Tracker offers a number of commandline utilities to manipulate, create, and access SPARQL endpoints and Tracker databases.
tracker3 endpoint
Name
tracker3-endpoint — Create a SPARQL endpoint
Synopsis
tracker3 endpoint [--dbus-service | -b] <service_name> [--database-path | -d] <database_path> [[--ontology | -o] <ontology_name> | [--ontology-path | -p] <ontology_path>] [--http-port] <port> [--loopback] [[--system | --session]]
DESCRIPTION
This command allows creating SPARQL endpoints. The endpoint will be able to handle SPARQL select and update queries, and notify about changes in it.
The endpoint is exported via DBus, accessible through the given service_name, either using it in a SERVICE clause, or by creating a dedicated bus-based SPARQL connection.
When creating a database, the ontology_name (or alternatively, a ontology_path) must be provided in order to generate the database. If ontology_name is used, the ontology must exist in $datadir/tracker/ontologies
Users should be careful about the —http-port option, consider using it only combined with the —loopback option.
The database itself will be stored according to database_path.
OPTIONS
- -b, —dbus-service=<service_name>
- Service name to use on the endpoint.
- -d, —database-path=<database_path>
- The path where the database will be stored.
- -o, —ontology
- The name of an ontology in $datadir/tracker/ontologies to use on the constructed database.
- -p, —ontology-path
- Full path to an ontology to use on the constructed database.
- —session
- Use the session bus. This is the default.
- —system
- Use the system bus.
- -l, —list
- List all SPARQL endpoints available in DBus
- —http-port
- Creates a HTTP endpoint that listens in the specified port
- —loopback
- Allows only HTTP connections in the loopback device. Only effective with HTTP endpoints.
EXAMPLES
Export a Nepomuk endpoint with the org.example.Example1 bus name.
$ tracker3 endpoint -b org.example.Example1 -o nepomuk -d /tmp/example1
Access this endpoint with the tracker3-sparql(1) subcommand.
$ tracker3 sparql --dbus-service org.example.Example1 -q " SELECT ?s ?o WHERE { ?u a ?o }"
Export a Nepomuk endpoint via HTTP.
$ tracker3 endpoint --http-port 8080 -o nepomuk --loopback
Access this endpoint via HTTP.
$ tracker3 sparql --remote-service http://127.0.0.1:8080/sparql -q " SELECT ?u { ?u a rdfs:Resource }"
tracker3 export
Name
tracker3-export — Export all data from a Tracker database.
DESCRIPTION
tracker3 export exports data stored in a Tracker database, in Turtle format. By default all data is exported, if any IRI, only those resources will be printed.
The output is intended to be machine-readable, not human readable. Use a tool such as rapper(1) to convert the data to different formats.
OPTIONS
- -o, —output-format=<RDF_FORMAT>
- Choose which RDF format to use to output results. Supported formats are turtle, trig and json-ld.
- -g, —show-graphs
- Deprecated. Does the same than —output-format trig.
- —2to3
- Helper for migrating data from Tracker 2.x databases. This option takes an argument specifying the scope. Only the “files-starred” argument is available so far.
- —keyfile
- Outputs the data in a key file format. Only may be used with —2to3
tracker3 import
Name
tracker3-import — Import data into a Tracker database.
tracker3 sparql
Name
tracker3-sparql — Use SparQL to query the Tracker databases.
Synopsis
tracker3 sparql -q <sparql> [-u] | -f <file> tracker3 sparql -t [class] [-s <needle>] [-p] tracker3 sparql [-c] [-p] [-x] [-n [class]] [-i [property]] [-s <needle>] tracker3 sparql [--get-longhand <class>] [--get-shorthand <class>]
DESCRIPTION
This command allows probing of the current database schema (also known as ontology) and running low level queries or updates on the data set. In terms of the database ontology, it’s easy to find out what properties are indexed for speed, or notified on changes, what classes are available and the properties belonging to those classes. There are also visual tools to display an ascii tree layout of the classes and their relationships to each other.
When the caller runs a query, the query is in RDF and SPARQL. This can be done two ways. Either by providing a file with the query or by providing a string with the sparql query.
The file argument can be either a local path or a URI. It also does not have to be an absolute path.
OPTIONS
- -f, —file=<file>
- Use a file with SPARQL content to query or update.
- -q, —query=<sparql>
- Use a sparql string to query the database with.
- -u, —update
- This has to be used with —query. This tells “tracker3 sparql” to use the SPARQL update extensions so it knows it isn’t a regular data lookup request. So if your query is intended to change data in the database, this option is needed.
