=== release 1.13.90 ===
2018-03-03 22:19:36 +0000 Tim-Philipp Müller <tim@centricular.com>
* NEWS:
* RELEASE:
* configure.ac:
* gst-plugins-good.doap:
* meson.build:
Release 1.13.90
2018-03-03 22:19:36 +0000 Tim-Philipp Müller <tim@centricular.com>
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/inspect/plugin-1394.xml:
* docs/plugins/inspect/plugin-aasink.xml:
* docs/plugins/inspect/plugin-alaw.xml:
* docs/plugins/inspect/plugin-alpha.xml:
* docs/plugins/inspect/plugin-alphacolor.xml:
* docs/plugins/inspect/plugin-apetag.xml:
* docs/plugins/inspect/plugin-audiofx.xml:
* docs/plugins/inspect/plugin-audioparsers.xml:
* docs/plugins/inspect/plugin-auparse.xml:
* docs/plugins/inspect/plugin-autodetect.xml:
* docs/plugins/inspect/plugin-avi.xml:
* docs/plugins/inspect/plugin-cacasink.xml:
* docs/plugins/inspect/plugin-cairo.xml:
* docs/plugins/inspect/plugin-cutter.xml:
* docs/plugins/inspect/plugin-debug.xml:
* docs/plugins/inspect/plugin-deinterlace.xml:
* docs/plugins/inspect/plugin-dtmf.xml:
* docs/plugins/inspect/plugin-dv.xml:
* docs/plugins/inspect/plugin-effectv.xml:
* docs/plugins/inspect/plugin-equalizer.xml:
* docs/plugins/inspect/plugin-flac.xml:
* docs/plugins/inspect/plugin-flv.xml:
* docs/plugins/inspect/plugin-flxdec.xml:
* docs/plugins/inspect/plugin-gdkpixbuf.xml:
* docs/plugins/inspect/plugin-goom.xml:
* docs/plugins/inspect/plugin-goom2k1.xml:
* docs/plugins/inspect/plugin-gtk.xml:
* docs/plugins/inspect/plugin-icydemux.xml:
* docs/plugins/inspect/plugin-id3demux.xml:
* docs/plugins/inspect/plugin-imagefreeze.xml:
* docs/plugins/inspect/plugin-interleave.xml:
* docs/plugins/inspect/plugin-isomp4.xml:
* docs/plugins/inspect/plugin-jack.xml:
* docs/plugins/inspect/plugin-jpeg.xml:
* docs/plugins/inspect/plugin-lame.xml:
* docs/plugins/inspect/plugin-level.xml:
* docs/plugins/inspect/plugin-matroska.xml:
* docs/plugins/inspect/plugin-mpg123.xml:
* docs/plugins/inspect/plugin-mulaw.xml:
* docs/plugins/inspect/plugin-multifile.xml:
* docs/plugins/inspect/plugin-multipart.xml:
* docs/plugins/inspect/plugin-navigationtest.xml:
* docs/plugins/inspect/plugin-oss4.xml:
* docs/plugins/inspect/plugin-ossaudio.xml:
* docs/plugins/inspect/plugin-png.xml:
* docs/plugins/inspect/plugin-pulseaudio.xml:
* docs/plugins/inspect/plugin-qmlgl.xml:
* docs/plugins/inspect/plugin-replaygain.xml:
* docs/plugins/inspect/plugin-rtp.xml:
* docs/plugins/inspect/plugin-rtpmanager.xml:
* docs/plugins/inspect/plugin-rtsp.xml:
* docs/plugins/inspect/plugin-shapewipe.xml:
* docs/plugins/inspect/plugin-shout2.xml:
* docs/plugins/inspect/plugin-smpte.xml:
* docs/plugins/inspect/plugin-soup.xml:
* docs/plugins/inspect/plugin-spectrum.xml:
* docs/plugins/inspect/plugin-speex.xml:
* docs/plugins/inspect/plugin-taglib.xml:
* docs/plugins/inspect/plugin-twolame.xml:
* docs/plugins/inspect/plugin-udp.xml:
* docs/plugins/inspect/plugin-video4linux2.xml:
* docs/plugins/inspect/plugin-videobox.xml:
* docs/plugins/inspect/plugin-videocrop.xml:
* docs/plugins/inspect/plugin-videofilter.xml:
* docs/plugins/inspect/plugin-videomixer.xml:
* docs/plugins/inspect/plugin-vpx.xml:
* docs/plugins/inspect/plugin-wavenc.xml:
* docs/plugins/inspect/plugin-wavpack.xml:
* docs/plugins/inspect/plugin-wavparse.xml:
* docs/plugins/inspect/plugin-ximagesrc.xml:
* docs/plugins/inspect/plugin-y4menc.xml:
Update docs
2018-03-01 18:24:33 -0500 Olivier Crête <olivier.crete@collabora.com>
* gst/flv/gstflvmux.c:
* tests/check/elements/flvmux.c:
flvmux: Duration & unit tests
The muxed buffers will not carry the duration of the
incoming buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=793457
2018-03-01 17:15:02 -0500 Olivier Crête <olivier.crete@collabora.com>
* gst/flv/gstflvmux.c:
flvmux: Set PTS based on running time
https://bugzilla.gnome.org/show_bug.cgi?id=793457
2018-03-01 18:13:20 +0200 Sebastian Dröge <sebastian@centricular.com>
* gst/rtsp/gstrtspsrc.c:
rtspsrc: Ignore sendonly/recvonly attributes unless a backchannel is configured
This works around a bug in various ONVIF cameras that implement the
attributes the wrong way around. They still won't work with a
backchannel but at least normal playback will work for the time being.
It restores pre-1.14 behaviour where we would fail to preroll on any SDP
that lists a recvonly stream. For 1.16 a better solution should be
found.
The problem here is that the ONVIF spec has the meaning of the two
attributes the wrong way around in the examples, compared to RFC4566.
https://bugzilla.gnome.org/show_bug.cgi?id=793715
2018-03-01 18:16:24 +0100 Mathieu Duponchelle <mathieu@centricular.com>
* meson.build:
meson: enable more warnings
https://bugzilla.gnome.org/show_bug.cgi?id=793961
2018-03-01 00:34:20 +0100 Mathieu Duponchelle <mathieu@centricular.com>
* gst/flv/gstflvmux.c:
Port to latest GstAggregator segment API
The aggregator segment is now exposed on the src pad
https://bugzilla.gnome.org/show_bug.cgi?id=793945
2018-03-01 15:34:13 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
* sys/directsound/gstdirectsoundplugin.c:
directsoundsink: Downgrade rank to match directsoundsrc in -bad
As stated in commit c2956036b8da4b8f22a63a4f5a254be03e870aa6 in -bad,
the wasapi elements are now better than directsound, and should be
preferred if they are available.
For a later release, once the elements have more testing, we can
consider moving them to -good.
2018-02-28 19:21:53 +0200 Sebastian Dröge <sebastian@centricular.com>
* gst/matroska/matroska-mux.c:
matroskamux: Only mark new clusters as keyframe if they start on a keyframe or we're muxing only audio
Based on a patch by Nicola Murino <nicola.murino@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=792775
2018-02-28 19:19:10 +0200 Sebastian Dröge <sebastian@centricular.com>
* gst/matroska/matroska-mux.c:
matroskamux: Clip maximum cluster duration to the maximum possible value
Only up to timescale * G_MAXINT16 is possible as cluster duration, which
is already higher than our default value. Using higher values would
cause overflows and broken files.
Based on the investigation by Nicola Murino <nicola.murino@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=792775
2018-02-26 13:03:59 +0200 Sebastian Dröge <sebastian@centricular.com>
* gst/matroska/matroska-mux.c:
matroska-mux: Refuse caps changes after starting to write headers
Matroska does not support changing the stream type and stream properties
after the headers were started to be written, and for example H264
codec_data changes can't be supported.
https://bugzilla.gnome.org/show_bug.cgi?id=782949
2018-02-27 16:33:53 +0100 Mathieu Duponchelle <mathieu@centricular.com>
* tests/check/elements/rtpred.c:
tests: fix redenc tests
The default of the allow-no-red-blocks property was changed in a
previous commit, thus breaking the test assumptions
2018-02-27 13:13:49 +0000 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/rtpulpfeccommon.c:
rtp: fix another debug log printf format warning on 32-bit systems
rtpulpfeccommon.c:432:27: error: format ‘%lx’ expects argument of type
‘long unsigned int’, but argument 10 has type ‘guint64 {aka long long unsigned int}’
https://bugzilla.gnome.org/show_bug.cgi?id=793732
2018-02-26 17:02:52 +0100 Mathieu Duponchelle <mathieu@centricular.com>
* gst/rtpmanager/gstrtpptdemux.c:
rtpptdemux: provide example usage for ignored-payload-types
2018-02-26 16:53:08 +0100 Mathieu Duponchelle <mathieu@centricular.com>
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpptdemux.c:
rtpbin, rtpptdemux: Add missing Since markers
2018-02-26 15:57:28 +0100 Mathieu Duponchelle <mathieu@centricular.com>
* gst/rtp/gstrtpreddec.c:
* gst/rtp/gstrtpredenc.c:
* gst/rtp/gstrtpstorage.c:
* gst/rtp/gstrtpulpfecdec.c:
* gst/rtp/gstrtpulpfecenc.c:
* gst/rtp/gstrtpulpfecenc.h:
FEC elements: document, remove irrelevant properties
The ulpfecenc "mux-seq" and "ssrc" properties were initially added
because the element did more than implement ULPFEC. As it was
decided that FLEXFEC would be implemented in a separate element,
both properties are now unneeded and confusing.
Change the default for the ulpfecenc multi-packet property,
as it is expected that most users of this element will be protecting video
streams.
Change the default property for the rtpredenc allow-no-red-blocks
property, as it should also be its default mode of operation.
https://bugzilla.gnome.org/show_bug.cgi?id=793843
2018-02-24 20:05:05 +0100 Mathieu Duponchelle <mathieu@centricular.com>
* gst/rtp/gstrtpgstdepay.c:
rtpgstdepay: do not warn when caps were not yet received
It is expected that when connecting to a stream that has
already started, the caps will only arrive at the interval
specified on rtpgstpay, we shouldn't be warning as this is
a normal mode of operation.
https://bugzilla.gnome.org/show_bug.cgi?id=793798
2018-02-22 21:53:40 +0100 Arnaud Bonatti <arnaud.bonatti@gmail.com>
* gst/rtp/gstrtpulpfecdec.c:
rtpulpfec: fix debug log printf format warning on 32-bit platforms
https://bugzilla.gnome.org/show_bug.cgi?id=793732
2018-02-22 14:58:12 +0000 Tim-Philipp Müller <tim@centricular.com>
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/gst-plugins-good-plugins.hierarchy:
* docs/plugins/gst-plugins-good-plugins.signals:
* docs/plugins/inspect/plugin-rtp.xml:
* gst/rtp/gstrtpreddec.c:
* gst/rtp/gstrtpredenc.c:
* gst/rtp/gstrtpstorage.c:
* gst/rtp/gstrtpulpfecdec.c:
* gst/rtp/gstrtpulpfecenc.c:
docs: hook up new RTP FEC elements
https://bugzilla.gnome.org/show_bug.cgi?id=792696
2018-02-22 14:57:58 +0000 Tim-Philipp Müller <tim@centricular.com>
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/gst-plugins-good-plugins.signals:
* docs/plugins/inspect/plugin-1394.xml:
* docs/plugins/inspect/plugin-aasink.xml:
* docs/plugins/inspect/plugin-alaw.xml:
* docs/plugins/inspect/plugin-alpha.xml:
* docs/plugins/inspect/plugin-alphacolor.xml:
* docs/plugins/inspect/plugin-apetag.xml:
* docs/plugins/inspect/plugin-audiofx.xml:
* docs/plugins/inspect/plugin-audioparsers.xml:
* docs/plugins/inspect/plugin-auparse.xml:
* docs/plugins/inspect/plugin-autodetect.xml:
* docs/plugins/inspect/plugin-avi.xml:
* docs/plugins/inspect/plugin-cacasink.xml:
* docs/plugins/inspect/plugin-cairo.xml:
* docs/plugins/inspect/plugin-cutter.xml:
* docs/plugins/inspect/plugin-debug.xml:
* docs/plugins/inspect/plugin-deinterlace.xml:
* docs/plugins/inspect/plugin-dtmf.xml:
* docs/plugins/inspect/plugin-dv.xml:
* docs/plugins/inspect/plugin-effectv.xml:
* docs/plugins/inspect/plugin-equalizer.xml:
* docs/plugins/inspect/plugin-flac.xml:
* docs/plugins/inspect/plugin-flv.xml:
* docs/plugins/inspect/plugin-flxdec.xml:
* docs/plugins/inspect/plugin-gdkpixbuf.xml:
* docs/plugins/inspect/plugin-goom.xml:
* docs/plugins/inspect/plugin-goom2k1.xml:
* docs/plugins/inspect/plugin-gtk.xml:
* docs/plugins/inspect/plugin-icydemux.xml:
* docs/plugins/inspect/plugin-id3demux.xml:
* docs/plugins/inspect/plugin-imagefreeze.xml:
* docs/plugins/inspect/plugin-interleave.xml:
* docs/plugins/inspect/plugin-isomp4.xml:
* docs/plugins/inspect/plugin-jack.xml:
* docs/plugins/inspect/plugin-jpeg.xml:
* docs/plugins/inspect/plugin-lame.xml:
* docs/plugins/inspect/plugin-level.xml:
* docs/plugins/inspect/plugin-matroska.xml:
* docs/plugins/inspect/plugin-mpg123.xml:
* docs/plugins/inspect/plugin-mulaw.xml:
* docs/plugins/inspect/plugin-multifile.xml:
* docs/plugins/inspect/plugin-multipart.xml:
* docs/plugins/inspect/plugin-navigationtest.xml:
* docs/plugins/inspect/plugin-oss4.xml:
* docs/plugins/inspect/plugin-ossaudio.xml:
* docs/plugins/inspect/plugin-png.xml:
* docs/plugins/inspect/plugin-pulseaudio.xml:
* docs/plugins/inspect/plugin-qmlgl.xml:
* docs/plugins/inspect/plugin-replaygain.xml:
* docs/plugins/inspect/plugin-rtp.xml:
* docs/plugins/inspect/plugin-rtpmanager.xml:
* docs/plugins/inspect/plugin-rtsp.xml:
* docs/plugins/inspect/plugin-shapewipe.xml:
* docs/plugins/inspect/plugin-shout2.xml:
* docs/plugins/inspect/plugin-smpte.xml:
* docs/plugins/inspect/plugin-soup.xml:
* docs/plugins/inspect/plugin-spectrum.xml:
* docs/plugins/inspect/plugin-speex.xml:
* docs/plugins/inspect/plugin-taglib.xml:
* docs/plugins/inspect/plugin-twolame.xml:
* docs/plugins/inspect/plugin-udp.xml:
* docs/plugins/inspect/plugin-video4linux2.xml:
* docs/plugins/inspect/plugin-videobox.xml:
* docs/plugins/inspect/plugin-videocrop.xml:
* docs/plugins/inspect/plugin-videofilter.xml:
* docs/plugins/inspect/plugin-videomixer.xml:
* docs/plugins/inspect/plugin-vpx.xml:
* docs/plugins/inspect/plugin-wavenc.xml:
* docs/plugins/inspect/plugin-wavpack.xml:
* docs/plugins/inspect/plugin-wavparse.xml:
* docs/plugins/inspect/plugin-ximagesrc.xml:
* docs/plugins/inspect/plugin-y4menc.xml:
docs: update for git master
2018-02-22 10:54:02 +0000 Tim-Philipp Müller <tim@centricular.com>
* .gitignore:
* tests/check/elements/.gitignore:
.gitignore more test binaries
2018-02-21 20:46:10 +0000 Tim-Philipp Müller <tim@centricular.com>
* tests/check/Makefile.am:
tests: also dist new fec test header file
2018-02-21 20:44:26 +0000 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/Makefile.am:
rtp: dist new header files
Fixes make distcheck
2018-02-21 18:52:44 +0000 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/gstrtpreddec.c:
* gst/rtp/gstrtpstorage.c:
* gst/rtp/gstrtpulpfecdec.c:
* gst/rtp/gstrtpulpfecenc.c:
* gst/rtp/rtpulpfeccommon.c:
* gst/rtp/rtpulpfeccommon.h:
rtp: fec: fix build with gstreamer debug log system disabled
2018-02-21 19:59:04 +0100 Mathieu Duponchelle <mathieu@centricular.com>
* gst/rtpmanager/gstrtpptdemux.c:
rtpptdemux: do no assume sink caps are non NULL
2018-02-21 18:51:17 +0100 Mathieu Duponchelle <mathieu@centricular.com>
* tests/check/Makefile.am:
check: Fix ulpfec test build
The test name was updated but not the build definition
2017-11-28 06:02:05 +0100 Mathieu Duponchelle <mathieu@centricular.com>
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpbin.h:
rtpbin: Expose FEC support signals
Also slightly refactor complete_session_src
https://bugzilla.gnome.org/show_bug.cgi?id=792696
2017-11-17 03:52:03 +0100 Mikhail Fludkov <misha@pexip.com>
* gst/rtp/Makefile.am:
* gst/rtp/gstrtp.c:
* gst/rtp/gstrtpreddec.c:
* gst/rtp/gstrtpreddec.h:
* gst/rtp/gstrtpredenc.c:
* gst/rtp/gstrtpredenc.h:
* gst/rtp/gstrtpstorage.c:
* gst/rtp/gstrtpstorage.h:
* gst/rtp/gstrtpulpfecdec.c:
* gst/rtp/gstrtpulpfecdec.h:
* gst/rtp/gstrtpulpfecenc.c:
* gst/rtp/gstrtpulpfecenc.h:
* gst/rtp/meson.build:
* gst/rtp/rtpredcommon.c:
* gst/rtp/rtpredcommon.h:
* gst/rtp/rtpstorage.c:
* gst/rtp/rtpstorage.h:
* gst/rtp/rtpstoragestream.c:
* gst/rtp/rtpstoragestream.h:
* gst/rtp/rtpulpfeccommon.c:
* gst/rtp/rtpulpfeccommon.h:
* tests/check/Makefile.am:
* tests/check/elements/packets.h:
* tests/check/elements/rtpred.c:
* tests/check/elements/rtpstorage.c:
* tests/check/elements/rtpulpfec.c:
* tests/check/meson.build:
rtp: Implement ULPFEC (RFC 5109)
We expose a set of new elements:
* ULPFEC encoder / decoder
* A storage element, which should be placed before jitterbuffers,
and is used to store packets in order to attempt reconstruction
after the jitterbuffer has sent PacketLost events
* RED encoder / decoder (RFC 2198), these are necessary to
use FEC in webrtc, as browsers will propose and expect ulpfec
packets to be wrapped in red packets
With contributions from:
Mathieu Duponchelle <mathieu@centricular.com>
Sebastian Dröge <sebastian@centricular.com>
https://bugzilla.gnome.org/show_bug.cgi?id=792696
2017-11-28 01:11:54 +0100 Mathieu Duponchelle <mathieu@centricular.com>
* gst/rtpmanager/gstrtpptdemux.c:
* gst/rtpmanager/gstrtpptdemux.h:
rtpptdemux: Add ignored-payload-types property
Packets with these payload types will be dropped. A use case
for this is FEC, where we want FEC packets to go through the
jitterbuffer, but not be output by rtpbin.
https://bugzilla.gnome.org/show_bug.cgi?id=792696
2017-11-20 18:08:38 +0100 Mathieu Duponchelle <mathieu@centricular.com>
* gst/rtpmanager/gstrtpptdemux.c:
rtpptdemux: Add ssrc to output caps
It may be useful downstream
https://bugzilla.gnome.org/show_bug.cgi?id=792696
2018-02-21 11:12:10 +0100 Arnaud Bonatti <arnaud.bonatti@gmail.com>
* ext/gtk/gstgtkbasesink.c:
gtk: fix compiler warning with recent glib
https://bugzilla.gnome.org/show_bug.cgi?id=793688
2018-02-21 11:35:33 +1100 Matthew Waters <matthew@centricular.com>
* ext/qt/gstqtglutility.cc:
qt: don't use libEGL functions when we don't link to libEGL
Use the provided wrapper available from libgstgl.
https://bugzilla.gnome.org/show_bug.cgi?id=793547
2018-02-18 21:38:13 +0100 Sebastian Dröge <sebastian@centricular.com>
* gst/monoscope/gstmonoscope.c:
* gst/monoscope/gstmonoscope.h:
monoscope: Forward the SEGMENT event from the chain function
Otherwise we'll break the event order and forward the SEGMENT event
before sending a CAPS event.
