alexey Fisher <bug-track@fisher-privat.net>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 061/134] vp8enc: Add description for bitrate units.
2010-11-30 18:43:24 -0800 David Schleef <ds@schleef.org>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 060/134] vp8enc: Readd setting of granulepos
Revert parts of last patch that removed setting of granulepos.
oggmux still requires correct granulepos in incoming packet.
2010-11-29 20:21:31 -0800 David Schleef <ds@schleef.org>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 059/134] vp8enc: Don't override timestamps set by base class
Because the base class does it correctly.
Fixes: #635720, #625558.
2010-11-25 18:52:47 +0100 Edward Hervey <bilboed@bilboed.com>
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 058/134] vp8: Remove dead assignments
2010-10-09 17:36:07 -0700 David Schleef <ds@schleef.org>
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 057/134] basevideo: Move common fields/functions to basecodec
2010-09-18 17:28:48 -0700 David Schleef <ds@schleef.org>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 056/134] basevideo: Move deadline to frame structure
2010-08-13 14:34:21 +0200 Philip Jägenstedt <philipj@opera.com>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 055/134] vp8dec: Set GstBaseVideoDecoder::packetized to TRUE as soon as possible
This fixes an infinite loop if an EOS event is received before
GstBaseVideoDecoder::start() is called, e.g. immediately when the
pads are activated.
Fixes bug #626815.
2010-07-10 16:52:10 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
* ext/vp8/gstvp8enc.h:
[MOVED FROM BAD 054/134] vp8enc: Add support for enabling automatic insertion of alt-ref frames by the encoder
2010-07-10 16:51:53 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 053/134] vp8enc: Fix handling of invisible/alt ref frames
2010-07-03 17:47:29 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8dec.h:
* ext/vp8/gstvp8enc.c:
* ext/vp8/gstvp8enc.h:
[MOVED FROM BAD 052/134] vp8: Add initial documentation, based on the theoradec/theoraenc documentation
2010-07-03 17:34:58 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/Makefile.am:
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8dec.h:
* ext/vp8/gstvp8enc.c:
* ext/vp8/gstvp8enc.h:
* ext/vp8/plugin.c:
[MOVED FROM BAD 051/134] vp8: Move structure definitions, etc to public header files for gtk-doc
2010-06-12 09:02:29 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 050/134] vp8enc: Implement multipass encoding
Fixes bug #621348.
2010-06-14 15:56:24 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 049/134] vp8enc: Set VP8E_SET_CPUUSED to 0
This setting controls how much CPU can be used by the encoder, specified
in fractions of 16. Negative values mean strict enforcement of this
while positive values are adaptive.
The default value is -4, which means that we're not running as fast
as possible and probably are wasting some quality. 0 is the recommended
default by libvpx upstream.
2010-06-14 15:51:30 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 048/134] vp8enc: Use VPX defines for REALTIME, GOOD/BEST quality deadlines instead of our own
These are the values used for the speed property.
2010-06-03 10:49:40 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 047/134] vp8enc: fix printf format warning in log message
gstvp8enc.c:564: error: format ‘%d’ expects type ‘int’, but argument 8 has type ‘size_t’
gstvp8enc.c:744: error: format ‘%d’ expects type ‘int’, but argument 8 has type ‘size_t’
2009-07-03 16:08:38 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* ext/vp8/Makefile.am:
[MOVED FROM BAD 046/134] basevideo, vp8: guard unstable API with GST_USE_UNSTABLE_API
Add some guards and fat warnings to the header files with still unstable
API, so people who just look at the installed headers know that it
actually is unstable API.
Merging previous commit into current codebase.