- -c, —list-classes
- Returns a list of classes which describe the ontology used for storing data. These classes are also used in queries. For example, http://www.w3.org/2000/01/rdf-schema#Resource is one of many classes which should be returned here.
- -x, —list-class-prefixes
- Returns a list of classes and their related prefixes. Prefixes are used to make querying a lot simpler and are much like an alias. For example, http://www.w3.org/2000/01/rdf-schema#Resource has the prefix rdfs so queries can be cut down to:
“SELECT ?u WHERE { ?u a rdfs:Resource }”
- -p, —list-properties=[class]
- Returns a list of properties which pertain to a class. You can use both formats here for the class, either the full name http://tracker.api.gnome.org/ontology/v3/nfo#Video or the shortened prefix name nfo:Video.
This gives the following result:
$ tracker3 sparql -p nfo:Video Properties: 2 http://tracker.api.gnome.org/ontology/v3/nfo#frameRate http://tracker.api.gnome.org/ontology/v3/nfo#frameCount
These properties nfo:frameRate and nfo:frameCount can then be used in queries.
See also —tree and —query.
- -n, —list-notifies=[class]
- Returns a list of classes which are notified over D-Bus about any changes that occur in the database. The class does not have to be supplied here. This is optional and filters the results according to any argument supplied. With no class, all classes are listed.
- -i, —list-indexes=[property]
Returns a list of properties which are indexed in the database. Indexes improves query speed but also add an indexing penalty. The property does not have to be supplied here. This is optional and filters the results according to any argument supplied. With no property, all properties are listed.
- -g, —list-graphs:: List all the named graphs in the database. These are used by the filesystem miner to separate metadata so that apps can only see the information relevant to them.
- -t, —tree=[class]
- Prints a tree showing all parent classes of class in the ontology. The class can be provided in shorthand or longhand (see —get-shorthand and —get-longhand for details). For example:
$ tracker3 sparql -t nmo:MMSMessage ROOT +-- rdfs:Resource (C) | +-- nie:InformationElement (C) | | +-- nfo:Document (C) | | | +-- nfo:TextDocument (C) | | | | `-- nmo:Message (C) | | | | | +-- nmo:PhoneMessage (C) | | | | | | `-- nmo:MMSMessage (C)
If no class is given, the entire tree is shown.
The —search command line option can be used to highlight parts of the tree you’re looking for. The search is case insensitive.
The —properties command line option can be used to show properties for each class displayed, for example:
$ tracker3 sparql -t nfo:FileDataObject -p ROOT +-- rdfs:Resource (C) | --> http://purl.org/dc/elements/1.1/contributor (P) | --> http://purl.org/dc/elements/1.1/coverage (P) | --> http://purl.org/dc/elements/1.1/creator (P) | --> http://purl.org/dc/elements/1.1/date (P) | --> http://purl.org/dc/elements/1.1/description (P) | --> http://purl.org/dc/elements/1.1/format (P) | --> http://purl.org/dc/elements/1.1/identifier (P) | --> http://purl.org/dc/elements/1.1/language (P) | --> http://purl.org/dc/elements/1.1/publisher (P) | --> http://purl.org/dc/elements/1.1/relation (P) | --> http://purl.org/dc/elements/1.1/rights (P) | --> http://purl.org/dc/elements/1.1/source (P) | --> http://purl.org/dc/elements/1.1/subject (P) | --> http://purl.org/dc/elements/1.1/title (P) | --> http://purl.org/dc/elements/1.1/type (P) | --> nao:deprecated (P) | --> nao:hasTag (P) | --> nao:identifier (P) | --> nao:isRelated (P) | --> nao:lastModified (P) | --> nao:numericRating (P) | --> rdf:type (P) | --> rdfs:comment (P) | --> rdfs:label (P) | --> nrl:added (P) | --> nrl:damaged (P) | --> nrl:modified (P) | +-- nie:DataObject (C) | | --> nfo:belongsToContainer (P) | | --> nie:byteSize (P) | | --> nie:created (P) | | --> nie:dataSource (P) | | --> nie:interpretedAs (P) | | --> nie:isPartOf (P) | | --> nie:lastRefreshed (P) | | --> nie:url (P) | | --> tracker:available (P) | | +-- nfo:FileDataObject (C) | | | --> nfo:fileCreated (P) | | | --> nfo:fileLastAccessed (P) | | | --> nfo:fileLastModified (P) | | | --> nfo:fileName (P) | | | --> nfo:fileOwner (P) | | | --> nfo:fileSize (P) | | | --> nfo:hasHash (P) | | | --> nfo:permissions (P)
- -s, —search=<needle>
- Returns a list of classes and properties which partially match needle in the ontology. This is a case insensitive match, for example:
$ tracker3 sparql -s text Classes: 4 http://tracker.api.gnome.org/ontology/v3/nfo#TextDocument http://tracker.api.gnome.org/ontology/v3/nfo#PlainTextDocument http://tracker.api.gnome.org/ontology/v3/nfo#PaginatedTextDocument http://tracker.api.gnome.org/ontology/v3/nmm#SynchronizedText Properties: 4 http://tracker.api.gnome.org/ontology/v3/tracker#fulltextIndexed http://tracker.api.gnome.org/ontology/v3/nie#plainTextContent http://tracker.api.gnome.org/ontology/v3/nmo#plainTextMessageContent http://tracker.api.gnome.org/ontology/v3/scal#textLocation
See also —tree.