2018-02-16 12:25:29 +0000 James Stevenson <james@stev.org>
* gst/rtsp/gstrtspsrc.c:
rtspsrc: Fix missing read property of backchannel
Add missing read property code for backchannel
https://bugzilla.gnome.org/show_bug.cgi?id=793507
2018-02-16 09:42:59 +0000 Tim-Philipp Müller <tim@centricular.com>
* tests/examples/rtsp/meson.build:
examples: rtsp: fix meson build take 2
2018-02-16 11:30:01 +0200 Sebastian Dröge <sebastian@centricular.com>
* tests/examples/rtsp/meson.build:
rtsp: Fix meson.build of the example
2018-01-26 16:33:21 +0200 Sebastian Dröge <sebastian@centricular.com>
* gst/rtsp/gstrtspsrc.c:
rtspsrc: Implement ONVIF backchannel support via TCP
2017-10-13 18:05:54 +0300 Nirbheek Chauhan <nirbheek@centricular.com>
* configure.ac:
* gst/rtsp/gstrtspsrc.c:
* gst/rtsp/gstrtspsrc.h:
* tests/examples/Makefile.am:
* tests/examples/meson.build:
* tests/examples/rtsp/Makefile.am:
* tests/examples/rtsp/meson.build:
* tests/examples/rtsp/test-onvif.c:
rtspsrc: Implement ONVIF backchannel support
Set backchannel=onvif to enable, and use the 'push-backchannel-sample'
action signal with the correct stream id.
2018-02-16 01:49:57 +1100 Jan Schmidt <jan@centricular.com>
* gst/multifile/gstsplitmuxsrc.c:
* gst/multifile/gstsplitmuxsrc.h:
splitmuxsrc: Improve not-linked handling.
Don't report not-linked unless all pads have
returned not-linked.
2018-02-15 19:44:19 +0000 Tim-Philipp Müller <tim@centricular.com>
* configure.ac:
* docs/plugins/inspect/plugin-1394.xml:
* docs/plugins/inspect/plugin-aasink.xml:
* docs/plugins/inspect/plugin-alaw.xml:
* docs/plugins/inspect/plugin-alpha.xml:
* docs/plugins/inspect/plugin-alphacolor.xml:
* docs/plugins/inspect/plugin-apetag.xml:
* docs/plugins/inspect/plugin-audiofx.xml:
* docs/plugins/inspect/plugin-audioparsers.xml:
* docs/plugins/inspect/plugin-auparse.xml:
* docs/plugins/inspect/plugin-autodetect.xml:
* docs/plugins/inspect/plugin-avi.xml:
* docs/plugins/inspect/plugin-cacasink.xml:
* docs/plugins/inspect/plugin-cairo.xml:
* docs/plugins/inspect/plugin-cutter.xml:
* docs/plugins/inspect/plugin-debug.xml:
* docs/plugins/inspect/plugin-deinterlace.xml:
* docs/plugins/inspect/plugin-dtmf.xml:
* docs/plugins/inspect/plugin-dv.xml:
* docs/plugins/inspect/plugin-effectv.xml:
* docs/plugins/inspect/plugin-equalizer.xml:
* docs/plugins/inspect/plugin-flac.xml:
* docs/plugins/inspect/plugin-flv.xml:
* docs/plugins/inspect/plugin-flxdec.xml:
* docs/plugins/inspect/plugin-gdkpixbuf.xml:
* docs/plugins/inspect/plugin-goom.xml:
* docs/plugins/inspect/plugin-goom2k1.xml:
* docs/plugins/inspect/plugin-gtk.xml:
* docs/plugins/inspect/plugin-icydemux.xml:
* docs/plugins/inspect/plugin-id3demux.xml:
* docs/plugins/inspect/plugin-imagefreeze.xml:
* docs/plugins/inspect/plugin-interleave.xml:
* docs/plugins/inspect/plugin-isomp4.xml:
* docs/plugins/inspect/plugin-jack.xml:
* docs/plugins/inspect/plugin-jpeg.xml:
* docs/plugins/inspect/plugin-lame.xml:
* docs/plugins/inspect/plugin-level.xml:
* docs/plugins/inspect/plugin-matroska.xml:
* docs/plugins/inspect/plugin-mpg123.xml:
* docs/plugins/inspect/plugin-mulaw.xml:
* docs/plugins/inspect/plugin-multifile.xml:
* docs/plugins/inspect/plugin-multipart.xml:
* docs/plugins/inspect/plugin-navigationtest.xml:
* docs/plugins/inspect/plugin-oss4.xml:
* docs/plugins/inspect/plugin-ossaudio.xml:
* docs/plugins/inspect/plugin-png.xml:
* docs/plugins/inspect/plugin-pulseaudio.xml:
* docs/plugins/inspect/plugin-qmlgl.xml:
* docs/plugins/inspect/plugin-replaygain.xml:
* docs/plugins/inspect/plugin-rtp.xml:
* docs/plugins/inspect/plugin-rtpmanager.xml:
* docs/plugins/inspect/plugin-rtsp.xml:
* docs/plugins/inspect/plugin-shapewipe.xml:
* docs/plugins/inspect/plugin-shout2.xml:
* docs/plugins/inspect/plugin-smpte.xml:
* docs/plugins/inspect/plugin-soup.xml:
* docs/plugins/inspect/plugin-spectrum.xml:
* docs/plugins/inspect/plugin-speex.xml:
* docs/plugins/inspect/plugin-taglib.xml:
* docs/plugins/inspect/plugin-twolame.xml:
* docs/plugins/inspect/plugin-udp.xml:
* docs/plugins/inspect/plugin-video4linux2.xml:
* docs/plugins/inspect/plugin-videobox.xml:
* docs/plugins/inspect/plugin-videocrop.xml:
* docs/plugins/inspect/plugin-videofilter.xml:
* docs/plugins/inspect/plugin-videomixer.xml:
* docs/plugins/inspect/plugin-vpx.xml:
* docs/plugins/inspect/plugin-wavenc.xml:
* docs/plugins/inspect/plugin-wavpack.xml:
* docs/plugins/inspect/plugin-wavparse.xml:
* docs/plugins/inspect/plugin-ximagesrc.xml:
* docs/plugins/inspect/plugin-y4menc.xml:
* meson.build:
Back to development
=== release 1.13.1 ===
2018-02-15 17:06:10 +0000 Tim-Philipp Müller <tim@centricular.com>
* NEWS:
* configure.ac:
* gst-plugins-good.doap:
* meson.build:
Release 1.13.1
2018-02-15 17:05:23 +0000 Tim-Philipp Müller <tim@centricular.com>
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/inspect/plugin-1394.xml:
* docs/plugins/inspect/plugin-aasink.xml:
* docs/plugins/inspect/plugin-alaw.xml:
* docs/plugins/inspect/plugin-alpha.xml:
* docs/plugins/inspect/plugin-alphacolor.xml:
* docs/plugins/inspect/plugin-apetag.xml:
* docs/plugins/inspect/plugin-audiofx.xml:
* docs/plugins/inspect/plugin-audioparsers.xml:
* docs/plugins/inspect/plugin-auparse.xml:
* docs/plugins/inspect/plugin-autodetect.xml:
* docs/plugins/inspect/plugin-avi.xml:
* docs/plugins/inspect/plugin-cacasink.xml:
* docs/plugins/inspect/plugin-cairo.xml:
* docs/plugins/inspect/plugin-cutter.xml:
* docs/plugins/inspect/plugin-debug.xml:
* docs/plugins/inspect/plugin-deinterlace.xml:
* docs/plugins/inspect/plugin-dtmf.xml:
* docs/plugins/inspect/plugin-dv.xml:
* docs/plugins/inspect/plugin-effectv.xml:
* docs/plugins/inspect/plugin-equalizer.xml:
* docs/plugins/inspect/plugin-flac.xml:
* docs/plugins/inspect/plugin-flv.xml:
* docs/plugins/inspect/plugin-flxdec.xml:
* docs/plugins/inspect/plugin-gdkpixbuf.xml:
* docs/plugins/inspect/plugin-goom.xml:
* docs/plugins/inspect/plugin-goom2k1.xml:
* docs/plugins/inspect/plugin-gtk.xml:
* docs/plugins/inspect/plugin-icydemux.xml:
* docs/plugins/inspect/plugin-id3demux.xml:
* docs/plugins/inspect/plugin-imagefreeze.xml:
* docs/plugins/inspect/plugin-interleave.xml:
* docs/plugins/inspect/plugin-isomp4.xml:
* docs/plugins/inspect/plugin-jack.xml:
* docs/plugins/inspect/plugin-jpeg.xml:
* docs/plugins/inspect/plugin-lame.xml:
* docs/plugins/inspect/plugin-level.xml:
* docs/plugins/inspect/plugin-matroska.xml:
* docs/plugins/inspect/plugin-mpg123.xml:
* docs/plugins/inspect/plugin-mulaw.xml:
* docs/plugins/inspect/plugin-multifile.xml:
* docs/plugins/inspect/plugin-multipart.xml:
* docs/plugins/inspect/plugin-navigationtest.xml:
* docs/plugins/inspect/plugin-oss4.xml:
* docs/plugins/inspect/plugin-ossaudio.xml:
* docs/plugins/inspect/plugin-png.xml:
* docs/plugins/inspect/plugin-pulseaudio.xml:
* docs/plugins/inspect/plugin-qmlgl.xml:
* docs/plugins/inspect/plugin-replaygain.xml:
* docs/plugins/inspect/plugin-rtp.xml:
* docs/plugins/inspect/plugin-rtpmanager.xml:
* docs/plugins/inspect/plugin-rtsp.xml:
* docs/plugins/inspect/plugin-shapewipe.xml:
* docs/plugins/inspect/plugin-shout2.xml:
* docs/plugins/inspect/plugin-smpte.xml:
* docs/plugins/inspect/plugin-soup.xml:
* docs/plugins/inspect/plugin-spectrum.xml:
* docs/plugins/inspect/plugin-speex.xml:
* docs/plugins/inspect/plugin-taglib.xml:
* docs/plugins/inspect/plugin-twolame.xml:
* docs/plugins/inspect/plugin-udp.xml:
* docs/plugins/inspect/plugin-video4linux2.xml:
* docs/plugins/inspect/plugin-videobox.xml:
* docs/plugins/inspect/plugin-videocrop.xml:
* docs/plugins/inspect/plugin-videofilter.xml:
* docs/plugins/inspect/plugin-videomixer.xml:
* docs/plugins/inspect/plugin-vpx.xml:
* docs/plugins/inspect/plugin-wavenc.xml:
* docs/plugins/inspect/plugin-wavpack.xml:
* docs/plugins/inspect/plugin-wavparse.xml:
* docs/plugins/inspect/plugin-ximagesrc.xml:
* docs/plugins/inspect/plugin-y4menc.xml:
docs: update plugin docs
2018-02-15 13:32:20 +0000 Tim-Philipp Müller <tim@centricular.com>
* po/bg.po:
* po/cs.po:
* po/da.po:
* po/de.po:
* po/el.po:
* po/fr.po:
* po/hr.po:
* po/hu.po:
* po/nb.po:
* po/nl.po:
* po/pl.po:
* po/ru.po:
* po/sr.po:
* po/sv.po:
* po/tr.po:
* po/uk.po:
* po/vi.po:
* po/zh_CN.po:
po: update translations
2018-02-14 16:38:07 +0100 Patrick Radizi <patrickr@axis.com>
* gst/rtpmanager/gstrtpjitterbuffer.c:
rtpjitterbuffer: allow timestamps to move backwards
The original solution for #784002 incorrectly assumed that timestamps
may not move backwards and changed timestamps that did so.
https://bugzilla.gnome.org/show_bug.cgi?id=784002
2018-02-15 00:58:38 +0000 Tim-Philipp Müller <tim@centricular.com>
* ext/lame/gstlamemp3enc.c:
* gst/flv/gstindex.c:
* sys/v4l2/gstv4l2src.c:
docs: remove pointless Since: 0.10.x markers
2017-09-27 16:01:35 +0200 Alban Bedel <alban.bedel@avionic-design.de>
* gst/rtp/gstrtpvorbisdepay.c:
rtpvorbisdepay: fix unbounded memory usage
All received configurations are parsed and added to a list, this lead
to an unbounded memory usage. As the configuration is resent every
second this quickly lead to a large memory usage.
Add a check to only add the config if it is not already available in
the list. This fix only handle the typical case of a well behaved
stream, a malicious server could still send many useless
configurations to raise the client memory usage.
2018-02-12 18:41:41 +0000 Tim-Philipp Müller <tim@centricular.com>
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/gst-plugins-good-plugins.hierarchy:
* docs/plugins/inspect/plugin-qmlgl.xml:
docs: add qt plugin
https://bugzilla.gnome.org/show_bug.cgi?id=754094
2018-02-12 18:34:16 +0000 Tim-Philipp Müller <tim@centricular.com>
* configure.ac:
* ext/Makefile.am:
* ext/meson.build:
* tests/examples/meson.build:
qt: hook up to build
https://bugzilla.gnome.org/show_bug.cgi?id=754094
2018-02-12 18:13:17 +0000 Tim-Philipp Müller <tim@centricular.com>
Move qt plugin from -bad
https://bugzilla.gnome.org/show_bug.cgi?id=754094
2018-02-12 15:44:35 +0000 Tim-Philipp Müller <tim@centricular.com>
* configure.ac:
configure: fix build with --disable-external
2018-02-10 20:31:49 +0000 Tim-Philipp Müller <tim@centricular.com>
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/inspect/plugin-gtk.xml:
docs: add moved gtk plugin to docs
2018-02-10 20:28:46 +0000 Tim-Philipp Müller <tim@centricular.com>
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/gst-plugins-good-plugins.hierarchy:
* docs/plugins/gst-plugins-good-plugins.interfaces:
* docs/plugins/gst-plugins-good-plugins.prerequisites:
* docs/plugins/inspect/plugin-deinterlace.xml:
docs: update for git master
2018-02-12 11:02:12 +0000 Tim-Philipp Müller <tim@centricular.com>
* ext/gtk/meson.build:
* ext/meson.build:
* meson.build:
* tests/examples/meson.build:
gtk: hook up to meson build
2018-02-10 13:20:43 +0000 Tim-Philipp Müller <tim@centricular.com>
* configure.ac:
* ext/Makefile.am:
* ext/gtk/Makefile.am:
* tests/examples/Makefile.am:
* tests/examples/gtk/.gitignore:
* tests/examples/gtk/Makefile.am:
gtk: hook up to autotools build
2018-02-10 12:49:36 +0000 Tim-Philipp Müller <tim@centricular.com>
Move gtk plugin from -bad
https://bugzilla.gnome.org/show_bug.cgi?id=754094
2018-02-09 11:26:56 +0100 Edward Hervey <edward@centricular.com>
* gst/isomp4/qtdemux.c:
qtdemux: Fix comment typo in previous commit
2018-02-09 11:20:38 +0100 Edward Hervey <edward@centricular.com>
* gst/isomp4/qtdemux.c:
qtdemux: More 'meta' atom parsing fixes
Turns out everybody is doing it their own way, so peek into the
meta atom itself to figure out which spec it is following
2018-02-02 13:51:49 +0200 Sebastian Dröge <sebastian@centricular.com>
* gst/isomp4/atoms.c:
* gst/isomp4/atoms.h:
* gst/isomp4/gstqtmux.c:
qtmux: Add support for muxing svmi atom for stereoscopic video information
https://bugzilla.gnome.org/show_bug.cgi?id=793120
2018-02-09 08:59:56 +0100 Edward Hervey <edward@centricular.com>
* gst/isomp4/qtdemux.c:
qtdemux: Minor cleanup
Just move variables to the blocks where they are used.
That function is massive, could do with some splitting up for
readability :(
2018-02-09 08:54:05 +0100 Edward Hervey <edward@centricular.com>
* gst/isomp4/qtdemux.c:
qtdemux: Cope with difference between QTFF and ISO BMFF specs
The 'meta' atom is defined differently in QTFF and BMFF, so try
to guess which spec the current stream applies to by looking
at the major file type.
2018-02-09 08:35:52 +0100 Edward Hervey <edward@centricular.com>
* gst/isomp4/qtdemux_dump.c:
isomp4: Make 'hdlr' atom dump more flexible
The smallest possible is 24 (and not 25) bytes.
The last "name" field can according to QTFF specifications not be present
at all. The parser will handle this fine and so will the rest of
the qtdemux code.
2018-02-09 08:35:25 +0100 Edward Hervey <edward@centricular.com>
* gst/audiofx/audiopanoramaorc-dist.c:
* gst/deinterlace/tvtime-dist.c:
* gst/videobox/gstvideoboxorc-dist.c:
* gst/videomixer/videomixerorc-dist.c:
Update ORC files
2018-02-08 19:09:45 +0000 Tim-Philipp Müller <tim@centricular.com>
* meson.build:
meson: make version numbers ints and fix int/string comparison
WARNING: Trying to compare values of different types (str, int).
The result of this is undefined and will become a hard error
in a future Meson release.
2017-10-01 18:21:26 +0200 Jérôme Laheurte <jerome@jeromelaheurte.net>
* sys/osxvideo/cocoawindow.m:
* sys/osxvideo/osxvideosink.m:
osxvideosink: fix build on macOS versions < 12.0
Use value instead of version macro when testing for mac OS version,
since the define for the newer version may not be defined when
compiling against older versions.
https://bugzilla.gnome.org/show_bug.cgi?id=788402
2018-02-07 20:15:00 +1100 Matthew Waters <matthew@centricular.com>
* ext/qt/gstqtglutility.cc:
qt: don't #include platform specific gstglcontext_*.h headers
They aren't public headers
2018-02-04 11:47:05 +0100 Tim-Philipp Müller <tim@centricular.com>
* configure.ac:
* tests/check/Makefile.am:
autotools: use -fno-strict-aliasing where supported
https://bugzilla.gnome.org/show_bug.cgi?id=769183
2017-12-04 20:12:40 +0900 Justin Kim <justin.kim@collabora.com>
* gst/isomp4/gstqtmux.c:
* gst/multifile/gstsplitmuxsink.c:
qtmux: send stream warning when refusing video caps
If codec_data is changed, the stream is no longer valid.
Rather than keeping running when refusing new caps,
this patch send a warning to the bus.
Also fix up splitmuxsink to ignore this warning while changing caps.
https://bugzilla.gnome.org/show_bug.cgi?id=790000
2017-11-29 21:30:11 +0900 Justin Kim <justin.kim@collabora.com>
* gst/rtp/gstrtph264depay.c:
rtph264depay: update output caps regardless format
`codec_data` should be transfered if any information of
SPS/PPS is changed.
https://bugzilla.gnome.org/show_bug.cgi?id=790000
2018-01-31 19:11:16 +0100 Edward Hervey <edward@centricular.com>
* gst/isomp4/qtdemux_dump.c:
* gst/isomp4/qtdemux_dump.h:
* gst/isomp4/qtdemux_types.c:
isomp4: Add gmhd/gmin debugging
* gmhd is a container, mark it as such so we can see/dump
what is contained within
* Add dumping for the Base Media Information atom (gmin)
2015-09-23 10:01:32 +0200 Matthieu Crapet <mcrapet@gmail.com>
* ext/jpeg/gstjpegenc.c:
* ext/jpeg/gstjpegenc.h:
jpegenc: add snapshot property
Like pngenc, automatically send an EOS message.
Example of bin:
appsrc ! jpegenc snapshot=true ! filesink location=out.jpg
This is especially useful for limited/slow hardware.