2010-06-01 15:54:51 -0700 David Schleef <ds@schleef.org>
* ext/vp8/Makefile.am:
* ext/vp8/gst/video/gstbasevideocodec.c:
* ext/vp8/gst/video/gstbasevideocodec.h:
* ext/vp8/gst/video/gstbasevideodecoder.c:
* ext/vp8/gst/video/gstbasevideodecoder.h:
* ext/vp8/gst/video/gstbasevideoencoder.c:
* ext/vp8/gst/video/gstbasevideoencoder.h:
* ext/vp8/gst/video/gstbasevideoparse.c:
* ext/vp8/gst/video/gstbasevideoparse.h:
* ext/vp8/gst/video/gstbasevideoutils.c:
* ext/vp8/gst/video/gstbasevideoutils.h:
* ext/vp8/gst/video/gstvideocompat.c:
* ext/vp8/gst/video/gstvideocompat.h:
[MOVED FROM BAD 045/134] basevideo: Move base video from vp8 to gst-libs
2010-05-26 06:52:15 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8enc.c:
* ext/vp8/gstvp8utils.h:
[MOVED FROM BAD 044/134] vp8: Use VPX_PLANE_* instead of PLANE_*
2010-05-24 11:04:02 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8utils.h:
[MOVED FROM BAD 043/134] vp8: Add compatilibity defines to work with older versions of libvpx too
2010-05-23 09:28:13 +0200 Philip Jägenstedt <philipj@opera.com>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 042/134] vp8dec: s/IMG_FMT_I420/VPX_IMG_FMT_I420/
This corresponds to upstream libvpx commit 6cd4a10e167203d1deb79abf60ee72599e97891b
2010-05-22 12:55:45 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 041/134] vp8enc: Allow a maximum keyframe distance of 0, i.e. all frames are keyframes
2010-05-22 08:45:35 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 040/134] vp8dec: Set decoder deadline from the QoS information
2010-05-28 16:35:12 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 039/134] vp8enc: Move debug output one line above where the packet is still valid
2010-05-28 15:53:30 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 038/134] vp8enc: Correctly ignore non-frame packets from the encoder
Fixes bug #619916.
2010-05-22 07:44:27 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gst/video/gstbasevideodecoder.c:
[MOVED FROM BAD 037/134] basevideodecoder: Take the frame duration into account when calculating the earliest time
This formula is used in many other elements too.
Fixes bug #619318.
2010-05-22 07:35:01 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gst/video/gstbasevideodecoder.c:
[MOVED FROM BAD 036/134] basevideodecoder: Reset QoS values when necessary
2010-05-22 09:35:24 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 035/134] vp8enc: Use GST_VIDEO_CAPS_YUV(I420) instead of handwritten I420 caps for the pad template
Fixes bug #619344.
2010-05-21 20:53:36 +0200 Philip Jägenstedt <philipj@opera.com>
* ext/vp8/gst/video/gstbasevideodecoder.c:
* ext/vp8/gst/video/gstbasevideodecoder.h:
* ext/vp8/gst/video/gstbasevideoutils.h:
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 034/134] vp8dec: drop late frames after decoding them
This saves a memcpy, which is always something.
2010-05-21 21:28:29 +0200 Philip Jägenstedt <philipj@opera.com>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 033/134] vp8enc: threads property
Increasing from 1 to 2 threads on an Thinkpad X60s decreased encode time
in a test from ~24 s to ~19 s, so this is quite useful.
Ideally we should let 0 be the default and automatically match the number
of CPU cores (or something).
2010-05-21 15:17:46 +0200 Philip Jägenstedt <philipj@opera.com>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 032/134] vp8enc: add mode property to switch between CBR/VBR
Always using CBR when bitrate is used isn't that great, VBR mode
can produce meaningful results too.
2010-05-21 10:54:57 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 031/134] vp8dec: Only enable postprocessing if the decoder supports it
2010-05-21 08:23:58 +0200 Philip Jägenstedt <philipj@opera.com>
* ext/vp8/plugin.c:
[MOVED FROM BAD 030/134] vp8: typo: s/HAVE_VP8_DECODER/HAVE_VP8_ENCODER/
Fixup for bug #619172.
2010-05-21 08:13:06 +0200 Philip Jägenstedt <philipj@opera.com>
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 029/134] vp8: move #ifdef HAVE_VP8_ENCODER/DECODER
Otherwise we'll try including e.g. <vpx/vp8cx.h> which doesn't exist.
2010-05-20 20:06:09 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 028/134] vp8enc: Write GStreamer element and version in the vorbiscomment vendor string
2010-05-20 16:49:03 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8enc.c:
* ext/vp8/plugin.c:
[MOVED FROM BAD 027/134] vp8: Only enable the encoder or decoder if it's available in libvpx
Fixes bug #619172.