- —get-shorthand=<class>
- Returns the shorthand for a class given by a URL. For example:
$ tracker3 sparql --get-shorthand http://tracker.api.gnome.org/ontology/v3/nmo#plainTextMessageContent nmo:plainTextMessageContent
- —get-longhand=<class>
- Returns the longhand for a class given in the form of CLASS:PROPERTY. For example:
$ tracker3 sparql --get-longhand nmm:MusicPiece http://tracker.api.gnome.org/ontology/v3/nmm#MusicPiece
EXAMPLES
- List all classes
$ tracker3 sparql -q "SELECT ?cl WHERE { ?cl a rdfs:Class }"
- List all properties for the Resources class (see —list-properties)
$ tracker3 sparql -q "SELECT ?prop WHERE { ?prop a rdf:Property ; rdfs:domain <http://www.w3.org/2000/01/rdf-schema#Resource> }"
- List all class namespace prefixes
$ tracker3 sparql -q "SELECT ?prefix ?ns WHERE { ?ns a nrl:Namespace ; nrl:prefix ?prefix }"
- List all music files
$ tracker3 sparql -q "SELECT ?song WHERE { ?song a nmm:MusicPiece }"
- List all music albums, showing title, track count, and length in seconds.
$ tracker3 sparql -q "SELECT ?title COUNT(?song) AS songs SUM(?length) AS totallength WHERE { ?album a nmm:MusicAlbum ; nie:title ?title . ?song nmm:musicAlbum ?album ; nfo:duration ?length } GROUP BY ?album"
- List all music from a particular artist
$ tracker3 sparql -q "SELECT ?song ?title WHERE { ?song nmm:performer [ nmm:artistName 'Artist Name' ] ; nie:title ?title }"
- Set the played count for a song
$ tracker3 sparql -u -q "DELETE { <file:///home/user/Music/song.mp3> nie:usageCounter ?count } WHERE { <file:///home/user/Music/song.mp3> nie:usageCounter ?count } INSERT { <file:///home/user/Music/song.mp3> nie:usageCounter 42 }"
- List all image files
$ tracker3 sparql -q "SELECT ?image WHERE { ?image a nfo:Image }"
- List all image files with a specific tag
$ tracker3 sparql -q "SELECT ?image WHERE { ?image a nfo:Image ; nao:hasTag [ nao:prefLabel 'tag' ] }"
- List all image files created on a specific month and order by date
$ tracker3 sparql -q "SELECT ?image ?date WHERE { ?image a nfo:Image ; nie:contentCreated ?date . FILTER (?date >= '2008-07-01T00:00:00' && ?date < '2008-08-01T00:00:00') } ORDER BY ?date"
tracker3 sql
Name
tracker3-sql — Use SQL to query the Tracker databases.
DESCRIPTION
This command allows probing of the current database. When using commands like tracker3 sparql, the SPARQL used is translated into SQL before being run on the database. This allows direct use of the database using SQL avoiding the SPARQL engine entirely.
The caller can run a query two ways, either by providing a file with the query or by providing a string with the sql query.
The file argument can be either a local path or a URI. It also does not have to be an absolute path.
OPTIONS
- -f, —file=<file>
- Use a file with SPARQL content to query. Don’t forget to end all queries with a semicolon (;) and also to use quotes around table names. The quotes are important because most tables are named after ontology classes like “nfo:Document” and queries will fail without the quotes.
- -q, —query=<sql>
- Use a sql string to query the database with.