Otherwise calling gst_video_convert_sample() is a better option
(internally uses videoconvert and videoscale).
https://bugzilla.gnome.org/show_bug.cgi?id=755453
2018-01-31 15:02:50 +0000 Philippe Normand <philn@igalia.com>
* gst/interleave/interleave.c:
interleave: fix memory leak of GAP buffers
https://bugzilla.gnome.org/show_bug.cgi?id=793067
2018-01-31 11:38:35 +0100 Edward Hervey <edward@centricular.com>
* gst/isomp4/qtdemux_dump.c:
qtdemux_dump: Demote verbose logging to TRACE level
2018-01-31 11:22:23 +0100 Edward Hervey <edward@centricular.com>
* gst/isomp4/qtdemux_dump.c:
qtdemux: Re-enable full debug logging of stsz entries
No idea why it was disabled (was the case since 2007)
2018-01-30 20:34:32 +0000 Tim-Philipp Müller <tim@centricular.com>
* ext/taglib/meson.build:
* meson.build:
meson: use -fno-strict-aliasing where supported
https://bugzilla.gnome.org/show_bug.cgi?id=769183
2017-12-12 00:14:02 +0900 Seungha Yang <pudding8757@gmail.com>
* gst/isomp4/qtdemux.h:
qtdemux: Remove white space at end of line
https://bugzilla.gnome.org/show_bug.cgi?id=791483
2017-12-12 00:11:24 +0900 Seungha Yang <pudding8757@gmail.com>
* gst/isomp4/Makefile.am:
* gst/isomp4/gstisoff.c:
* gst/isomp4/qtdemux.c:
* gst/isomp4/qtdemux.h:
* gst/isomp4/qtdemux_debug.h:
* gst/isomp4/qtdemux_dump.c:
* gst/isomp4/qtdemux_lang.c:
* gst/isomp4/qtdemux_types.c:
qtdemux: Apply qtdemux debug category to gstisoff
.. instead of the use of default debug category.
And, make new header to declare the debug category
https://bugzilla.gnome.org/show_bug.cgi?id=791483
2018-01-25 00:46:57 +0000 Tim-Philipp Müller <tim@centricular.com>
* gst/multifile/gstsplitmuxsrc.c:
splitmuxsrc: properly set total duration on outgoing segment
We would accidentally pass through the duration value from the
demuxer from a single fragment, which causes problems when
feeding the stream from splitmuxsrc to rtsp-server. Streaming
would stop after one fragment due to that.
https://bugzilla.gnome.org/show_bug.cgi?id=792861
2018-01-25 00:42:52 +0000 Tim-Philipp Müller <tim@centricular.com>
* gst/multifile/gstsplitmuxsrc.c:
splitmuxsrc: don't respond to duration query with CLOCK_TIME_NONE
total_duration is initialised to CLOCK_TIME_NONE, not 0, so check
for that as well in order not to return an invalid duration to
a duration query. Doesn't fix anything particular observed in
practice, just seemed inconsistent.
2018-01-25 20:48:42 +0100 Alicia Boya García <aboya@igalia.com>
* gst/isomp4/qtdemux.c:
qtdemux: Add more prose to the comment of gst_qtdemux_find_sample()
https://bugzilla.gnome.org/show_bug.cgi?id=792910
2011-02-09 12:48:00 +0000 Oleksij Rempel <linux@rempel-privat.de>
* ext/vpx/gstvpxdec.c:
vpx: add VP8_DEBUG_TXT_* flags for postprocessing
https://bugzilla.gnome.org/show_bug.cgi?id=641399
2018-01-25 21:22:10 +0200 Sebastian Dröge <sebastian@centricular.com>
* sys/directsound/gstdirectsoundsink.h:
directsoundsink: Add missing \ in multi-line #define
2018-01-22 15:07:38 +0200 Sebastian Dröge <sebastian@centricular.com>
* sys/directsound/Makefile.am:
* sys/directsound/gstdirectsounddevice.c:
* sys/directsound/gstdirectsounddevice.h:
* sys/directsound/gstdirectsoundplugin.c:
* sys/directsound/gstdirectsoundsink.c:
* sys/directsound/gstdirectsoundsink.h:
directsoundsink: Add support for a DeviceProvider
https://bugzilla.gnome.org/show_bug.cgi?id=792782
2018-01-23 18:37:09 +0000 Tim-Philipp Müller <tim@centricular.com>
* gst/multifile/gstmultifilesrc.c:
multifilesrc: fix up uri handler a little
Fix path escaping when creating URI from location in get_uri().
Return FALSE with an error when URI can't be parsed in set_uri().
https://bugzilla.gnome.org/show_bug.cgi?id=783581
2017-06-15 13:37:28 +0200 Dimitrios Katsaros <patcherwork@gmail.com>
* gst/multifile/gstmultifilesrc.c:
multifilesrc: implement uri handler
With this patch we can now provide a set of files
created by multifilesink as a source for uri elements.
e.g. gst-launch-1.0 playbin uri=multifile://img%25d.ppm
Note that for the %d pattern you need to replace % with %25.
This is to be compliant with URL naming standards.
https://bugzilla.gnome.org/show_bug.cgi?id=783581
2018-01-19 15:05:26 +0200 Vivia Nikolaidou <vivia@ahiru.eu>
* gst/isomp4/atoms.c:
* gst/isomp4/atoms.h:
* gst/isomp4/gstqtmux.c:
qtmux: Make sure timecode uses the same timescale as video
Don't blindly derive it from the frame rate, but try to get the per-pad
configured timescale first (if it exists)
https://bugzilla.gnome.org/show_bug.cgi?id=792680
2018-01-18 18:36:27 +0200 Sebastian Dröge <sebastian@centricular.com>
* gst/isomp4/gstqtmux.c:
qtmux: Allow configuring trak timescale per pad/trak
It generally makes not much sense to configure it for all pads/traks at
once as this value is usually different for each of them. As such, add a
new property on the pads in addition to the existing property on the
whole muxer.
https://bugzilla.gnome.org/show_bug.cgi?id=792649
2018-01-23 09:46:32 +0000 Tim-Philipp Müller <tim@centricular.com>
* gst/flv/gstflvmux.c:
Update for renamed aggregator pad API
https://bugzilla.gnome.org/show_bug.cgi?id=791204
2018-01-22 12:24:18 +0200 Sebastian Dröge <sebastian@centricular.com>
* gst/rtsp/gstrtspsrc.c:
rtspsrc: Fix up sendonly/recvonly attribute handling
We can't handle recvonly streams, sendonly streams are perfectly fine.
The direction is the one from the point of view of the SDP offerer
(i.e. the RTSP server), and a recvonly stream would be one where the
server expects us to send media.
RFC 3264, section 5.1:
If the offerer wishes to only send media on a stream to its peer, it
MUST mark the stream as sendonly with the "a=sendonly" attribute.
This is mixed up in the ONVIF streaming specification examples, but
actual implementations and conformance tools seem to not care at all
about the attributes.
https://bugzilla.gnome.org/show_bug.cgi?id=792376
2017-11-11 13:49:22 +0900 paul.kim <paul.hyunil@lge.com>
* ext/soup/gstsouphttpsrc.c:
souphttpsrc: Reset retry_count to 0 when GST_FLOW_FLUSHING
If a lot of seek method is called very quickly, sometimes data reading
and do_request occurs while seek flush event is occurring and error
occurs because retry_count
reaches to the max. Thus, reset retry_count if flush occurs after
do_request and read_buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=790199
2018-01-18 15:09:04 +0100 Jan Alexander Steffens (heftig) <jsteffens@make.tv>
* tests/check/elements/aacparse.c:
tests: aacparser: Test that short raw frames don't get concatenated
https://bugzilla.gnome.org/show_bug.cgi?id=792644
2018-01-18 14:23:07 +0100 Jan Alexander Steffens (heftig) <jsteffens@make.tv>
* gst/audioparsers/gstaacparse.c:
aacparse: When parsing raw input, accept frames of any size
Raw AAC streams might have very small frames, e.g. 6 byte frames
when encoding silence. These frames are then smaller than aacparse's
default min_frame_size of 10 bytes (ADTS_MAX_SIZE).
When passthrough is disabled or aacparse has to output ADTS, GstBaseParse
will concatenate these short frames to the following frame before
handling them to aacparse, which processes each input buffer as a single
frame, producing bad output.
To avoid this problem, set the min_frame_size to 1 when receiving a raw
stream.
https://bugzilla.gnome.org/show_bug.cgi?id=792644
2017-05-02 21:24:06 -0300 Adrián Pardini <github@tangopardo.com.ar>
* ext/shout2/gstshout2.c:
shout2send: print actual username in debug log out
https://bugzilla.gnome.org/show_bug.cgi?id=782093
2018-01-15 18:13:37 +0100 Mathieu Duponchelle <mathieu@centricular.com>
* gst/rtpmanager/gstrtpbin.c:
* tests/check/elements/rtpbin.c:
rtpbin: fix leak of elements requested by signals
When the signal returns a floating reference, as its return type
is transfer full, we need to sink it ourselves before passing
it to gst_bin_add (which is transfer floating).
This allows us to unref it in bin_remove_element later on, and
thus to also release the reference we now own if the signal
returns a non-floating reference as well.
As we now still hold a reference to the element when removing it,
we also need to lock its state and setting it to NULL before
unreffing it
Also update the request_aux_sender test.
https://bugzilla.gnome.org/show_bug.cgi?id=792543
2018-01-17 11:10:37 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* sys/v4l2/gstv4l2object.c:
v4l2: fix division by 0 for complex video formats
So complex video formats have 0 as pstride. Don't try to divide the
stride in such cases.
https://bugzilla.gnome.org/show_bug.cgi?id=792596
2018-01-17 11:08:25 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* sys/v4l2/gstv4l2object.c:
v4l2: display stride and width values if stride is too small
https://bugzilla.gnome.org/show_bug.cgi?id=792596
2018-01-16 13:19:29 +0000 Tim-Philipp Müller <tim@centricular.com>
* gst/multifile/gstmultifilesink.c:
multifilesink: document unit of "max-file-duration" property
2018-01-12 12:21:37 +0100 Florent Thiéry <florent.thiery@ubicast.eu>
* gst/udp/gstudpsrc.c:
udpsrc: fix typo in documentation
https://bugzilla.gnome.org/show_bug.cgi?id=792458
2018-01-12 09:53:37 +0100 Peter Seiderer <ps.report@gmx.net>
* sys/v4l2/gstv4l2videodec.c:
v4l2videodec: add property set/get PROP_CAPTURE_IO_MODE error handling
https://bugzilla.gnome.org/show_bug.cgi?id=791841
2018-01-12 09:46:30 +0100 Peter Seiderer <ps.report@gmx.net>
* sys/v4l2/gstv4l2videodec.c:
v4l2videodec: fold property set/get PROP_OUTPUT_IO_MODE case into default
https://bugzilla.gnome.org/show_bug.cgi?id=791841
2018-01-12 09:49:14 +0100 Peter Seiderer <ps.report@gmx.net>
* sys/v4l2/gstv4l2videoenc.c:
v4l2videoenc: add property set/get PROP_CAPTURE_IO_MODE error handling
https://bugzilla.gnome.org/show_bug.cgi?id=791841
2018-01-12 09:44:03 +0100 Peter Seiderer <ps.report@gmx.net>
* sys/v4l2/gstv4l2videoenc.c:
v4l2videoenc: fold property set/get PROP_OUTPUT_IO_MODE case into default
https://bugzilla.gnome.org/show_bug.cgi?id=791841
2018-01-11 10:44:18 +0100 Peter Seiderer <ps.report@gmx.net>
* sys/v4l2/gstv4l2videoenc.c:
v4l2videoenc: fix capture-io-mode property get
https://bugzilla.gnome.org/show_bug.cgi?id=791841
2018-01-11 17:47:39 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2src.c:
v4l2src: Maintain downstream caps order
The g_list_insert_sorted() will behave like prepend when the compare
function returns 0. In our case, we want to maintain the order hence
append. This fixes this issue and improve the sorting algorithm to make
a 10x10 prefered over 10x200 with a preference of 10x8 (and similar
cases which was badly handled). This fixes generally fixes issue were a
sub-optimal format / size is picked.
https://bugzilla.gnome.org/show_bug.cgi?id=792435
2017-12-21 23:02:30 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2videoenc.c:
v4l2videoenc: Also re-enabled paused task
When we only run _finish(), the task is never stopped externally,
instead it's only paused from the inside. We still want to restart
it in this case.
2018-01-08 15:23:24 +0100 Mathieu Duponchelle <mathieu@centricular.com>
* ext/flac/gstflacdec.c:
* ext/flac/gstflacdec.h:
flacdec: flush flac decoder on lost sync.
This to allow the decoder to start searching for a new
frame again.
https://bugzilla.gnome.org/show_bug.cgi?id=791473
2017-12-21 22:56:51 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2videoenc.c:
v4l2videoenc: Call stop on object before renegotiation
Otherwise renegotiation fails as we are still streaming.
https://bugzilla.gnome.org/show_bug.cgi?id=791338
2017-12-21 22:55:49 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2videoenc.c:
v4l2videoenc: Remove dead code
gst_v4l2_object_stop() will free and nullify the pool, so the
following if will never be true.
https://bugzilla.gnome.org/show_bug.cgi?id=791338
2017-12-21 22:29:06 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2videoenc.c:
v4l2videoenc: Delay capture pool activation
This is support CODA driver which prevents setting the output format if
the capture is streaming.
https://bugzilla.gnome.org/show_bug.cgi?id=791338
2017-12-13 20:23:46 +0000 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2object.c:
* sys/v4l2/gstv4l2videodec.c:
v4l2videodec: Add dynamic resolution change support
This implements a "big hammer" reallocation method. We effectively
drain and stop both side of the decoder and restart. This though is
the most generic method. This change should enable on most drivers
adaptive streaming.
https://bugzilla.gnome.org/show_bug.cgi?id=752962
2017-12-30 01:52:13 +0000 Tim-Philipp Müller <tim@centricular.com>
* meson.build:
meson: zlib is not actually a hard requirement
2017-09-28 18:00:38 -0300 Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
* ext/jpeg/gstjpegdec.c:
jpeg: Fixup frames without an EOI marker
Some cameras fail to send an end-of-image marker (EOI)
and can't be properly decoded by either JPEG or libjpeg.
This commit parses the frame, making sure it has an EOI.
If there isn't one, the EOI gets added to the buffer.
A similar fixup is done in the rtpjpegdepay element,
and it makes sense to do it in jpegdec as well.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
https://bugzilla.gnome.org/show_bug.cgi?id=791988
2017-12-26 13:50:24 +0100 Tim-Philipp Müller <tim@centricular.com>
* meson.build:
meson: skip translations if gettext is not available
2017-12-24 13:14:06 +0100 Tim-Philipp Müller <tim@centricular.com>
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.hierarchy:
* docs/plugins/inspect/plugin-rtp.xml:
docs: add rtpL8pay/depay to docs
2017-12-24 13:11:00 +0100 Tim-Philipp Müller <tim@centricular.com>
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/gst-plugins-good-plugins.hierarchy:
* docs/plugins/gst-plugins-good-plugins.signals:
* docs/plugins/inspect/plugin-gdkpixbuf.xml:
* docs/plugins/inspect/plugin-isomp4.xml:
* docs/plugins/inspect/plugin-matroska.xml:
* docs/plugins/inspect/plugin-rtp.xml:
docs: update for recent changes
2015-05-15 17:00:26 +0100 Tim Allen <tim.allen@ge.com>
* gst/rtp/Makefile.am:
* gst/rtp/gstrtp.c:
* gst/rtp/gstrtpL8depay.c:
* gst/rtp/gstrtpL8depay.h:
* gst/rtp/gstrtpL8pay.c:
* gst/rtp/gstrtpL8pay.h:
* gst/rtp/meson.build:
rtp: add L8 audio support
2017-12-23 12:45:17 +0100 Mark Nauwelaerts <mnauw@users.sourceforge.net>
* gst/udp/gstudpsrc.c:
udpsrc: fix typo in multicast join error message
2017-12-23 12:44:31 +0100 Mark Nauwelaerts <mnauw@users.sourceforge.net>
* gst/rtsp/gstrtspsrc.c:
rtspsrc: also proxy multicast-iface property to RTCP udpsrc
2015-11-02 00:41:28 +0100 Sebastian Rasmussen <sebrn@hotmail.com>
* gst/udp/gstmultiudpsink.c:
multiudpsink: don't try to set IPV6_TCLASS on IPV4 sockets
Avoids ERROR log message.
https://bugzilla.gnome.org/show_bug.cgi?id=757449
2015-11-02 00:41:28 +0100 Sebastian Rasmussen <sebrn@hotmail.com>
* tests/check/Makefile.am:
* tests/check/elements/udpsink.c:
tests: udpsink: add check that sets QoS on IPv4/6 sockets
https://bugzilla.gnome.org/show_bug.cgi?id=757449
2017-12-22 10:21:28 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2deviceprovider.c:
v4l2deviceprovider: Don't do slow probes
This is problematic in the current design at it seriously slow down
startup of applications. As of now, no known application uses the
colorimetry and the interlace-modes for anything (the two fields that
won't be probed). So let's disable it, in the long term we'll try and
find a way to interact with the provider so applicaiton could opt-in
these slow probing methods for more advance configuration.
2017-12-22 10:15:48 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2object.c:
v4l2object: Don't redefine mmap64
On Linux, there exist a case where mmap64 is already a define to mmap,
so avoid the redefine warning here.
2017-12-19 17:37:58 +0800 Ting-Wei Lan <lantw@src.gnome.org>
* configure.ac:
* meson.build:
* sys/v4l2/gstv4l2object.c:
v4l2object: Don't use mmap64 if off_t is 64-bit
The difference between mmap and mmap64 is the type of 'offset' argument.
mmap64 always uses a 64-bit interger as offset, while mmap uses off_t,
whose size can vary on different operating systems or architectures.
However, not all operating systems support mmap64. Fortunately, although
FreeBSD only has mmap, its off_t is always 64-bit regardless of
architectures, so we can simply use mmap when sizeof(off_t) == 8.
https://bugzilla.gnome.org/show_bug.cgi?id=791779
2017-12-22 09:17:04 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2object.c:
Revert "v4l2object: Use mmap64 to match libv4l2 signature"
This reverts commit b61bba48488c0a627d90f04cc9917d8c4f3f0d9b.
2017-12-19 17:37:58 +0800 Ting-Wei Lan <lantw@src.gnome.org>
* configure.ac:
* meson.build:
* sys/v4l2/gstv4l2object.c:
v4l2object: Check for mmap64 before using it
mmap64 is not available on FreeBSD.
https://bugzilla.gnome.org/show_bug.cgi?id=791779
2017-12-20 15:23:26 -0500 Vincent Penquerc'h <vincent.penquerch@collabora.com>
* gst/flv/gstflvmux.c:
* gst/flv/gstflvmux.h:
flv: flvmux ported to the GstAggregator
This makes it possible to create a flv file from a live source and not stop
when there are packet drops.
https://bugzilla.gnome.org/show_bug.cgi?id=782920
2017-12-19 16:47:52 -0500 Olivier Crête <olivier.crete@collabora.com>
* gst/udp/gstmultiudpsink.c:
multiudpsink: Call gst_base_sink_wait_preroll on unlock
This means that packets will not be lost on fast pause/playing cycles.