2010-05-20 10:19:54 +0200 Philip Jägenstedt <philipj@opera.com>
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8enc.c:
* ext/vp8/plugin.c:
[MOVED FROM BAD 026/134] vp8: exlcude dec/enc based on CONFIG_VP8_DECODER/ENCODER
This may not be very autotoolish, but works with libvpx in the state
that libvpx is actually in. Moved the debug init to the elements
themselves to minimize amount of #ifdefs
2010-05-20 09:24:53 +0200 Philip Jägenstedt <philipj@opera.com>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 025/134] vp8enc: Limit max-latency to 25 to match libvpx
From libvpx/vp8/encoder/onyx_int.h:
#define MAX_LAG_BUFFERS (CONFIG_REALTIME_ONLY? 1 : 25)
While we don't need to be tied to what libvpx does internally, it
doesn't make sense to pretend to support longer frame lags than are
actually possible.
2010-05-20 09:56:25 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8enc.c:
* ext/vp8/gstvp8utils.c:
[MOVED FROM BAD 024/134] vp8: Undef HAVE_CONFIG_H before including libvpx headers
A public libvpx header includes private headers if this is
defined, causing compilation failures because the private headers
are not installed of course.
2010-05-20 08:53:12 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 023/134] vp8enc: Some more minor adjustments for the Ogg mapping
2010-05-19 23:02:19 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 022/134] vp8dec: Fix memory leak
2010-05-19 21:34:42 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 021/134] vp8enc: Adjust Ogg mapping for the changes
2010-05-19 18:12:18 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 020/134] vp8dec: Add properties to control the VP8 decoder post processing feature
This is disabled by default for now.
2010-05-19 17:16:54 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 019/134] vp8enc: Rename keyframe-interval to max-keyframe-distance
And use default settings for buffer sizes until we expose this
somehow.
2010-05-19 17:13:17 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/Makefile.am:
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8enc.c:
* ext/vp8/gstvp8utils.c:
* ext/vp8/gstvp8utils.h:
[MOVED FROM BAD 018/134] vp8: Improve error handling and debug output
2010-05-19 14:46:48 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 017/134] vp8: Use correct strides and plane offsets for GStreamer
2010-05-18 14:47:54 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 016/134] vp8enc: Implement GstTagSetter interface
2010-05-18 14:33:49 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 015/134] vp8enc: Fix setting of the keyframe flag on encoded frames
2010-05-18 14:30:15 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 014/134] vp8enc: Post an error message on the bus if encoder initialization fails
2010-05-18 14:28:55 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 013/134] vp8dec: Fix memory leaks and fail if initializing the decoder fails
2010-05-18 02:44:54 -0700 David Schleef <ds@schleef.org>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 012/134] vp8enc: Set timebase
Also misc cleanup.
2010-05-16 10:36:12 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 011/134] vp8dec: Fix decoding of invisible frames
2010-05-14 14:26:34 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 010/134] vp8enc: Update the latency when initializing the encoder
2010-05-14 14:02:53 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 009/134] vp8dec: Correctly initialize stream info before peeking at the stream
Otherwise peeking will fail and we'll get invalid values
2010-05-14 11:01:29 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 008/134] vp8dec: Make sure to pass a keyframe as first frame to the decoder, copy output frames only once and require width/height/etc on the input caps
2010-05-14 10:30:18 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 007/134] vp8enc: Add support for invisible frames and the Ogg mapping
2010-05-14 01:14:46 -0700 David Schleef <ds@schleef.org>
* ext/vp8/gstvp8dec.c:
[MOVED FROM BAD 006/134] vp8dec: Fix reset after seeking
Also remove some unused code.