Also refactor the code a little to simplify it.
https://bugzilla.gnome.org/show_bug.cgi?id=774945
2017-12-19 16:22:52 -0500 Olivier Crête <olivier.crete@collabora.com>
* tests/examples/gtk/Makefile.am:
gtk example: Fix cflags in Makefile.am
2017-12-19 15:46:52 -0500 Olivier Crête <olivier.crete@collabora.com>
* gst/udp/gstmultiudpsink.c:
multiudpsink: Remove unused variable
2017-12-19 13:03:28 +0000 Tim-Philipp Müller <tim@centricular.com>
* ext/gtk/gtkgstglwidget.c:
gtk: don't include uninstalled header
2017-12-17 20:54:06 +0000 Tim-Philipp Müller <tim@centricular.com>
* ext/qt/Makefile.am:
gl: update plugins to use GstGL from -base
2017-12-17 20:54:06 +0000 Tim-Philipp Müller <tim@centricular.com>
* ext/gtk/Makefile.am:
* ext/gtk/meson.build:
* tests/examples/gtk/Makefile.am:
gl: update plugins to use GstGL from -base
2017-12-19 11:57:52 +0100 Edward Hervey <edward@centricular.com>
* gst/rtsp/gstrtspsrc.c:
rtspsrc: Fix two leaks
* gst_event_new_stream_start() does not take ownership of the stream_id
* the pipeline_request_id string that is created was not being freed
2017-12-07 22:08:42 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* gst/videocrop/gstvideocrop.c:
videocrop: Add GstVideoCropMeta support
If downstream supports this meta, it will add or update it from
the GstBuffer in-place rather then copying.
https://bugzilla.gnome.org/show_bug.cgi?id=791453
2017-12-13 09:22:17 +0000 Sean DuBois <sean@siobud.com>
* gst/matroska/matroska-demux.c:
* gst/matroska/matroska-ids.h:
* gst/matroska/matroska-mux.c:
* gst/matroska/webm-mux.c:
Add AV1 to matroska plugin
https://bugzilla.gnome.org/show_bug.cgi?id=784160
2017-12-15 14:48:09 +0100 fengalin <fengalin@free.fr>
* gst/matroska/matroska-mux.c:
* gst/matroska/matroska-read-common.c:
* tests/check/elements/matroskademux.c:
* tests/check/elements/matroskamux.c:
matroska: fix memory leaks due to toc related updates
https://bugzilla.gnome.org/show_bug.cgi?id=790686
2017-12-15 11:40:13 +0200 Sebastian Dröge <sebastian@centricular.com>
* tests/check/elements/matroskamux.c:
matroskamux: Fix various memory leaks in the unit test
https://bugzilla.gnome.org/show_bug.cgi?id=790686
2017-12-14 19:05:36 +0100 fengalin <fengalin@free.fr>
* tests/check/elements/matroskademux.c:
* tests/check/elements/matroskamux.c:
matroska-mux: migrate test to gst_harness
... following the guide lines from Håvard Graff (see https://gstconf.ubicast.tv/videos/moar-better-tests/).
https://bugzilla.gnome.org/show_bug.cgi?id=790686
2017-12-01 18:17:06 +0100 fengalin <fengalin@free.fr>
* gst/matroska/matroska-ids.h:
* gst/matroska/matroska-mux.c:
* gst/matroska/matroska-mux.h:
* gst/matroska/matroska-read-common.c:
* gst/matroska/matroska-read-common.h:
* tests/check/elements/matroskademux.c:
* tests/check/elements/matroskamux.c:
matroska: re-activate and update TOC support
TOC support in mastroskamux has been deactivated for a couple of years. This commit updates it to recent GstToc evolutions and introduces toc unit tests for both matroska-mux and matroska-demux.
There are two UIDs for Chapters in Matroska's specifications:
- The ChapterUID is a mandatory unsigned integer which internally refers to a given chapter. Except for title & language which use dedicated fields, this UID can also be used to add tags to the Chapter. The tags come in a separate section of the container.
- The ChapterStringUID is an optional UTF-8 string which also uniquely refers to a chapter but from an external perspective. It can act as a "WebVTT cue identifier" which "can be used to reference a specific cue, for example from script or CSS".
During muxing, the ChapterUID is generated and checked for unicity, while the ChapterStringUID receives the user defined UID. In order to be able to refer to chapters from the tags section, we maintain an internal Toc tree with the generated ChapterUID.
When demuxing, the ChapterStringUIDs (if available) are assigned to the GstTocEntries UIDs and an internal toc mimicking the toc is used to keep track of the ChapterUIDs and match the tags with the appropriate GstTocEntries.
https://bugzilla.gnome.org/show_bug.cgi?id=790686
2017-12-14 18:28:00 +0200 Sebastian Dröge <sebastian@centricular.com>
* tests/examples/v4l2/v4l2src-renegotiate.c:
v4l2src: Fix compiler error in example caused by re-declaring `index`
../tests/examples/v4l2/v4l2src-renegotiate.c:57:13: error: ‘index’ redeclared as different kind of symbol
static gint index = 0;
^
2017-12-14 14:49:01 +1100 Matthew Waters <matthew@centricular.com>
* common:
Automatic update of common submodule
From e8c7a71 to 3fa2c9e
2017-12-13 14:39:47 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2deviceprovider.c:
* sys/v4l2/gstv4l2object.c:
* sys/v4l2/gstv4l2object.h:
* sys/v4l2/gstv4l2radio.c:
* sys/v4l2/gstv4l2sink.c:
* sys/v4l2/gstv4l2src.c:
* sys/v4l2/gstv4l2transform.c:
* sys/v4l2/gstv4l2videodec.c:
* sys/v4l2/gstv4l2videoenc.c:
* sys/v4l2/v4l2_calls.c:
v4l2object: Use a debug object for tracing
This way we can pass the pad name instead of the element for tracing
which helps identifying which v4l2object is used withing M2M element
like decoder, encoder and transform. For the reference, pads are name
<parent-name>:<pad-name>.
2017-12-13 12:06:21 +0100 Edward Hervey <edward@centricular.com>
* gst/isomp4/qtdemux.c:
qtdemux: Push a GAP event if there's a second *or more*
And not "more than a second"
2017-12-13 11:35:37 +0100 Edward Hervey <edward@centricular.com>
* gst/isomp4/qtdemux.c:
qtdemux: Don't push GAP event if first buffer is within 1s
If we saw empty segments, we previously unconditionally pushed a
GAP event downstream regardless of the duration of that empty
segment.
In order to avoid issues with initial negotiation of downstream elements
(which would negotiate to something before receiving any data due to
that initial GAP event), check if there's at least a second of difference
(like we do for other GAP-related checks in qtdemux) before
deciding to push a GAP event downstream.
2017-12-13 10:21:17 +0100 Edward Hervey <edward@centricular.com>
* gst/isomp4/qtdemux.c:
qtdemux: Don't set pared=True on underspecified audio/mpeg
This *really* needs to go through a parser to figure out what the
exact content type is.
2017-12-11 15:27:08 -0600 Michael Catanzaro <mcatanzaro@igalia.com>
* gst/equalizer/gstiirequalizer.c:
equalizer: Fix -Wincompatible-pointer-types warning
This is caused by the new type propagation for g_object_ref.
https://bugzilla.gnome.org/show_bug.cgi?id=791494
2017-12-09 16:15:24 +0000 Tim-Philipp Müller <tim@centricular.com>
* tests/check/elements/.gitignore:
tests: ignore rtph264 test binary
2017-08-25 15:19:37 +0300 George Kiagiadakis <george.kiagiadakis@collabora.com>
* tests/check/elements/udpsrc.c:
tests: udpsrc: verify the correct amount of bytes is sent to the socket
https://bugzilla.gnome.org/show_bug.cgi?id=786799
2017-08-25 14:59:06 +0300 George Kiagiadakis <george.kiagiadakis@collabora.com>
* tests/check/elements/udpsrc.c:
tests: udpsrc: ensure test won't timeout if the buffers are already received
Sometimes all the buffers are received before the time we lock the
check_mutex, in which case g_cond_wait will wait forever for another
one. Just check if this is the case before waiting.
https://bugzilla.gnome.org/attachment.cgi?id=358397
2017-08-25 14:45:52 +0300 George Kiagiadakis <george.kiagiadakis@collabora.com>
* tests/check/elements/udpsrc.c:
tests: udpsrc: fix test_udpsrc to actually run and fix locking
Previously this would silently be skipped because 1600 != 1400
and there is no assertion on this call.
Also unlock check_mutex after use.
https://bugzilla.gnome.org/show_bug.cgi?id=786799
2017-09-21 18:23:54 +0300 John Nikolaides <jnikolaides@toolsonair.com>
* gst/multifile/gstsplitmuxsink.c:
* gst/multifile/gstsplitmuxsink.h:
splitmuxsink: added a "split now" action signal
Now, the video file can be split at an arbitrary time chosen by the user.
https://bugzilla.gnome.org/show_bug.cgi?id=787922
2017-12-08 00:31:32 +0000 Alvaro Margulis <alvaro.margulis@cirpack.com>
* gst/udp/gstmultiudpsink.c:
multiudpsink: fix bind address leak
https://bugzilla.gnome.org/show_bug.cgi?id=790986
2017-12-07 11:15:19 +0000 Tim-Philipp Müller <tim@centricular.com>
* gst/audioparsers/gstflacparse.c:
* gst/audioparsers/gstflacparse.h:
Revert "flacparse: fix header rewriting being ignored"
This caused broken metadata and also looks a bit dodgy.
Revert until we can figure out a solution that works for
all cases and doesn't break anything.
This reverts commit adeee44b07a173b9ab4253216caba8f66dd43abb.
https://bugzilla.gnome.org/show_bug.cgi?id=727802
https://bugzilla.gnome.org/show_bug.cgi?id=785558
2017-12-05 15:14:04 +0100 Philipp Zabel <p.zabel@pengutronix.de>
* sys/v4l2/gstv4l2videodec.c:
v4l2videodec: Handle drivers that only round up height
Commit 1f31715c9861 ("v4l2videodec: use visible size, not coded size,
for downstream negotiation filter") added support for removing the
padding obtained as the difference between width/height from G_FMT and
visible width/height from G_SELECTION from the probed caps obtained
via TRY_FMT.
This patch fixes the padding removal for drivers that only round up
height, but not width, to the padded frame size. This might happen
because horizontal padding can be handled by line stride (bytesperline),
but there is no such thing as plane stride in the V4L2 API for
single-buffer planar formats.
https://bugzilla.gnome.org/show_bug.cgi?id=791271
2017-11-01 08:21:37 -0600 Matt Staples <staples255@gmail.com>
* gst/rtsp/gstrtspsrc.c:
rtspsrc: Add a signal to allow outgoing messages to be modified or dropped
This feature allows applications to implement extensions to the RTSP
protocol, such as those defined in the ONVIF Streaming Specification.
https://bugzilla.gnome.org/show_bug.cgi?id=762884
2017-08-25 11:57:26 +0200 Haakon Sporsheim <haakon@pexip.com>
* gst/rtpmanager/rtpsession.c:
* tests/check/elements/rtpsession.c:
rtpsession: Handle zero length feedback packets
https://bugzilla.gnome.org/show_bug.cgi?id=791074
2017-07-10 15:19:34 +0200 Florian Zwoch <fzwoch@gmail.com>
* gst/isomp4/qtdemux.c:
qtdemux: fix debug log for 'hvcC' codec_data
https://bugzilla.gnome.org/show_bug.cgi?id=784749
2017-12-01 13:04:41 +0100 Havard Graff <havard.graff@gmail.com>
* tests/check/elements/rtpsession.c:
tests: rtpsession: refactor tests to use GstHarness
This patch simplifies the tests (44% less code) and
makes them much more readable.
The provided SessionHarness also makes it much easier
to write new tests for rtpsession.
https://bugzilla.gnome.org/show_bug.cgi?id=791070
2017-11-24 10:36:01 +0200 Sebastian Dröge <sebastian@centricular.com>
* gst/audioparsers/gstflacparse.c:
flacparse: Request at least the full header size when parsing headers
Otherwise baseparse will incrementally send us bigger buffers until the
full header size is reached, which is not only pointless but also means
that baseparse will reallocate and copy into a bigger buffer for every
input buffers. In pull mode that's done in 64kb increments, in push mode
usually in much smaller increments, causing a lot of overhead for
example when parsing high-quality coverart.
2017-11-29 11:29:31 +0100 Florent Thiéry <florent.thiery@ubicast.eu>
* sys/v4l2/gstv4l2object.c:
v4l2object: Fix dmabuf support detection
This resulted in improper selection of dmabuf on unsupported drivers.
The checked ioctl errno was not correct.
https://bugzilla.gnome.org/show_bug.cgi?id=790940
2017-11-27 20:10:51 +1100 Matthew Waters <matthew@centricular.com>
* common:
Automatic update of common submodule
From 3f4aa96 to e8c7a71
2017-11-27 14:44:58 +1100 Matthew Waters <matthew@centricular.com>
* ext/qt/gstqtglutility.cc:
gl/caopengllayer: use public GstGLContext instead of Cocoa-specific one
Allows keeping the GstGLCAOpenGLLayer public but not the winsys-specific
context/display/window.
2017-11-26 15:13:15 +0000 Tim-Philipp Müller <tim@centricular.com>
* configure.ac:
autotools: stop controlling symbol visibility with -export-symbols-regex
Instead, use -fvisibility=hidden and explicit exports via GST_EXPORT.
This should result in consistent behaviour for the autotools and
Meson builds.
2017-11-24 15:37:44 +0100 Edward Hervey <edward@centricular.com>
* gst/rtsp/gstrtspsrc.c:
* gst/rtsp/gstrtspsrc.h:
rtspsrc: Do more checks for seekability
When receiving a seek event, check whether we can actually seek based
on the information the server provided.
Also add more documentation on what the seekable field means
2017-11-25 00:53:42 +1100 Jan Schmidt <jan@centricular.com>
* gst/isomp4/gstqtmux.c:
qtmux: Always update reserved-duration-remaining
If a reserved-max-duration is set, we should always track
and update the reserved-duration-remaining estimate, even
if we're not sending periodic moov updates downstream for
full robust muxing.
2015-04-07 23:53:19 +1000 Jan Schmidt <jan@centricular.com>
* gst/multifile/gstsplitmuxsink.c:
* gst/multifile/gstsplitmuxsink.h:
* tests/check/elements/splitmux.c:
splitmuxsink: Use muxer reserved space properties if present.
If the use-robust-muxing property is set, check if the
assigned muxer has reserved-max-duration and
reserved-duration-remaining properties, and if so set
the configured maximum duration to the reserved-max-duration
property, and monitor the remaining space to start
a new file if the reserved header space is about to run out -
even though it never ought to.
2017-11-24 08:00:21 +0100 Edward Hervey <edward@centricular.com>
* ext/gtk/gtkgstglwidget.c:
gtk: Fix possibility of NULL variable
It's quite unlikely since it's initialized in instance initialization.
CID #1417721
2017-11-24 16:56:03 +1100 Jan Schmidt <jan@centricular.com>
* gst/multifile/gstsplitmuxsink.c:
* tests/check/elements/splitmux.c:
splitmux: Fix file switch-on-caps-change.
Switching to a new fragment because the input caps have
changed didn't properly end the previous file. Use the normal
EOS sequence to ensure that happens. Add a test that it works.
2017-11-24 16:53:40 +1100 Jan Schmidt <jan@centricular.com>
* ext/jpeg/gstjpegenc.c:
* ext/jpeg/gstjpegenc.h:
jpegenc: Update output caps on input caps change
If the input changes width/height that should be reflected
in the output caps, so make sure they get updated
2017-11-23 22:58:40 +1100 Jan Schmidt <jan@centricular.com>
* ext/qt/gstqtglutility.cc:
Revert "gl: Use GstGLDisplayEGL directly instead of creating a GstGLDisplayVIVFb subclass"
This reverts commit 47fd4d391e775c11f529705bb0f457a9d25ba5e7.
This patch is incorrect. It doesn't actually compile, and causes a crash
because the viv-fb window implementation needs a native EGL handle
to pass to fbCreateWindow, but the GstGLDisplayEGL handleis actually
an EGLDisplay now (and gets cast to the wrong type)
2017-09-05 15:55:03 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/gstrtph265depay.c:
rtph265depay: don't insert SPS/PPS inline for hvc1 output
Only for byte-stream or hev1. For hvc1 the SPS/PPS are in the
caps as codec_data field and in this case they shouldn't be in
the stream data as well. The output caps should be updated with
the new codec_data if needed, for hvc1.
2017-09-05 15:47:42 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/gstrtph265depay.c:
* gst/rtp/gstrtph265depay.h:
rtph265depay: store negotiated output format as enum
We keep the boolean byte_stream around since it's nicer for
readability and most of the code just cares about byte_stream
or not. This is useful for future-proofing the code for when
we add support for hev1 output as well.
2017-08-29 17:05:51 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/gstrtph265depay.c:
rtph265depay: add support for hvc1 as output format
2017-08-08 18:58:11 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/gstrtph265pay.c:
rtph265pay: don't add trailing zeros to VPS/PPS/SPS
This would happen if input is byte-stream with four-byte
sync markers instead of three-byte ones. The code that
scans for sync markers will place the start of the NALU
on the third-last byte of the NALU sync marker, which
means that any additional zeros may be counted as belonging
to the previous NALU instead of being part of the next sync
marker. Fix that so we don't send VPS/SPS/PPS with trailing
zeros in this case.
See https://bugzilla.gnome.org/show_bug.cgi?id=732758
2017-06-16 12:41:49 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/gstrtph265depay.c:
rtph265depay: assemble AUs into downstream-allocated memory
When merging NALs into AUs, use downstream-provided allocator
to allocate memory and copy NALs directly into that memory when
assembling them.
2017-06-16 12:30:13 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/gstrtph265depay.c:
* gst/rtp/gstrtph265depay.h:
rtph265depay: try to negotiate an allocator with downstream
2017-06-16 12:13:32 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/gstrtph265depay.c:
rtph265depay: simplify buffer accumulation control flow
There is no difference between pushing out a buffer directly
with gst_rtp_base_depayload_push() and returning it from the
process function. The base class will just call _depayload_push()
on the returned buffer as well.
So instead of marshalling buffers through three layers and back,
just push them from one place in handle_nal() and always return
NULL from the process vfunc. This simplifies the code a little.
Also rename _push_fragmentation_unit() to _finish_fragmentation_unit()
for clarity. Push sounds like it means being pushed out, whereas
it might just be pushed into an adapter.
This change has the side-effect that multiple NALs in a single STAP
(such as SPS/PPS) may no longer be pushed out as a single buffer if
we output NALs in byte-stream format (i.e. not aggregate AUs), but
that shouldn't really make any difference to anyone.
2017-06-16 11:18:16 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/gstrtph265depay.c:
rtph265depay: fix crash with empty sprops-parameters
https://bugzilla.gnome.org/show_bug.cgi?id=780040
2017-06-16 12:20:34 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/gstrtph265depay.c:
rtph265depay: minor clean-up
Declutter caps update code a bit.
2017-08-08 13:10:15 +0100 Tim-Philipp Müller <tim@centricular.com>
* tests/check/elements/rtp-payloading.c:
tests: rtp-payloading: add unit test for rtph264pay codec_data
Make sure no trailing zero bytes sneak into our SPS or PPS.
https://bugzilla.gnome.org/show_bug.cgi?id=732758
2014-07-05 06:21:48 +0000 Philip Craig <phil@blackmoth.com.au>
* gst/rtp/gstrtph264pay.c:
rtph264pay: don't add trailing zeros to PPS/SPS
This would happen if input is byte-stream with four-byte
sync markers instead of three-byte ones. The code that
scans for sync markers will place the start of the NALU
on the third-last byte of the NALU sync marker, which
means that any additional zeros may be counted as belonging
to the previous NALU instead of being part of the next sync
marker. Fix that so we don't send SPS/PPS with trailing
zeros in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=732758
2017-05-20 15:50:22 +0100 Tim-Philipp Müller <tim@centricular.com>
* tests/check/Makefile.am:
* tests/check/elements/rtph264.c:
* tests/files/Makefile.am:
* tests/files/h264.rtp:
tests: rtph264depay: add test for using downstream memory allocator
2017-06-03 00:58:05 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/gstrtph264depay.c:
rtph264depay: assemble AUs into downstream-allocated memory
When merging NALs into AUs, use downstream-provided allocator
to allocate memory and copy NALs directly into that memory when
assembling them.
2017-06-02 21:27:40 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/gstrtph264depay.c:
* gst/rtp/gstrtph264depay.h:
rtph264depay: try to negotiate an allocator with downstream
2017-06-02 20:54:20 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/gstrtph264depay.c:
rtph264depay: minor clean-up
Declutter caps update code a bit.
2017-11-23 08:00:58 +0100 Edward Hervey <edward@centricular.com>
* gst/isomp4/qtdemux.c:
qtdemux: Run gst-indent
2017-11-23 07:59:07 +0100 Edward Hervey <edward@centricular.com>
* gst/replaygain/rganalysis.c:
rganalysis: Fix left shift of signed values
left shifting signed values is undefined.
Instead of doing "x << offs" which is undefined, do the equivalent
"x * (1 << offs)" which is well defined
2017-11-23 07:57:44 +0100 Edward Hervey <edward@centricular.com>
* gst/isomp4/qtdemux.c:
qtdemux: Check presence of bitrate tags
Check whether the tag was present before printing it out
CID #1418501
2017-11-21 09:33:49 +0100 Edward Hervey <edward@centricular.com>
* gst/rtsp/gstrtspsrc.c:
rtspsrc: Use the proper maximum value for seekable
it's a gfloat, not a gdouble
2017-11-18 02:27:50 +1100 Jan Schmidt <jan@centricular.com>
* gst/isomp4/qtdemux.c:
qtdemux: Use new GST_SEQNUM_INVALID constant
2017-11-18 02:01:58 +1100 Jan Schmidt <jan@centricular.com>
* gst/multifile/gstsplitmuxpartreader.c:
splitmuxsrc: Don't return FALSE from event handling.
Returning FALSE because we drop an event means that
internal sources like qtdemux might throw an error
and break the whole pipeline. The only time it can
happen is either flushing or shutdown, and those
will be handled anyway.
2017-10-22 18:26:12 +0800 Jun Xie <jun.xie@samsung.com>
* gst/isomp4/qtdemux.c:
qtdemux: reset reused QtDemuxStream while parsing a new 'trak'
if QtDemuxStream is reused, then we need to reset it.
https://bugzilla.gnome.org/show_bug.cgi?id=788759
2017-11-13 10:43:11 +0900 Seungha Yang <pudding8757@gmail.com>
* gst/isomp4/fourcc.h:
* gst/isomp4/gstqtmux.c:
* gst/isomp4/qtdemux.c:
isomp4: Add official fourcc for VP8 codec
fourcc for VP8 codec is "vp08" defined by spec. To follow it,
add it to demux and change legacy VP8 fourcc "VP80" to "vp08" in mux.
Also, enable sync table in case of VP8 codec.
See also https://www.webmproject.org/vp9/mp4/
https://bugzilla.gnome.org/show_bug.cgi?id=790026
2017-11-13 10:38:06 +0900 Seungha Yang <pudding8757@gmail.com>
* gst/isomp4/fourcc.h:
* gst/isomp4/gstqtmux.c:
* gst/isomp4/gstqtmuxmap.c:
* gst/isomp4/qtdemux.c:
isomp4: Add support VP9 codec
Add fourcc for VP9 codec and support it by qtdemux and qtmux
See also https://www.webmproject.org/vp9/mp4/
https://bugzilla.gnome.org/show_bug.cgi?id=790026
2017-11-13 13:51:20 +0100 Edward Hervey <edward@centricular.com>
* gst/matroska/matroska-demux.c:
matroskademux: Remove bogus error message
It's just informational
2017-11-10 15:51:05 +0100 Edward Hervey <edward@centricular.com>
* gst/rtp/gstrtpmpvpay.c:
rtpmpvpay: Don't create empty buffer list
If there's nothing to send, just return
2017-03-13 18:14:12 +0900 paul.kim <paul.hyunil@lge.com>
* ext/soup/gstsouphttpsrc.c:
souphttpsrc: Remove range header when seek to 0
This fixes the previous range header is remained if seek to 0 is
attempted.
https://bugzilla.gnome.org/show_bug.cgi?id=779957
2017-11-08 16:34:01 +0100 Edward Hervey <edward@centricular.com>
* ext/soup/gstsouphttpsrc.c:
souphttpsrc: Fix seeking back to 0
This is a regression introduced by "03db374 - souphttpsrc: retry
request on early termination from the server"
The problem was that when seeking back to 0, we would not end up calling
add_range_header() which in addition to adding range headers *ALSO* sets
the read_position to the requested one.
This would result in a wide variety of later failures, like reading
again and again instead of stopping properly.
2017-11-07 18:03:53 +0900 Seungha Yang <pudding8757@gmail.com>
* gst/matroska/matroska-demux.c:
* gst/matroska/matroska-ids.c:
* gst/matroska/matroska-ids.h:
matroskademux: Add parsing Colour element
... and forward colorimetry to downstream. The Colour element describes
various color information (similar to 'colr' box in isobmff).
Note that, due to the comparatively limited syntax for color information
in vpx codecs, the color information in mkv/wemb container level
should be used for sophisticated color handling (e.g., HDR video).
https://bugzilla.gnome.org/show_bug.cgi?id=790023
2017-10-19 14:02:37 +0200 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
* sys/v4l2/gstv4l2deviceprovider.c:
v4l2deviceprovider: Ignore touch sensing devices
With GST_V4L2_USE_LIBV4L2=1, my laptop's touchpad shows up as a video
source device in gst-device-monitor, but attempting to stream from it
fails because the device doesn't actually support any video formats.
name : Synaptics RMI4 Touch Sensor
class : Video/Source
caps : video/x-raw, format=(string)I420, framerate=(fraction)[ 0/1, 2147483647/1 ], width=(int)0, height=(int)0, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1;
video/x-raw, format=(string)YV12, framerate=(fraction)[ 0/1, 2147483647/1 ], width=(int)0, height=(int)0, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1;
video/x-raw, format=(string)BGR, framerate=(fraction)[ 0/1, 2147483647/1 ], width=(int)0, height=(int)0, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1;
video/x-raw, format=(string)RGB, framerate=(fraction)[ 0/1, 2147483647/1 ], width=(int)0, height=(int)0, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1;
properties:
udev-probed = true
device.bus_path = /sys/devices/rmi4-00/rmi4-00.fn54/video4linux/v4l-touch0
sysfs.path = /sys/devices/rmi4-00/rmi4-00.fn54/video4linux/v4l-touch0
device.subsystem = video4linux
device.product.name = "Synaptics\ RMI4\ Touch\ Sensor"
device.capabilities = :capture:
device.api = v4l2
device.path = /dev/v4l-touch0
v4l2.device.driver = rmi4_f54
v4l2.device.card = "Synaptics\ RMI4\ Touch\ Sensor"
v4l2.device.bus_info = rmi4:rmi4-00.fn54
v4l2.device.version = 265480 (0x00040d08)
v4l2.device.capabilities = 2501902337 (0x95200001)
v4l2.device.device_caps = 354418689 (0x15200001)
gst-launch-1.0 v4l2src device=/dev/v4l-touch0 ! ...
v4l2-ctl -d /dev/v4l-touch0 --list-formats reports:
ioctl: VIDIOC_ENUM_FMT
Index : 0
Type : Video Capture
Pixel Format: 'TD16'
Name : 16-bit signed deltas
Index : 1
Type : Video Capture
Pixel Format: 'TD08'
Name : 8-bit signed deltas
Index : 2
Type : Video Capture
Pixel Format: 'TU16'
Name : 16-bit unsigned touch data
https://bugzilla.gnome.org/show_bug.cgi?id=789197
2017-11-03 13:27:50 -0400 Youness Alaoui <kakaroto@kakaroto.homelinux.net>
* gst/rtp/gstrtpg722pay.c:
rtpg722pay: Add encoding-params to the src caps template
The G722 payload only accepts G722 audio with channels=1, so it must
specify the encoding-params=1 in its src caps, otherwise it causes issues
with farstream which thinks it supports 2 channels G722 and when
confronted with a remote that has G722/8000/2, it will negotiate it
and error out with a not-negotiated when the caps don't intersect
at runtime.
https://bugzilla.gnome.org/show_bug.cgi?id=789878
2017-10-06 17:36:34 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2allocator.c:
* sys/v4l2/gstv4l2bufferpool.c:
v4l2allocator: Add support for data_offset
In MPLANE mode, the driver may set data_offset, which represent some
padding at the start of the buffer used internally. This portion of the
data need to be skipped, though it is included in bytesused.
This patch removes frame size sanity check as the method used will no
longer work. This check was simply there to help detect broken kernel
drivers. It would be re-implement by estimating the plane size, which is
not totally trivial and may be too much work for a simple debug check.
https://bugzilla.gnome.org/show_bug.cgi?id=733501
2017-07-17 17:09:18 +0300 Sebastian Dröge <sebastian@centricular.com>
* gst/rtsp/gstrtspsrc.c:
rtspsrc: Add "accept-certificate" signal for manually checking a TLS certificate for validity
https://bugzilla.gnome.org/show_bug.cgi?id=785024
2017-10-30 19:15:56 +0900 Sangkyu Park <sk1122.park@samsung.com>
* gst/rtsp/gstrtspsrc.c:
rtspsrc: Print RTSP/SDP messages to gstreamer log instead of stdout
- 'debug' property is deprecated
- All RTSP messages are printed to gstreamer log with 'log' level.
https://bugzilla.gnome.org/show_bug.cgi?id=788917
2017-11-01 15:29:58 +0900 Justin Kim <justin.kim@collabora.com>
* gst/rtpmanager/rtpsession.c:
rtpsesson: downgrade message level to debug when detected XR
When XR packet is detected, warning message leads to misunderstandings.
Until RFC3611 is implemented in gst-plugins-base, the level needs to
be downgraded to avoid confusion.
https://bugzilla.gnome.org/show_bug.cgi?id=789746
2017-10-24 20:12:29 +0530 Ashish Kumar <kr.ashish@samsung.com>
* gst/isomp4/atomsrecovery.c:
gst-plugins-good: atoms_recovery: Handled buffer mapping failure
https://bugzilla.gnome.org/show_bug.cgi?id=789413
2017-07-08 22:11:49 -0700 Thiago Santos <thiagossantos@gmail.com>
* gst/isomp4/atomsrecovery.c:
* gst/isomp4/atomsrecovery.h:
* gst/isomp4/gstqtmoovrecover.c:
atomsrecovery: read from mdat only what is on headers
It is possible that the mdat has more data than what was stored in the
headers file. If we put that to the output the file will have bogus data
at the end and some players will complain.
https://bugzilla.gnome.org/show_bug.cgi?id=784258
2017-07-05 22:23:21 -0700 Thiago Santos <thiagossantos@gmail.com>
* gst/isomp4/atomsrecovery.c:
isomp4: atomsrecovery: handle common and large atom headers
Do not assume all files are large files. Check and use the short or
extended atom size field only if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=784258
2017-10-20 11:08:24 +0200 Andreas Frisch <afrisch@make.tv>
* configure.ac:
pngdec: fix build with libpng versions between 1.2 and 1.5.1 (revised)
https://bugzilla.gnome.org/show_bug.cgi?id=765927
2017-10-19 18:23:34 +0200 Andreas Frisch <fraxinas@dreambox.guru>
* configure.ac:
* ext/libpng/gstpngdec.c:
pngdec: fix build with libpng versions between 1.2 and 1.5.1
https://bugzilla.gnome.org/show_bug.cgi?id=765927
2017-10-19 16:17:45 +0200 Andreas Frisch <fraxinas@dreambox.guru>
* ext/libpng/gstpngdec.c:
pngdec: Extract icc profiles and send them downstreams for colormanagement elements
https://bugzilla.gnome.org/show_bug.cgi?id=765927
2017-10-16 14:20:47 +0200 Thibault Saunier <thibault.saunier@osg.samsung.com>
* gst/rtsp/gstrtspsrc.c:
rtsp: Add missing Since marker
2017-10-13 12:25:22 +0100 Tim-Philipp Müller <tim@centricular.com>
* ext/qt/qtplugin.pro:
qt: update qmake .pro file
Update for renaming of plugin file, and add some
missing source files.
2017-06-13 18:51:32 +0200 Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>
* ext/gdk_pixbuf/gstgdkpixbufdec.c:
gstgdkpixbufdec: stop pretending to decode gifs.
If you can't decode an animated gif, you can't decode a gif,
so stop squatting GST_RANK_SECONDARY for that format, libav
does a better job.
https://bugzilla.gnome.org/show_bug.cgi?id=784683
2017-09-28 22:51:57 +0200 Philippe Renon <philippe_renon@yahoo.fr>
* sys/directsound/gstdirectsoundsink.c:
directsoundsink: simplify how DirecSoundBuffer is cleared
we always want to clear the whole buffer so no need to
start from offset even if the offset is always zero.
https://bugzilla.gnome.org/show_bug.cgi?id=788847
2017-09-28 22:49:31 +0200 Philippe Renon <philippe_renon@yahoo.fr>
* sys/directsound/gstdirectsoundsink.c:
directsoundsink: fix comment
https://bugzilla.gnome.org/show_bug.cgi?id=788847
2017-09-28 22:48:41 +0200 Philippe Renon <philippe_renon@yahoo.fr>
* sys/directsound/gstdirectsoundsink.c:
directsoundsink: don't call set_volume with private scaled volume
use get_volume() instead to get unscaled volume
https://bugzilla.gnome.org/show_bug.cgi?id=788847
2017-09-28 22:46:23 +0200 Philippe Renon <philippe_renon@yahoo.fr>
* sys/directsound/gstdirectsoundsink.c:
directsoundsink: remove duplicate volume initialization
https://bugzilla.gnome.org/show_bug.cgi?id=788847
2017-10-10 18:04:50 +0300 Sebastian Dröge <sebastian@centricular.com>
* gst/isomp4/qtdemux.c:
qtdemux: Fix compiler warning
qtdemux.c: In function ‘gst_qtdemux_configure_stream’:
qtdemux.c:7764:34: error: suggest parentheses around ‘&&’ within ‘||’ [-Werror=parentheses]
if ((stream->n_samples == 1) && (stream->first_duration == 0)
~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2017-09-22 18:41:52 +0200 Nael Ouedraogo <nael.ouedraogo@crf.canon.fr>
* gst/isomp4/qtdemux.c:
qtdemux: fix assert when moof containing one sample
Avoid computing frame rate when a stream contain moof with only one
sample, to avoid an assert. The moof is considered as still picture.
The same is already done for one sample given in the moov.
https://bugzilla.gnome.org/show_bug.cgi?id=782217
2017-10-09 14:17:25 +0200 Thibault Saunier <thibault.saunier@osg.samsung.com>
* gst/rtsp/gstrtspsrc.c:
rtspsrc: Avoid potentially dereferencing NULL pointer
CID 1418986
2017-10-08 00:07:43 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtpmanager/gstrtpjitterbuffer.c:
rtpjitterbuffer: fix debug message on pt mismatch
2017-10-07 21:11:41 +0000 Nicolas Dufresne <nicolas@ndufresne.ca>
* sys/v4l2/gstv4l2videoenc.c:
v4l2videoenc: Fix driver capability dectection
Use the right set of caps when checking if caps intersect. That makes
the check only select the supported devices.
2017-09-20 01:46:15 +0000 Nicolas Dufresne <nicolas@ndufresne.ca>
* sys/v4l2/gstv4l2videodec.c:
* sys/v4l2/gstv4l2videoenc.c:
v4l2videoenc/dec: Don't leak template caps
2017-10-07 21:17:53 +0000 Nicolas Dufresne <nicolas@ndufresne.ca>
* sys/v4l2/gstv4l2videoenc.c:
v4l2videodec: Protect against null pool in _stop
This may happen if the negotiation fails, as we will have never
created the pools.
2017-10-07 15:55:24 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtpmanager/gstrtpbin.c:
* gst/rtsp/gstrtspsrc.c:
rtpbin, rtspsrc: fix compiler warnings about 64-bit integer signednes
"warning: this decimal constant is unsigned only in ISO C90" with
gcc 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.3)
2017-10-07 15:39:18 +0100 Tim-Philipp Müller <tim@centricular.com>
* sys/v4l2/gstv4l2object.c:
v4l2: fix build without libv4l
https://bugzilla.gnome.org/show_bug.cgi?id=779466
2017-10-07 14:06:38 +0300 Sebastian Dröge <sebastian@centricular.com>
* gst/rtp/gstrtpsbcdepay.c:
rtpsbcdepay: Fix potential NULL pointer dereference
CID 1418864
2017-10-07 01:21:19 +0300 Sebastian Dröge <sebastian@centricular.com>
* gst/audiofx/audioecho.c:
audioecho: Micro-optimize
Gives 1.28x speedup in surround-delay=false mode
2017-10-06 23:59:43 +0300 Sebastian Dröge <sebastian@centricular.com>
* gst/audiofx/audioecho.c:
audioecho: Don't do linear interpolation between samples
Linear interpolation adds quite some noise, and it's unlikely that
anybody will ever need sub-sample accurate delays. Proper resampling
before that will lead to better results.
2017-09-29 22:19:42 -0400 Enrico Jorns <ejo@pengutronix.de>
* sys/v4l2/gstv4l2object.c:
v4l2object: auto-detect dmabuf export for V4L2_IO_AUTO on capture side
Issue an invalid VIDIOC_EXPBUF ioctl to the driver to check if the
driver supports dmabuf export. If the driver does not implement the
IOCTL, the error is ENOTTY. Any other error codes mean that the driver
implements VIDIOC_EXPBUF.
https://bugzilla.gnome.org/show_bug.cgi?id=779466
2017-09-24 14:35:01 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* gst/flv/gstflvdemux.c:
flvdemux: Only set pixel-aspect-ratio if specified
If it's not specified, we should let the decoder figure it out.
Apparently the code was already in place, all was to make the code
conditional.
https://bugzilla.gnome.org/show_bug.cgi?id=787795
2017-09-23 15:44:09 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* gst/flv/gstflvdemux.c:
flvdemux: Don't pull passed the EOS
When a truncated FLV is provided and processed in pull mode, we
may endup trying to pull passed EOS, causing a rather confusing
warning as the pull offset is an integer overflow.
https://bugzilla.gnome.org/show_bug.cgi?id=787795
2017-09-23 15:41:30 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* gst/flv/gstflvdemux.c:
flvdemux: Ignore invalid H.264 codec data
This code basically skip over codec_data with empty payload. In
this case, the codec_data variable is the size of the header for
the CODEC part of Video Tag. The remaining is supposed to be the
H.264 codec data, hence should not be empty.
https://bugzilla.gnome.org/show_bug.cgi?id=787795
2017-09-23 15:38:07 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* gst/flv/gstflvdemux.c:
flvdemux: Avoid integer overflow on invalid CTS
If the CTS is negative an would lead to a negtive PTS, clip
the CTS so the PTS will be 0.
https://bugzilla.gnome.org/show_bug.cgi?id=787795
2017-10-05 14:36:28 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/inspect/plugin-isomp4.xml:
docs: Update for git changes
2017-10-05 14:35:27 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
* gst/rtsp/gstrtspsrc.c:
rtspsrc: Fix build
2017-07-13 14:46:55 -0400 Thibault Saunier <thibault.saunier@osg.samsung.com>
* gst/rtsp/gstrtspsrc.c:
rtspsrc: Handle TCP as lower transport with RTSP 2.0
Meaning that the interleave fields have to be updated as
if streams setup was working when using pipelined setup
request. Otherwise there is a mismatch between the server
channel count and our own.
This also makes RTSP 2.0 over HTTP working.
https://bugzilla.gnome.org/show_bug.cgi?id=781446
2017-04-20 17:45:39 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
* gst/rtsp/gstrtspsrc.c:
* gst/rtsp/gstrtspsrc.h:
rtsp: Start implementing support for RTSP 2.0
- Handle version negotation:
Added a `default-version` property so that the user can configure
what to use in case the server does not support version negotation
(which actually exist)
- Handle pipelined requests, which allow avoiding full round trip to
setup the RTP streams (request are sent in a raw, and response are
handled as they arrive).
- Handle the new Media-Properties header
- Handle the new Seek-Style header
- Handle the new Accept-Ranges header
Handling of IPV6 should already be OK.