2010-05-13 21:19:32 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 005/134] vp8enc: Set frame numbers as buffer offsets
2010-05-13 21:18:08 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 004/134] vp8enc: Always get as many frames as possible from the encoder
2010-05-13 21:08:03 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 003/134] vp8enc: Fill the oldest pending frame instead of the newest
2010-05-13 20:20:32 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/vp8/gstvp8enc.c:
[MOVED FROM BAD 002/134] vp8enc: Correctly set delta unit flag for non-keyframes
2010-05-13 01:04:04 -0700 David Schleef <ds@schleef.org>
* ext/vp8/Makefile.am:
* ext/vp8/gst/video/gstbasevideocodec.c:
* ext/vp8/gst/video/gstbasevideocodec.h:
* ext/vp8/gst/video/gstbasevideodecoder.c:
* ext/vp8/gst/video/gstbasevideodecoder.h:
* ext/vp8/gst/video/gstbasevideoencoder.c:
* ext/vp8/gst/video/gstbasevideoencoder.h:
* ext/vp8/gst/video/gstbasevideoparse.c:
* ext/vp8/gst/video/gstbasevideoparse.h:
* ext/vp8/gst/video/gstbasevideoutils.c:
* ext/vp8/gst/video/gstbasevideoutils.h:
* ext/vp8/gst/video/gstvideocompat.c:
* ext/vp8/gst/video/gstvideocompat.h:
* ext/vp8/gstvp8dec.c:
* ext/vp8/gstvp8enc.c:
* ext/vp8/plugin.c:
[MOVED FROM BAD 001/134] vp8: Add encoder/decoder
2012-09-15 22:16:52 +0200 Christian Fredrik Kalager Schaller <uraeus@linuxrisin.org>
* gst-plugins-good.spec.in:
Update spec file with F18 name change and add deinterlacer
2012-09-15 19:06:06 +0200 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* gst/autodetect/gstautoaudiosink.c:
* gst/autodetect/gstautoaudiosrc.c:
* gst/autodetect/gstautovideosink.c:
* gst/autodetect/gstautovideosrc.c:
use gst_element_factory_get_metadata to replace obsolete API
2012-09-14 17:55:16 +0200 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* sys/osxaudio/gstosxaudiosink.c:
replace _get_caps_reffed with _get_caps
2012-09-14 17:07:26 +0200 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* ext/jpeg/gstjpegdec.c:
* ext/jpeg/gstjpegenc.c:
* ext/libpng/gstpngdec.c:
* ext/libpng/gstpngenc.c:
* tests/check/elements/qtmux.c:
replace gst_element_class_set_details_simple with gst_element_class_set_metadata
2012-09-14 13:30:37 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/jpeg/gstjpegenc.c:
* gst/multipart/multipartmux.c:
* gst/rtp/README:
* gst/videocrop/gstaspectratiocrop.c:
* gst/y4m/gsty4mencode.c:
* tests/examples/equalizer/demo.c:
* tests/examples/rtp/server-VTS-H263p-ATS-PCMA.sh:
* tests/examples/rtp/server-VTS-H263p.sh:
* tests/examples/rtp/server-decodebin-H263p-AMR.sh:
* tests/examples/rtp/server-v4l2-H263p-alsasrc-AMR.sh:
* tests/examples/rtp/server-v4l2-H264-alsasrc-PCMA.sh:
* tests/examples/shapewipe/shapewipe-example.c:
* tests/examples/v4l2/camctrl.c:
* tests/icles/gdkpixbufsink-test.c:
fix more caps
2012-09-14 02:57:44 +0100 Tim-Philipp Müller <tim@centricular.net>
* configure.ac:
Back to development
=== release 0.11.94 ===
2012-09-14 02:48:43 +0100 Tim-Philipp Müller <tim@centricular.net>
* ChangeLog:
* configure.ac:
* gst-plugins-good.doap:
* win32/common/config.h:
Release 0.11.94
2012-09-14 01:50:44 +0100 Tim-Philipp Müller <tim@centricular.net>
* po/af.po:
* po/az.po:
* po/bg.po:
* po/ca.po:
* po/cs.po:
* po/da.po:
* po/de.po:
* po/el.po:
* po/en_GB.po:
* po/eo.po:
* po/es.po:
* po/eu.po:
* po/fi.po:
* po/fr.po:
* po/gl.po:
* po/hu.po:
* po/id.po:
* po/it.po:
* po/ja.po:
* po/lt.po:
* po/lv.po:
* po/mt.po:
* po/nb.po:
* po/nl.po:
* po/or.po:
* po/pl.po:
* po/pt_BR.po:
* po/ro.po:
* po/ru.po:
* po/sk.po:
* po/sl.po:
* po/sq.po:
* po/sr.po:
* po/sv.po:
* po/tr.po:
* po/uk.po:
* po/vi.po:
* po/zh_CN.po:
* po/zh_HK.po:
* po/zh_TW.po:
po: update translations