We are still missing (at least) the following features (which do not
seem really mandatory as they require a "persistent connection between
server and client"):
- Server to Client TEARDOWN command (Not so usefull fmpov)
- PLAY_NOTIFY (not needed for our server yet)
- Support for the new REDIRECT features
and probably some more protocol changes might not be handled yet.
https://bugzilla.gnome.org/show_bug.cgi?id=781446
2017-05-03 11:19:03 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
* gst/rtsp/gstrtspsrc.c:
rtspsrc: Use a macro to debug RTSP messages
Simplifying the code a little.
https://bugzilla.gnome.org/show_bug.cgi?id=781446
2017-10-03 16:30:10 -0700 Reynaldo H. Verdejo Pinochet <reynaldo@osg.samsung.com>
* ext/gdk_pixbuf/gstgdkpixbufsink.c:
* gst/level/gstlevel.c:
* gst/matroska/matroska-mux.c:
* gst/multifile/gstmultifilesink.c:
* gst/replaygain/gstrganalysis.c:
* gst/spectrum/gstspectrum.c:
Use proper GtkDoc notation for NULL/FALSE/TRUE
2017-10-02 12:35:48 -0700 Cassandra Rommel <cassandra.rommel@gmail.com>
* ext/qt/gstqtglutility.cc:
gl: Use GstGLDisplayEGL directly instead of creating a GstGLDisplayVIVFb subclass
This simplifies the code a lot without any functional changes apart from
not closing the display connection. Closing the display connection is
not safe to do as it is shared between all other code in the same
process and no reference counting or anything happens at the platform
layer.
2017-10-01 16:09:13 +0200 Sebastian Dröge <sebastian@centricular.com>
* gst/rtsp/gstrtspsrc.c:
rtspsrc: Ignore medias marked as sendonly
We're never going to receive anything from them, so don't create pads
for them. These medias are destinations where *we* could send something.
2017-09-05 11:41:35 +0300 Sebastian Dröge <sebastian@centricular.com>
* gst/rtp/gstrtpsbcdepay.c:
* gst/rtp/gstrtpsbcdepay.h:
sbcdepay: Add property to ignore input timestamps
This then just counts samples and calculates the output timestamps based
on that and the very first observed timestamp. The timestamps on the
buffers are continued to be used to detect discontinuities that are too
big and reset the counter at that point.
When receiving data via Bluetooth, many devices put completely wrong
values into the RTP timestamp field. For example iOS seems to put a
timestamp in milliseconds in there, instead of something based on the
current sample offset (RTP clock-rate == sample rate).
https://bugzilla.gnome.org/show_bug.cgi?id=787297
2017-09-21 13:59:00 +0530 Ponnam Srinivas <p.srinivas@samsung.com>
* gst/rtp/gstrtph265depay.c:
rtph265depay: Fix Memory leak in error case
https://bugzilla.gnome.org/show_bug.cgi?id=787937
2017-09-22 16:55:21 +0530 Deepak Srivastava <srivastava.d@samsung.com>
* gst/deinterlace/gstdeinterlace.c:
deinterlace: Fixed memory leak in error code path
https://bugzilla.gnome.org/show_bug.cgi?id=788041
2017-09-20 09:37:59 +0530 Ponnam Srinivas <p.srinivas@samsung.com>
* ext/libpng/gstpngenc.c:
pngenc: fix memory leak in error code path
Don't leak row_pointers if frame can't be mapped.
https://bugzilla.gnome.org/show_bug.cgi?id=787885
2017-09-19 17:55:58 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2videodec.c:
v4l2videodec: Don't leak codec name
2017-08-05 12:23:30 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2bufferpool.c:
* sys/v4l2/gstv4l2bufferpool.h:
* sys/v4l2/gstv4l2transform.c:
* sys/v4l2/gstv4l2videodec.c:
* sys/v4l2/gstv4l2videoenc.c:
v4l2bufferpool: Don't stop streaming when pool is flushing
The purpose of being able to flush the buffer pool is only to
unlock any blocked operation. Doing streamoff/streamon had the
side effect of turning off and on the camera. As we do a flush_start
/ flush_stop sequence when shutting down, that would cause a really
quick sequence of streamoff/streamon/streamoff/close which was
causing some cameras to stop working.
https://bugzilla.gnome.org/show_bug.cgi?id=783945
2017-09-17 16:18:48 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtpmanager/gstrtpjitterbuffer.c:
rtpjitterbuffer: implement basic chain_list function
Doesn't do anything fancy yet, but still avoids lots of
unnecessary locking/unlocking that would happen if the
default chain_list fallback function in GstPad got invoked.
2017-09-17 12:50:30 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/multifile/gstmultifilesink.c:
multifilesink: use new gst_buffer_list_calculate_size()
2017-09-14 13:00:56 +0200 Patrick Radizi <patrickr@axis.com>
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpbin.h:
* gst/rtsp/gstrtspsrc.c:
* gst/rtsp/gstrtspsrc.h:
rtpbin: add option for sanity checking timestamp offset
Timestamp offsets needs to be checked to detect unrealistic values
caused for example by NTP clocks not in sync. The new parameter
max-ts-offset lets the user decide an upper offset limit. There
are two different cases for checking the offset based on if
ntp-sync is used or not:
1) ntp-sync enabled
Only negative offsest are allowed since a positive offset would
mean that the sender and receiver clocks are not in sync.
Default vaule of max-ts-offset = 0 (disabled)
2) ntp-sync disabled
Both positive and negative offsets are allowed.
Default vaule of max-ts-offset = 3000000000
The reason for different default values is to be backwards
compatible.
https://bugzilla.gnome.org/show_bug.cgi?id=785733
2017-09-14 11:20:17 +0200 Patrick Radizi <patrickr@axis.com>
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpbin.h:
* gst/rtpmanager/gstrtpjitterbuffer.c:
* gst/rtpmanager/rtpsource.c:
* gst/rtsp/gstrtspsrc.c:
* gst/rtsp/gstrtspsrc.h:
rtpbin: add option for increasing ts_offset gradually
Instant large changes to ts_offset may cause timestamps to move
backwards and also cause visible effects in media playback. The new
option max-ts-offset-adjustment lets the application control the rate to
apply changes to ts_offset.
https://bugzilla.gnome.org/show_bug.cgi?id=784002
2017-09-06 07:59:56 +0000 Jochen Henneberg <jh@henneberg-systemdesign.com>
* ext/qt/qtitem.cc:
* ext/qt/qtitem.h:
qmlglsink: Expose itemInitialized as property
Instead of just signalling when ready exposing the state
as a property allows us to bind at any time if player is
loaded async.
2017-09-13 16:05:08 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2src.c:
v4l2src: Ensure all caps a fixated
The code relied on the list compare function to fixate the caps
but if the caps only has one structure, the compare function will
never get called. Capture device for which there is only one
structure in the caps would then get some assertion and later
fail badly.
Instead, fixate before inserting into the list and split the reading
and the fixation of the structures.
2017-09-13 11:52:09 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2object.c:
v4l2object: Don't leak the par value
2017-09-13 11:38:44 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* tests/examples/v4l2/v4l2src-renegotiate.c:
v4l2-renegotiate: Don't leak the option context
2017-09-13 11:33:33 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* tests/examples/v4l2/v4l2src-renegotiate.c:
v4l2src-renegotiate: Don't leak pipeline desc string
2017-09-13 11:32:09 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* tests/examples/v4l2/v4l2src-renegotiate.c:
v4l2-renegotiate: Change --enable-dmabuf into --io-mode=
This gives allow testing dmabuf importation but also exportation buy
letting user pick anything from the io-mode property on v4l2src.
2017-09-11 20:24:27 +0200 Mark Nauwelaerts <mnauw@users.sourceforge.net>
* gst/matroska/matroska-demux.c:
matroskademux: search_cluster should find preceding cluster before target
... since failing this constraint takes search_pos by surprise which might
then end up in an infinite loop.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=787538
2017-09-07 14:33:57 +0300 George Kiagiadakis <george.kiagiadakis@collabora.com>
* gst/rtpmanager/gstrtprtxreceive.c:
* gst/rtpmanager/gstrtprtxsend.c:
rtprtx{send,receive}: improve the debug messages
* use INFO/DEBUG/LOG/TRACE equaly and meaningfully;
previously rtprtxsend:LOG and rtprtxreceive:LOG would generate
a totally different amount of log traffic and sometimes it was
impossible to see the information you wanted without useless
spam being printed around
* improve the wording, give a reasonable and self-explanatory
amount of information
* print SSRCs in hex
* avoid G_FOO_FORMAT for readability (we are just printing integers)
2017-09-07 09:39:13 +0100 Tim-Philipp Müller <tim@centricular.com>
* ext/qt/gstplugin.cc:
* ext/qt/qtplugin.pro:
qt: fix build with qmake
Move the package defines for GST_PLUGIN_DEFINE from the
command line into the source file to avoid quoting issues
(-DPACKAGE_NAME="foo" means the quotes won't actually make
it to the compiler and then it no longer gets a string constant).
2017-09-05 16:20:44 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* ext/gtk/gstgtkglsink.c:
Request minimum buffer even if need_pool is FALSE
When tee is used, it will not request a pool, but still it wants to
know how many buffers are required.
https://bugzilla.gnome.org/show_bug.cgi?id=730758
2017-09-05 16:20:44 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* ext/qt/gstqtsink.cc:
Request minimum buffer even if need_pool is FALSE
When tee is used, it will not request a pool, but still it wants to
know how many buffers are required.
https://bugzilla.gnome.org/show_bug.cgi?id=730758
2017-09-05 15:30:40 +0100 Ian Jamison <ian.dev@arkver.com>
* sys/v4l2/gstv4l2object.c:
v4l2object: Handle BT2020 for colorspace and transfer
This was not fully handled in switches and
ub gst_v4l2_object_get_colorspace();
https://bugzilla.gnome.org/show_bug.cgi?id=787313
2017-09-05 15:29:24 +0100 Ian Jamison <ian.dev@arkver.com>
* sys/v4l2/gstv4l2object.c:
v4l2object: Fix colorimetry transfer lookup for 4K video
https://bugzilla.gnome.org/show_bug.cgi?id=787160
2017-09-06 11:25:53 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2src.c:
v4l2src: Check if caps have changed after try_fmt
try_fmt will update the caps colorimetry and interlace-mode. Before this
call, those field are missing. The caps equality check was always
failing when a spurious reconfigure event was received.
2017-09-06 23:55:38 +1000 Jan Schmidt <jan@centricular.com>
* gst/isomp4/gstqtmux.c:
* gst/isomp4/gstqtmuxmap.c:
qtmux: Allow MPEG layer 1/2, AC3 and Opus in qtmux
qtmux is supposed to be the muxer that allows all formats,
with others (mp4mux and friends) being profile-restricted.
2017-09-05 12:56:44 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/gstrtph265depay.c:
rtph265depay: fix keyunit detection
https://bugzilla.gnome.org/show_bug.cgi?id=787254
2017-09-05 15:42:17 +0300 Sebastian Dröge <sebastian@centricular.com>
* ext/jpeg/gstjpegdec.c:
jpegdec: Fix decoding of streams that don't signal exactly twice the height
... and also progressive streams.
2017-09-05 13:28:16 +0300 Sebastian Dröge <sebastian@centricular.com>
* ext/jpeg/gstjpegdec.c:
jpegdec: Handle interlaced MJPEG streams
These come with two JPEG images per buffer of half height than signalled
in the container.
Changes based on Tim-Philipp Müller's 0.10 branch:
https://cgit.freedesktop.org/~tpm/gst-plugins-good/log/?h=jpegdec-interlaced
https://bugzilla.gnome.org/show_bug.cgi?id=568555
2017-09-01 15:00:12 +1000 Matthew Waters <matthew@centricular.com>
* ext/gtk/gstgtkglsink.c:
* ext/gtk/gtkgstglwidget.c:
gtkglsink: expose the created display and context correctly
1. Propagate the GstGLDisplay we create
2. Add the created GstGLContext to the propagated GstGLDisplay
Otherwise with multi-branch GL pipelines involving gtkglsink, things
will fall apart and errors will be genarated somewhere.
2017-09-04 17:06:39 +0200 Edward Hervey <edward@centricular.com>
* gst/audioparsers/gstdcaparse.c:
dcaparse: Really fix "usage before unmap"
Previous patch would try to unref a buffer that was pushed downstream.
Instead only unref when/if needed and keep usage of the cleanup: goto
block
2017-09-03 15:23:10 +0530 Arun Raghavan <arun@arunraghavan.net>
* gst/audioparsers/gstdcaparse.c:
dcaparse: Don't unmap buffer before accessing data from it
The previous patch added a check for a substream header after
gst_buffer_unmap(), which is incorrect.
2017-06-24 18:47:14 +0200 Matej Knopp <matej.knopp@gmail.com>
* gst/audioparsers/gstdcaparse.c:
dcaparse: preserve DTS HD substream
2017-09-01 15:56:04 +0200 Edward Hervey <edward@centricular.com>
* ext/qt/gstqtgl.h:
qt: Only include qtgui-config.h on qt >= 5.9.0
The file does not exist in previous versions
2017-08-31 14:40:44 +1000 Matthew Waters <matthew@centricular.com>
* ext/qt/gstqtgl.h:
qt: the defines for QT_OPENGL_ES_2 have moved
Update the includes to account for that
2017-04-26 13:50:41 +0200 Jochen Henneberg <jh@henneberg-systemdesign.com>
* ext/qt/qtwindow.cc:
qt: ensure GL_DRAW_FRAMEBUFFER
2017-08-14 18:18:07 +0530 Arun Raghavan <arun@arunraghavan.net>
* gst/rtp/gstrtpsbcpay.h:
rtpsbcpay: Fix some tabs that crept in somehow
2017-08-29 19:13:58 +0300 Sebastian Dröge <sebastian@centricular.com>
* gst/rtpmanager/gstrtpbin.c:
rtpbin: Also log local and SR RTP running times when doing ntp-sync=true
2017-08-24 17:06:38 +1000 Matthew Waters <matthew@centricular.com>
* gst/rtpmanager/gstrtpbin.c:
rtpbin: also create session when creating the send_rtcp_src_%u pad
If one requests the send_rtcp_src_%u pad before a recv_rtcp_sink_%u pad,
the session/pad would never be created and NULL was returned.
Switching the request order would work.
https://bugzilla.gnome.org/show_bug.cgi?id=786718
2017-08-26 12:59:35 +0100 Tim-Philipp Müller <tim@centricular.com>
* tests/files/Makefile.am:
* tests/files/cbr_stream.mp3:
* tests/files/stream.mp2:
* tests/files/vbr_stream.mp3:
tests: mpg123audiodec: add files needed by unit tests
2017-08-26 10:10:19 +0100 Tim-Philipp Müller <tim@centricular.com>
* tests/check/Makefile.am:
* tests/check/gst-plugins-good.supp:
* tests/check/pipelines/.gitignore:
* tests/check/pipelines/lame.c:
* tests/check/pipelines/twolame.c:
tests: add basic unit test for twolame as well
2017-08-26 09:59:22 +0100 Tim-Philipp Müller <tim@centricular.com>
* tests/check/pipelines/lame.c:
tests: lame: fix build
2017-08-26 09:52:33 +0100 Tim-Philipp Müller <tim@centricular.com>
* tests/examples/v4l2/.gitignore:
tests: ignore another binary
2017-08-26 09:41:13 +0100 Tim-Philipp Müller <tim@centricular.com>
* REQUIREMENTS:
* configure.ac:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/gst-plugins-good-plugins.hierarchy:
* docs/plugins/gst-plugins-good-plugins.interfaces:
* docs/plugins/inspect/plugin-twolame.xml:
* ext/Makefile.am:
* ext/meson.build:
* ext/twolame/meson.build:
* po/POTFILES.in:
twolame: hook up to build system
https://bugzilla.gnome.org/show_bug.cgi?id=774252
2017-08-26 09:21:44 +0100 Tim-Philipp Müller <tim@centricular.com>
Moving twolame mp2 encoder plugin from -ugly
https://bugzilla.gnome.org/show_bug.cgi?id=774252
2017-08-26 09:03:08 +0100 Tim-Philipp Müller <tim@centricular.com>
* REQUIREMENTS:
* configure.ac:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/gst-plugins-good-plugins.hierarchy:
* docs/plugins/gst-plugins-good-plugins.interfaces:
* docs/plugins/inspect/plugin-lame.xml:
* ext/Makefile.am:
* ext/lame/Makefile.am:
* ext/lame/meson.build:
* ext/meson.build:
* po/POTFILES.in:
* tests/check/Makefile.am:
* tests/check/gst-plugins-good.supp:
* tests/check/meson.build:
lame: hook up to build system
https://bugzilla.gnome.org/show_bug.cgi?id=774252
2017-08-25 21:13:58 +0100 Tim-Philipp Müller <tim@centricular.com>
Moving lame mp3 encoder plugin from -ugly
https://bugzilla.gnome.org/show_bug.cgi?id=774252
2017-08-22 12:39:43 +0100 Julien Isorce <jisorce@oblong.com>
* ext/qt/gstqsgtexture.cc:
* ext/qt/gstqtglutility.cc:
* ext/qt/gstqtsink.cc:
* ext/qt/qtwindow.cc:
qt: fix broken build due to commit 2fd84a6c for gstgl
https://bugzilla.gnome.org/show_bug.cgi?id=784779
2017-07-07 16:15:12 +0100 Julien Isorce <jisorce@oblong.com>
* ext/gtk/Makefile.am:
* ext/gtk/gstgtkglsink.c:
* ext/gtk/gtkgstglwidget.c:
* tests/examples/gtk/glliveshader.c:
gl: do not include GL headers in public gstgl headers
Except for gst/gl/gstglfuncs.h
It is up to the client app to include these headers.
It is coherent with the fact that gstreamer-gl.pc does not
require any egl.pc/gles.pc. I.e. it is the responsability
of the app to search these headers within its build setup.
For example gstreamer-vaapi includes explicitly EGL/egl.h
and search for it in its configure.ac.
For example with this patch, if an app includes the headers
gst/gl/egl/gstglcontext_egl.h
gst/gl/egl/gstgldisplay_egl.h
gst/gl/egl/gstglmemoryegl.h
it will *no longer* automatically include EGL/egl.h and GLES2/gl2.h.
Which is good because the app might want to use the gstgl api only
without the need to bother about gl headers.
Also added a test: cd tests/check && make libs/gstglheaders.check
https://bugzilla.gnome.org/show_bug.cgi?id=784779
2017-08-20 20:41:19 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
* tests/check/meson.build:
meson: Link mpeg123audiodec test against gstfft
Fixing build error:
/run/build/gst-plugins-good/_flatpak_build/../tests/check/elements/mpg123audiodec.c:150: undefined reference to `gst_fft_s32_new'
/run/build/gst-plugins-good/_flatpak_build/../tests/check/elements/mpg123audiodec.c:151: undefined reference to `gst_fft_s32_window'
/run/build/gst-plugins-good/_flatpak_build/../tests/check/elements/mpg123audiodec.c:151: undefined reference to `gst_fft_s32_fft'
/run/build/gst-plugins-good/_flatpak_build/../tests/check/elements/mpg123audiodec.c:147: undefined reference to `gst_fft_s32_free'
2017-08-20 17:15:33 +0100 Tim-Philipp Müller <tim@centricular.com>
* tests/check/pipelines/tagschecking.c:
tests: tagschecking: remove gst-check-xmp-* temp files when done
Also fix temp file creation a bit.
2017-08-20 15:49:12 +0100 Tim-Philipp Müller <tim@centricular.com>
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/inspect/plugin-video4linux2.xml:
docs: update for changes in git
2017-08-20 15:48:24 +0100 Tim-Philipp Müller <tim@centricular.com>
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.hierarchy:
* docs/plugins/inspect/plugin-mpg123.xml:
mpg123: add to docs
2017-08-20 13:56:19 +0100 Tim-Philipp Müller <tim@centricular.com>
* REQUIREMENTS:
* configure.ac:
* ext/Makefile.am:
* ext/meson.build:
* ext/mpg123/meson.build:
* tests/check/Makefile.am:
* tests/check/elements/.gitignore:
* tests/check/meson.build:
mpg123: hook up to build system
https://bugzilla.gnome.org/show_bug.cgi?id=774252
2017-08-20 13:48:48 +0100 Tim-Philipp Müller <tim@centricular.com>
Moving mpg123 plugin from -ugly
2017-08-17 12:23:25 +0100 Tim-Philipp Müller <tim@centricular.com>
* README:
* common:
Automatic update of common submodule
From 48a5d85 to 3f4aa96
2017-08-14 15:28:22 +0800 Sky Juan <skyjuan@realtek.com>
* gst/audioparsers/gstac3parse.c:
ac3parse: fix not-linked handling causing glitches when selecting stream
Fix chain function not handling not-linked from baseparse.
When an input data is separated into 2 buffers, the second buffer
would not be pushed into the adapter if baseparse returns not-linked
for first buffer.
This caused glitches when switching streams and selecting
a stream that was previously unselected.
https://bugzilla.gnome.org/show_bug.cgi?id=786268
2017-08-16 13:57:50 +0200 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
* gst/goom2k1/filters.c:
* gst/goom2k1/filters.h:
* gst/goom2k1/goom_core.c:
goom2k1: Convert source files to UTF-8
Causes problems with the new gtk-doc 1.26 otherwise,
but is a good idea in any case.
https://bugzilla.gnome.org/show_bug.cgi?id=786364
2017-08-14 03:08:41 -0500 Eduard Sinelnikov <eduard@reporty.com>
* gst/wavparse/gstwavparse.c:
* gst/wavparse/gstwavparse.h:
wavparse: Add support for growing WAV files
With some fixes by me.
2017-08-14 17:39:15 +0530 Arun Raghavan <arun@arunraghavan.net>
* gst/rtp/gstrtpsbcpay.c:
rtpsbcpay: Fix compile error
2017-05-21 16:01:14 +0200 Carlos Rafael Giani <dv@pseudoterminal.org>
* ext/qt/qtitem.cc:
* ext/qt/qtitem.h:
qmlglsink: Add itemInitialized signal to QML item
This is useful for autoplay for example. With autoplay, it is necessary to
wait until the scene graph is fully set up. This signal is emitted once the
QML item node is ready. So, inside a connected slot, the pipeline's state
can be set to PLAYING to automatically start playback as soon as the QML
script is loaded.
https://bugzilla.gnome.org/show_bug.cgi?id=786246
2017-08-14 10:36:56 +0000 Jochen Henneberg <jh@henneberg-systemdesign.com>
* gst/rtp/gstrtpsbcpay.c:
rtpsbcpay: fix if buffer size exceeds MTU
The plugin queued buffer data if not all buffer data fit
into a single RTP packet. Now RTP packets are pushed as long
as enough data is available.
2017-07-27 17:21:48 +0300 George Kiagiadakis <george.kiagiadakis@collabora.com>
* ext/vpx/gstvpxenc.c:
vpxenc: discard frames that have been dropped by libvpx
This fixes a memory leak. When dropframe-threshold has been set,
libvpx may output less frames than the input ones, which causes
some GstVideoCodecFrames to queue up in GstVideoEncoder's internal
frame queue with no chance of ever being all released. And because
the frames keep references to the input buffers, the input buffer
pool keeps allocating new buffers and memory usage grows very fast.
For example the following pipeline's memory usage grows at a rate
of about 1GB per minute!
videotestsrc ! capsfilter caps=video/x-raw,width=1920,height=1080,framerate=30/1,format=I420 ! \
vp8enc target-bitrate=1000000 end-usage=cbr dropframe-threshold=95 ! fakesink
https://bugzilla.gnome.org/show_bug.cgi?id=783086
2017-08-08 13:11:58 +0200 Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>
* gst/rtpmanager/rtpstats.c:
* gst/rtpmanager/rtpstats.h:
rtpstats: fix unsigned integer comparisons.
Callers of the API (rtpsource, rtpjitterbuffer) pass clock_rate
as a signed integer, and the comparison "<= 0" is used against
it, leading me to think the intention was to have the field
be typed as gint32, not guint32.
This led to situations where we could call scale_int with
a MAX_UINT32 (-1) guint32 as the denom, thus raising an
assertion.
https://bugzilla.gnome.org/show_bug.cgi?id=785991
2017-08-10 14:44:35 +0100 Tim-Philipp Müller <tim@centricular.com>
* ext/taglib/meson.build:
taglib: use -fvisibility=hidden with this C++ plugin in meson too
Also pass args as cpp_args.
2017-03-22 15:25:17 +0100 Michael Olbrich <m.olbrich@pengutronix.de>
* gst/isomp4/qtdemux.c:
qtdemux: allow larger files
For really long files such as contiguous recordings of a whole day, the
50MB limit is not sufficient.
https://bugzilla.gnome.org/show_bug.cgi?id=781458
2017-08-10 16:08:06 +0300 Sebastian Dröge <sebastian@centricular.com>
* gst/isomp4/fourcc.h:
* gst/isomp4/qtdemux.c:
qtdemux: Fix offsets for reading lpcm specific fields
We were reading at the completely wrong positions, 16 bytes later in the
data.
Also add support for high-aligned samples.
2017-08-10 14:01:09 +0100 Tim-Philipp Müller <tim@centricular.com>
* meson.build:
meson: don't export symbols by default
Only plugin entry points should be exported.
Currently plugins might export more symbols with
the meson build, as we don't have the exports
regexp there that we pass to libtool.
2017-08-10 15:14:31 +0530 Deepak Srivastava <srivastava.d@samsung.com>
* gst/wavparse/gstwavparse.c:
wavparse: Fix memory leak in wavparse element
Fixing of leaking the text field of the GstWavParseNote and
GstWavParseLabl structure.
https://bugzilla.gnome.org/show_bug.cgi?id=785429
2017-08-08 10:37:12 +0000 Cyril Lashkevich <notorca@gmail.com>
* sys/v4l2/gstv4l2bufferpool.c:
v4l2bufferpool: Don't mark jpeg frames as deltas
JPEG formats are encoded, but they never have keyframe flag. But in
fact they are keyframes
https://bugzilla.gnome.org/show_bug.cgi?id=785990
2017-08-06 13:06:45 +0100 Philippe Normand <philn@igalia.com>
* sys/osxvideo/Makefile.am:
osxvideo: rename library according to the plugin name
https://bugzilla.gnome.org/show_bug.cgi?id=785880
2017-08-02 17:16:21 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2bufferpool.c:
v4l2bufferpool: Don't drop buffer ref on qbuf
This function no longer take ownership of the buffer.
CID 1414800
2017-08-02 17:13:55 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2object.c:
* sys/v4l2/gstv4l2videodec.c:
v4l2: Enable VP9 format
This was missing, preventing the encoder and decoder to work
properly. This also adds support for camera that would produce
VP9 (if that exists).
2017-08-02 12:28:38 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2bufferpool.h:
* sys/v4l2/gstv4l2h263enc.h:
* sys/v4l2/gstv4l2h264enc.h:
* sys/v4l2/gstv4l2mpeg4enc.h:
* sys/v4l2/gstv4l2sink.h:
* sys/v4l2/gstv4l2src.h:
* sys/v4l2/gstv4l2transform.h:
* sys/v4l2/gstv4l2videodec.h:
* sys/v4l2/gstv4l2videoenc.h:
* sys/v4l2/gstv4l2vp8enc.h:
* sys/v4l2/gstv4l2vp9enc.h:
v4l2: Remove spurious CATEGORY_EXTERN
These have been copy pasted all over the place and are not used anymore.
All object have it's own category now. This fixes build warning since
the VP9 decoder had vp8 category declared.
2017-08-02 10:39:46 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2h264enc.c:
* sys/v4l2/gstv4l2mpeg4enc.c:
* sys/v4l2/gstv4l2videoenc.c:
* sys/v4l2/gstv4l2videoenc.h:
* sys/v4l2/gstv4l2vp8enc.c:
* sys/v4l2/gstv4l2vp9enc.c:
v4l2videoenc: Move the profile/level negotation in the base class
This removes duplicated code across different codec.
2017-08-02 09:36:08 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2.c:
* sys/v4l2/gstv4l2h263enc.c:
* sys/v4l2/gstv4l2h264enc.c:
* sys/v4l2/gstv4l2mpeg4enc.c:
* sys/v4l2/gstv4l2videoenc.c:
* sys/v4l2/gstv4l2videoenc.h:
* sys/v4l2/gstv4l2vp8enc.c:
* sys/v4l2/gstv4l2vp9enc.c:
v4l2videoenc: Turn gst_v4l2_is_video_enc into a helper
This reduces the amount of code needed in each codec class.
2017-08-01 16:01:11 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/Makefile.am:
* sys/v4l2/gstv4l2.c:
* sys/v4l2/gstv4l2vp8enc.c:
* sys/v4l2/gstv4l2vp8enc.h:
* sys/v4l2/gstv4l2vp9enc.c:
* sys/v4l2/gstv4l2vp9enc.h:
* sys/v4l2/meson.build:
v4l2: Add VP8/9 encoder support
2017-07-31 11:56:05 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2object.c:
v4l2object: Use mmap64 to match libv4l2 signature
https://bugzilla.gnome.org/show_bug.cgi?id=785628
2017-08-01 09:22:43 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2bufferpool.c:
v4l2bufferpool: Copy flags and timestamp when importing
Whenever we import from downstream pool (userptr or dmabuf-import), we
should copy over the flags and timestamp, otherwise downstream will not
get proper synchronization or will not be able to notice frames that has
corruption in it.
https://bugzilla.gnome.org/show_bug.cgi?id=785680
2017-07-31 16:09:30 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/Makefile.am:
* sys/v4l2/gstv4l2.c:
* sys/v4l2/gstv4l2h263enc.c:
* sys/v4l2/gstv4l2h263enc.h:
* sys/v4l2/meson.build:
v4l2: Add H263 Encoder support
2017-07-27 13:51:25 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/Makefile.am:
v4l2: Add missing no-inst header
2017-07-26 15:18:01 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/Makefile.am:
* sys/v4l2/gstv4l2.c:
* sys/v4l2/gstv4l2mpeg4enc.c:
* sys/v4l2/gstv4l2mpeg4enc.h:
* sys/v4l2/gstv4l2videoenc.c:
* sys/v4l2/gstv4l2videoenc.h:
* sys/v4l2/meson.build:
v4l2: Add interface for MPEG4 encoding
2017-07-27 10:51:07 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2.c:
* sys/v4l2/gstv4l2h264enc.c:
* sys/v4l2/gstv4l2h264enc.h:
* sys/v4l2/gstv4l2transform.c:
* sys/v4l2/gstv4l2transform.h:
* sys/v4l2/gstv4l2videodec.c:
* sys/v4l2/gstv4l2videodec.h:
* sys/v4l2/gstv4l2videoenc.c:
* sys/v4l2/gstv4l2videoenc.h:
v4l2: Ignore register issue and keep probing
Don't stop registering the other dynamic plugins if one registration
fails.
2017-07-27 14:21:34 +0300 Sebastian Dröge <sebastian@centricular.com>
* gst/law/mulaw-decode.c:
mulawdec: Unmap input buffer if failing to map the output buffer
2017-07-27 09:22:25 +0530 Satya Prakash Gupta <sp.gupta@samsung.com>
* gst/law/alaw-decode.c:
alawdec: Fix Memory leak in error case
https://bugzilla.gnome.org/show_bug.cgi?id=785435
2017-07-26 20:36:15 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/ext/v4l2-common.h:
* sys/v4l2/ext/v4l2-controls.h:
* sys/v4l2/ext/videodev2.h:
v4l2: Update external files with latest
This is copied from the linux kernel with only some include changes so
it works outside the kernel headers.
2017-07-18 10:41:40 +0300 Sebastian Dröge <sebastian@centricular.com>
* gst/matroska/matroska-mux.c:
matroskamux: For audio tracks, take the default duration from the first buffer
... if we don't have any better idea from the caps. This allows writing
SimpleBlocks for a majority of audio streams where the duration of
frames is usually fixed. And as a side effect, allows VLC to play
streams with Opus as it only works with SimpleBlocks currently:
https://trac.videolan.org/vlc/ticket/18545
https://bugzilla.gnome.org/show_bug.cgi?id=784969
2017-07-24 16:45:40 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2allocator.c:
* sys/v4l2/gstv4l2bufferpool.c:
* sys/v4l2/gstv4l2object.h:
v4l2: Fix compilation without libv4l2
2017-07-24 16:13:56 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2allocator.c:
* sys/v4l2/gstv4l2bufferpool.c:
v4l2: Keep ref to element in allocator/pool
Removes the FIXME/Question in the buffer pool and add a ref to the
element in the GstAllocator too. This ref is strictly required to keep
the GstV4l2Object structure around.
2017-07-24 14:27:05 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2object.c:
* sys/v4l2/gstv4l2object.h:
v4l2object: Removed unused members
2017-07-24 14:19:02 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2allocator.c:
* sys/v4l2/gstv4l2allocator.h:
* sys/v4l2/gstv4l2bufferpool.c:
* sys/v4l2/gstv4l2h264enc.c:
* sys/v4l2/gstv4l2object.c:
* sys/v4l2/gstv4l2object.h:
* sys/v4l2/gstv4l2radio.c:
* sys/v4l2/gstv4l2sink.c:
* sys/v4l2/gstv4l2src.c:
* sys/v4l2/gstv4l2videodec.c:
* sys/v4l2/gstv4l2videoenc.c:
* sys/v4l2/v4l2_calls.c:
v4l2: Add run-time environment to enable libv4l2
The library has started preventing a lot of interesting use cases,
like CREATE_BUFS, DMABuf, usage of TRY_FMT. As the libv4l2 is totally
inactive and not maintained, we decided to disable it. As a convenience
we added a run-time environment that let you enable it for testing.
GST_V4L2_USE_LIBV4L2=1
This of course only works if you have enabled libv4l2 at build time.
2017-07-17 10:04:02 +0200 Nicola Murino <nicola.murino@gmail.com>
* ext/jpeg/gstjpegenc.c:
jpegenc: declare quality property changeable in PLAYING state
https://bugzilla.gnome.org/show_bug.cgi?id=785012
2017-07-21 23:34:59 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2object.c:
v4l2object: Fix colorimetry validation
While not documented, gst_video_colorimetry_matches() only accepts well
known names. Looking at the code and unit test, this seems to be on
purpose, so fixing by parsing the string and compating the colorimetry
structures.
2017-07-21 15:40:24 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2videoenc.c:
v4l2encoder: Fix negotiation error handling
The subclass negotiated function will call set_format, if that fails the
pool will not be created. We ended up with an assertion.
GStreamer-CRITICAL **: gst_buffer_pool_set_active: assertion 'GST_IS_BUFFER_POOL (pool)' failed
2017-07-19 22:25:49 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2src.c:
v4l2src: Speedup camera startup by skipping try_fmt
In this commit, we enabled skip_try_fmt_probes quirk in order to speed
up the start which is known to be disastrously slow with certain USB
cameras.
This has the side effect that we needed to rewrite the entire
negotiation process in a way that we iterate over the possible caps
until we find one that works.
The new negotiation method consist of extracting a preferred structure
from the peer caps and using this to fixate and sort the caps. To
reflect the old behaviour, we sort all resolution strictly bigger
to the preferred one with the closes one first. The rest is appended,
keeping the same order. We then normalize the caps in case there was
some list of interlace-mode or colorimetry left. We finally iterate
over all fixed caps and try it. 99% of the time, the first or the
second one should work, whit the result of a single S_FMT being issues.
From there, it will be relatively easy to introduce new negotiation
algorithm. The current algorithm is made for optimal image quality
with a scaling sink that sets it's window resolution as preference.
This the case if for:
v4l2src ! videoconvert ! videoscale ! ximagesink
Other strategy would be needed to optimize for non-scaling sink like
ximagesink or kmssink when the driver does not scale.
https://bugzilla.gnome.org/show_bug.cgi?id=785156
2017-07-19 22:09:38 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2object.c:
* sys/v4l2/gstv4l2object.h:
v4l2object: Introduce quirk to skip slow probes
skip_try_fmt_probes quirk is set, V4L2 object will not probe for
interlace-mode and colorimetry to avoid relying on try_fmt. This quirk
will be used by v4l2src to avoid desastrous startup time with slow
USB webcams.
When this quirk is enabled, caller will have to iterate over the
negotiated caps as it may contains unsupported formats. If the peer
didn't choose a specific interlace-mode, or colorimetry, the value
chosen by the driver is set into the caps. For this reason, when this
mode is enabled, gst_v4l2_object_set_format() will require writable
caps.
https://bugzilla.gnome.org/show_bug.cgi?id=785156
2017-07-19 22:07:32 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2object.c:
v4l2object: always set the GstV4l2Error on error
Some of the error case were conditional to using try_fmt or not.
This is slightly unexpected, always set the error so the caller
can decide.
https://bugzilla.gnome.org/show_bug.cgi?id=785156
2017-07-19 22:05:49 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2object.c:
v4l2object: Minor style fix and useful trace
https://bugzilla.gnome.org/show_bug.cgi?id=785156
2017-07-19 22:03:29 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2object.c:
v4l2object: Fix try/s_fmt errors
According to the spec,TRY_FMT cannot return EBUSY, though it can
return EINVAL if it was not possible to update the format to
something supported.
https://bugzilla.gnome.org/show_bug.cgi?id=785156
2017-07-19 22:01:26 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2object.c:
v4l2object: Validate colorimetry in S/TRY_FMT
This is in preparation for removing slow TRY_FMT probes for
colorimetry. As we won't have tried that colorimetry we cannot
assume the driver will accept it.
https://bugzilla.gnome.org/show_bug.cgi?id=785156
2017-07-19 21:56:14 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2object.c:
v4l2object: Validate field in S/TRY_FMT
This is in preparation from removing the slow TRY_FMT probes for
interlacing. As we won't have tried that interlace-mode already
we need to validate that the driver isn't refusing it.
https://bugzilla.gnome.org/show_bug.cgi?id=785156
2017-07-21 19:01:19 +0100 Tim-Philipp Müller <tim@centricular.com>
* tests/icles/test-accurate-seek.c:
tests: icles: fix build
Can't do additions/subtractions on void* pointers.
2017-07-21 11:04:17 -0400 Thibault Saunier <thibault.saunier@osg.samsung.com>
* tests/icles/test-accurate-seek.c:
tests:icles: Fix previous patch by implementing our memmem
Using the string version of it will fail on '\0'.
2017-07-21 10:17:00 -0400 Thibault Saunier <thibault.saunier@osg.samsung.com>
* tests/icles/test-accurate-seek.c:
tests:icles: Do not use memmem GNU extension function
As it is not avalaible on windows/msvc and we can use pure GLib for that
2017-07-20 17:21:05 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/directsound/Makefile.am:
directsound: Fix .c file name in Makefile
This was broken by accident, bad search and replace.
2017-07-20 11:02:10 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* Makefile.am:
* sys/waveform/Makefile.am:
waveform: Fix DLL name to match plugin name
https://bugzilla.gnome.org/show_bug.cgi?id=785168
2017-07-20 10:38:32 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* Makefile.am:
* sys/directsound/Makefile.am:
* sys/directsound/meson.build:
directsound: Fix DLL name to match plugin name
https://bugzilla.gnome.org/show_bug.cgi?id=785168
2017-07-19 12:38:03 +0200 Mark Nauwelaerts <mnauw@users.sourceforge.net>
* gst/isomp4/qtdemux.c:
qtdemux: preferably send open-ended segment rather than repeated segment events
2017-07-19 11:27:32 +0200 Mark Nauwelaerts <mnauw@users.sourceforge.net>
* gst/isomp4/qtdemux.c:
qtdemux: fix seeking in fragmented file without mfra random access info
... which no longer worked due to unconditionally clearing sample info and
ending up in inconsistent state. Let's tread a bit more carefully and also
allow for the old seek handling that resorts to scanning if no mfra info
is available.
2017-07-19 10:42:46 +0200 Nicolas Dechesne <nicolas.dechesne@linaro.org>
* sys/v4l2/gstv4l2videodec.c:
v4l2videodec: add some useful debug messages
Add a couple of useful debug traces , they happened to be useful to
debug/investigate a 4K video playback issue with v4l2, so let's make these
changes more permanent.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
https://bugzilla.gnome.org/show_bug.cgi?id=785109
2017-07-18 11:28:37 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2object.c:
v4l2: Fix 4K colorimetry
Since 1.6, the transfer function for BT2020 has been changed from BT709
to BT2020_12. It's the same function, but with more precision. As a side
effect, the V4L2 colorpsace didn't match GStreamer colorspace. When
GStreamer ended up making a guess, it would not match anything supported
by V4L2 anymore. This this by using BT2020_12 for BT2020 colorspace and
BT2020 transfer function in replacement of BT709 whenever a 4K
resolution is detected.
2017-07-14 16:21:38 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2object.c:
v4l2object: Only check CROPCAP for par once
The pixel aspect ratio is documented to not change unless the TV
Standard is changed. So this mean that this will be uniform across all
possible format and resolutions.
https://bugzilla.gnome.org/show_bug.cgi?id=784674
2017-07-18 10:01:13 +0300 Sebastian Dröge <sebastian@centricular.com>
* tests/check/elements/matroskamux.c:
Revert "matroskamux: adjust unit test to modified behaviour"
This reverts commit 8fe478c8a7746cd2c63f20d23e97e26e1a0e6192.
We're back to previous behaviour
2017-07-18 00:26:11 +0200 Nicola Murino <nicola.murino@gmail.com>
* gst/matroska/matroska-mux.c:
* gst/matroska/matroska-mux.h:
matroskamux: add properties to control cluster duration
https://bugzilla.gnome.org/show_bug.cgi?id=784971
2017-07-17 20:47:26 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/v4l2_calls.c:
v4l2: UVC driver is named uvcvideo these days
The quirk to avoid probing interlacing didn't work anymore as the driver
is now name uvcvideo. This should slightly speed up camera startup.
2017-07-12 21:02:39 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2object.c:
v4l2object: Remove unused defines
2017-07-12 20:53:51 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2object.h:
* sys/v4l2/v4l2_calls.c:
v4l2: Make gst_v4l2_get_capabilities static
It's not used outside of v4l2_calls.c
2017-07-12 20:49:47 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/Makefile.am:
* sys/v4l2/gstv4l2.c:
* sys/v4l2/gstv4l2allocator.c:
* sys/v4l2/gstv4l2bufferpool.c:
* sys/v4l2/gstv4l2colorbalance.h:
* sys/v4l2/gstv4l2deviceprovider.c:
* sys/v4l2/gstv4l2h264enc.c:
* sys/v4l2/gstv4l2object.c:
* sys/v4l2/gstv4l2object.h:
* sys/v4l2/gstv4l2radio.c:
* sys/v4l2/gstv4l2transform.c:
* sys/v4l2/gstv4l2tuner.c:
* sys/v4l2/gstv4l2videodec.c:
* sys/v4l2/gstv4l2videoenc.c:
* sys/v4l2/gstv4l2vidorient.c:
* sys/v4l2/v4l2_calls.c:
* sys/v4l2/v4l2_calls.h:
v4l2: Merge v4l2_calls.h into gstv4l2object.h
First step of a larger cleanup, all function from v4l2_calls are in fact
methods on GstV4l2Object. This split makes the code really confusing.
This also remove no longer unused macros.
2017-07-15 14:57:49 +0100 Tim-Philipp Müller <tim@centricular.com>
* ext/mpg123/gstmpg123audiodec.c:
mpg123audiodec: fix caps leak
The pad template takes its own ref, so we should unref the caps.
https://bugzilla.gnome.org/show_bug.cgi?id=784982
2017-07-15 12:48:19 +0100 Tim-Philipp Müller <tim@centricular.com>
* po/meson.build:
meson: po: use glib preset and read language list from LINGUAS
Supported since meson 0.37, so we can use it now.
2017-07-14 12:12:56 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2object.c:
v4l2object: Trace unknown fourcc as text
This makes it easier to find out what is not supported.
2017-07-14 11:54:57 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2object.c:
* sys/v4l2/gstv4l2videodec.c:
* sys/v4l2/gstv4l2videoenc.c:
v4l2: Don't probe for unneeded format
For v4l2videodec/enc, we generate elements per formats, and in
this case we can speed up the start up by only probing the format
we care about.
2017-07-13 12:32:00 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2videodec.c:
v4l2videodec: Implement stable element names
Before that, each m2m node would be wrapped as a single, multi-format
decoder element. As a unique name was needed, we where using the device
name, which changes between re-boots. This led to unpredictable element
names. In this patch, we generate an element per codec, using
v4l2<codec>dec name. If there is multiple decoder for the same format,
the following elements will be named v4l2<node><codec>dec.
https://bugzilla.gnome.org/show_bug.cgi?id=784908
2017-07-13 14:50:44 +0300 Sebastian Dröge <sebastian@centricular.com>
* ext/soup/gstsouphttpsrc.c:
souphttpsrc: Post an element message with the HTTP headers on the bus too
Instead of just sending a sticky event with them downstream. This allows
getting the HTTP headers easily in the application, and especially also
on errors.
2017-07-13 12:47:02 +0300 Sebastian Dröge <sebastian@centricular.com>
* gst/isomp4/qtdemux.c:
qtdemux: Fix parsing of RLE depth
Regression introduced by 86b427dc70562f891a551ffc9f96cefe1cafcddd
https://bugzilla.gnome.org/show_bug.cgi?id=784812
2017-07-12 15:29:32 +1000 Jan Schmidt <jan@centricular.com>
* ext/qt/gstqtsink.cc:
* ext/qt/gstqtsink.h:
* ext/qt/qtitem.cc:
* ext/qt/qtitem.h:
qt: Use a proxy object for access to the QML widget
QML can destroy the video widget at any time, leaving
us with a dangling pointer. Use a lock and a proxy
object to cope with that, and block in the widget
destructor if there are ongoing calls into the widget.
2017-07-10 18:57:11 +0200 Philippe Renon <philippe_renon@yahoo.fr>
* ext/shout2/gstshout2.h:
shout2: use gint and guint in place of int and uint
this fixes a compilation error with gcc 7.1.0 on mys2 where uint is not defined
https://bugzilla.gnome.org/show_bug.cgi?id=784758
2017-07-07 21:15:57 +0900 Yasushi SHOJI <yashi@atmark-techno.com>
* gst/rtp/gstrtpgsmpay.c:
rtpgsmpay: fix accidental garbage data before actual payload
Do not allocate payload size outbuf if appending payload buffer.
The commit 137672ff1824948bda4b1b1967de8c24a0055b67 attached payload
to the output buffer but forgot to remove payload allocation. That
effectively doubled payload size and add zero'ed or random bytes.
Makes the following pipeline work again:
gst-launch-1.0 -v audiotestsrc wave=2 ! gsmenc ! rtpgsmpay ! rtpgsmdepay ! gsmdec ! autoaudiosink
https://bugzilla.gnome.org/show_bug.cgi?id=784616
2017-07-01 18:57:47 +0200 Mark Nauwelaerts <mnauw@users.sourceforge.net>
* gst/matroska/matroska-demux.c:
matroskademux: segment seek position is expressed in buffer time
... so it need not be corrected again for stream start
2017-07-09 10:54:27 +0200 Mark Nauwelaerts <mnauw@users.sourceforge.net>
* gst/avi/gstavidemux.c:
avidemux: provide average bitrate tag
2017-07-07 23:49:44 -0700 Reynaldo H. Verdejo Pinochet <reynaldo@osg.samsung.com>
* tests/examples/v4l2/v4l2src-renegotiate.c:
examples: v4l2: fix wrong initializations brought by 4e8ad583022671c5
https://bugzilla.gnome.org/show_bug.cgi?id=682770
2015-02-27 13:03:42 -0300 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* tests/examples/v4l2/Makefile.am:
* tests/examples/v4l2/meson.build:
* tests/examples/v4l2/v4l2src-renegotiate.c:
examples: v4l2: add example for v4l2src renegotiation
Based on work from Thiago Santos <thiagoss@osg.samsung.com>
https://bugzilla.gnome.org/show_bug.cgi?id=682770
2017-07-07 11:58:10 +0100 Tim-Philipp Müller <tim@centricular.com>
* meson.build:
meson: find python3 via python3 module
https://bugzilla.gnome.org/show_bug.cgi?id=783198
2017-07-05 14:44:41 +0100 Tim-Philipp Müller <tim@centricular.com>
* tests/check/Makefile.am:
tests: rtpbin: fix build in uninstalled setup
2017-07-04 17:42:25 -0400 Olivier Crête <olivier.crete@collabora.com>
* gst/rtpmanager/rtpsession.c:
* tests/check/Makefile.am:
* tests/check/elements/rtpbin.c:
rtpsession: Send EOS if all internal sources sent bye
The ones which are not internal should not matter, and we should
wait for all sources to have sent their BYEs.
And add unit test
https://bugzilla.gnome.org/show_bug.cgi?id=773218
2017-07-04 12:24:41 -0400 Olivier Crête <olivier.crete@collabora.com>
* gst/rtpmanager/rtpsession.c:
rtpsession: Only send EOS if all sources have been marked bye
Now that multiple sender RTPSource can share the same RTPSession, we
must not send an EOS unless they're all marked bye.
2017-07-04 11:49:29 -0400 Thibault Saunier <thibault.saunier@osg.samsung.com>
* ext/libcaca/gstcacasink.c:
caca: Do not include, unused, sys/time.h
Which moreover makes building on windows (mingw/msvc) fail:
https://ci.appveyor.com/project/thiblahute/gst-build-ge9m5
2017-07-03 11:47:13 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* gst/rtpmanager/gstrtprtxreceive.c:
rtprtxreceive: Add memory and boudary checks
This element was not checking if mapping the RTP buffer and the payload
worked, and was not checking if the RTX payload was large enough.
https://bugzilla.gnome.org/show_bug.cgi?id=784484
2017-07-04 14:58:00 +0900 Seungha Yang <sh.yang@lge.com>
* ext/soup/gstsouphttpsrc.c:
souphttpsrc: Unset limit on the number of connection if soup session sharing is used
Soup allows only up to two connections per host in a session,
if we use default value. When session sharing is used, however,
more connections might be required in a session.
(e.g., multi-audio adaptive streaming case)
https://bugzilla.gnome.org/show_bug.cgi?id=784495
2017-07-03 20:27:29 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/imagefreeze/gstimagefreeze.c:
imagefreeze: fix use-after-free on seek event
Get seqnum before unreffing the seek event.
https://bugzilla.gnome.org/show_bug.cgi?id=784486
2017-07-01 18:59:14 +0200 Mark Nauwelaerts <mnauw@users.sourceforge.net>
* gst/isomp4/gstqtmux.c:
qtmux: robustify time tracking for sparse subtitle stream
2017-07-01 18:59:07 +0200 Mark Nauwelaerts <mnauw@users.sourceforge.net>
* gst/isomp4/gstqtmux.c:
qtmux: correctly track chunk size of subtitle stream
... thereby ensuring correct chunk offset tracking for all streams.
2017-06-27 15:59:18 +0100 Julien Isorce <jisorce@oblong.com>
* gst/rtpmanager/rtpstats.h:
rtpstats: fix assertion 'denom > 0' failed
gst_util_uint64_scale_int takes a gint as denom parameter
whereas ctx->clock_rate is a guint32.
It happens when gst_rtp_packet_rate_ctx_reset set clock_rate
to -1.
So just define clock_rate as gint like it is done in rtpsource.h
https://bugzilla.gnome.org/show_bug.cgi?id=784250
2017-06-28 14:05:27 -0500 Matt Fischer <matt.fischer@garmin.com>
* sys/v4l2/gstv4l2bufferpool.c:
v4l2: Block recursive calls to resurect_buffer
When resurrecting a buffer, the subsequent free call can result
in the group-released handler being called again, which causes
a recursive loop. This patch blocks the signal handler during
the time that it executes, ensuring that the loop will not occur.
https://bugzilla.gnome.org/show_bug.cgi?id=759292
2017-06-20 16:39:36 +0200 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
* tests/check/elements/souphttpsrc.c:
tests: souphttpsrc: Avoid deprecated ssl-ca-file property
SoupSession's ssl-ca-file property is deprecated. Use the recommended
tls-database property.
This is a bit more complex as it requires creating a GTlsFileDatabase
object for an absolute (!) path to the CA certificates file.
https://bugzilla.gnome.org/show_bug.cgi?id=784005
2017-06-20 16:37:55 +0200 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
* tests/check/elements/souphttpsrc.c:
tests: souphttpsrc: Avoid deprecated server ssl properties
The ssl-cert-file and ssl-key-file properties are deprecated. Use the
soup_server_set_ssl_cert_file function to load the files.
https://bugzilla.gnome.org/show_bug.cgi?id=784005
2017-06-20 16:34:41 +0200 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
* tests/check/elements/souphttpsrc.c:
tests: souphttpsrc: Make ssl_cert/key_file static
Just a bit of cleanup.
https://bugzilla.gnome.org/show_bug.cgi?id=784005
2017-06-20 16:28:35 +0200 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
* tests/files/test-cert.pem:
tests: souphttpsrc: Update test-cert.pem
Recent GnuTLS disregards the Common Name and only looks at the Subject
Alternative Name extension. Since our test-cert has no SAN extension,
validation fails.
Generate a new certificate with SAN. In addition to 127.0.0.1, for good
measure make it valid for localhost and ::1, too.
https://bugzilla.gnome.org/show_bug.cgi?id=784005
2017-06-29 15:22:39 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* ext/soup/gstsouphttpsrc.c:
souphttpsrc: Allow any type of proxy
Currently we only allowed HTTP proxy. Don't filter for the scheme, just check
if it looks like an URI. Soup will warn if the URI is invalid or if
proxy protocol is not supported. This enables using SOCKS 4/5 which is
directly implemented into GIO.
https://bugzilla.gnome.org/show_bug.cgi?id=783012
2017-05-24 15:07:51 +0200 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
* sys/v4l2/gstv4l2object.c:
v4l2: increase by one the number of allocated buffers
Increasing this number fix a buffer starvation problem I'm hitting
with a "v4l2src ! kmssink" pipeline.
kmssink requests 2 buffer as it keeps a reference on the last rendered
one. So we were allocating 3 buffers for the pipeline.
Once the first 2 buffers have been pushed we ended up with:
- one buffer queued in v4l2
- one being pushed
- one kept as last rendered
If this 3rd buffer is released after that v4l2 used the first one to
capture we end up with a buffer starvation problem as no buffer is currently
queued in v4l2 for capture.
Fixing this by adding one extra buffer to the pipeline so when one
buffer is being pushed downstream the other can already be queued to
capture the next frame.
We were already adding 3 buffers if downstream didn't reply to the
allocation query. I reduced this number to 2 to compensate the extra
buffer which is now always added.
https://bugzilla.gnome.org/show_bug.cgi?id=783049
2017-06-29 18:59:58 +0300 Sebastian Dröge <sebastian@centricular.com>
* gst/rtsp/gstrtspsrc.c:
rtspsrc: Create send/recv mutexes once, not on every connect()
Also fixes a crash caused by freeing an uninitialized mutex in an error
case.
https://bugzilla.gnome.org//show_bug.cgi?id=784282
2017-06-27 18:20:17 -0500 Matt Fischer <matt.fischer@garmin.com>
* sys/v4l2/gstv4l2allocator.c:
v4l2allocator: Fix memory leak with dmabuf
This patch fixes a memory leak that is caused if the dmabuf file
descriptor dup fails. Previously, _cleanup_failed_alloc() would
not unref the memory because mems_allocated had not yet been
incremented.
https://bugzilla.gnome.org/show_bug.cgi?id=784302
2017-06-28 19:46:04 +0200 Mark Nauwelaerts <mnauw@users.sourceforge.net>
* gst/isomp4/qtdemux_types.c:
qtdemux: specify '_swr' atom as a container atom
... so it is parsed as an mp4 style metadata atom as written by muxer
2017-06-27 20:14:57 +0200 Mark Nauwelaerts <mnauw@users.sourceforge.net>
* gst/isomp4/atoms.c:
qtmux: initialize mdhd language code as undefined
2017-06-22 15:34:42 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* gst/rtpmanager/gstrtpjitterbuffer.c:
* gst/rtpmanager/rtpjitterbuffer.c:
* gst/rtpmanager/rtpjitterbuffer.h:
rtpjitterbuffer: Add a faststart-min-packets property
When set this property will allow the jitterbuffer to start delivering
packets as soon as N most recent packets have consecutive seqnum. A
faststart-min-packets of zero disables this feature. This heuristic is
also used in rtpsource which implements the probation mechanism and a
similar heuristic is used to handle long gaps.
https://bugzilla.gnome.org/show_bug.cgi?id=769536
2017-06-23 16:18:57 -0400 Thibault Saunier <thibault.saunier@osg.samsung.com>
* meson.build:
meson: Allow using glib as a subproject
2017-06-26 11:09:48 +0100 Tim-Philipp Müller <tim@centricular.com>
* tests/examples/audiofx/meson.build:
* tests/examples/cairo/meson.build:
* tests/examples/equalizer/meson.build:
* tests/examples/jack/meson.build:
* tests/examples/level/meson.build:
* tests/examples/meson.build:
* tests/examples/rtp/meson.build:
* tests/examples/shapewipe/meson.build:
* tests/examples/spectrum/meson.build:
* tests/examples/v4l2/meson.build:
* tests/meson.build:
meson: build examples
https://bugzilla.gnome.org/show_bug.cgi?id=784134
2017-06-26 09:47:55 +0100 Tim-Philipp Müller <tim@centricular.com>
* meson.build:
meson: fix with-package-name option
https://bugzilla.gnome.org/show_bug.cgi?id=784082
2017-06-26 09:38:46 +0100 Tim-Philipp Müller <tim@centricular.com>
* tests/icles/meson.build:
meson: tests: icles: simplify build file
2017-06-26 00:22:05 +0100 Tim-Philipp Müller <tim@centricular.com>
* tests/icles/meson.build:
* tests/meson.build:
meson: build tests/icles/
https://bugzilla.gnome.org/show_bug.cgi?id=784134
2017-06-19 21:13:42 +0200 Mark Nauwelaerts <mnauw@users.sourceforge.net>
* gst/isomp4/gstqtmux.c:
* gst/isomp4/gstqtmux.h:
qtmux: correctly calculate overall first_ts to ensure stream sync
... by minding and compensating for the dts_adjustment that may have
been introduced in the PTS timeline.
2017-06-10 15:14:41 +0200 Mark Nauwelaerts <mnauw@users.sourceforge.net>
* gst/matroska/matroska-demux.c:
* gst/matroska/matroska-demux.h:
matroskademux: track highest known cluster position and time
... to use as a fallback initial duration estimate and to provide for
interpolation when scanning for position.
2017-06-10 13:46:20 +0200 Mark Nauwelaerts <mnauw@users.sourceforge.net>
* gst/matroska/matroska-demux.c:
matroskademux: improve and simplify searching for cluster and position
... avoiding inefficiency proportional to file size
2017-06-08 16:55:29 +0200 Mark Nauwelaerts <mnauw@users.sourceforge.net>
* gst/matroska/matroska-demux.c:
matroskademux: increase chunk size when scanning for cluster
2017-06-08 16:39:06 +0200 Mark Nauwelaerts <mnauw@users.sourceforge.net>
* gst/matroska/matroska-demux.c:
matroskademux: maintain variable state when searching for position
... so skipping to next cluster happens efficiently
2017-06-24 00:21:00 +0100 Tim-Philipp Müller <tim@centricular.com>
* ext/meson.build:
* ext/raw1394/meson.build:
meson: build raw1394 plugin
https://bugzilla.gnome.org/show_bug.cgi?id=784134
2017-06-23 23:50:00 +0100 Tim-Philipp Müller <tim@centricular.com>
* ext/aalib/meson.build:
* ext/meson.build:
meson: build aalib plugin
https://bugzilla.gnome.org/show_bug.cgi?id=784134
2017-06-23 23:38:27 +0100 Tim-Philipp Müller <tim@centricular.com>
* ext/libcaca/meson.build:
* ext/meson.build:
meson: build caca plugin
https://bugzilla.gnome.org/show_bug.cgi?id=784134
2017-06-23 20:01:59 +0100 Tim-Philipp Müller <tim@centricular.com>
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/inspect/plugin-1394.xml:
* docs/plugins/inspect/plugin-aasink.xml:
* docs/plugins/inspect/plugin-alaw.xml:
* docs/plugins/inspect/plugin-alpha.xml:
* docs/plugins/inspect/plugin-alphacolor.xml:
* docs/plugins/inspect/plugin-apetag.xml:
* docs/plugins/inspect/plugin-audiofx.xml:
* docs/plugins/inspect/plugin-audioparsers.xml:
* docs/plugins/inspect/plugin-auparse.xml:
* docs/plugins/inspect/plugin-autodetect.xml:
* docs/plugins/inspect/plugin-avi.xml:
* docs/plugins/inspect/plugin-cacasink.xml:
* docs/plugins/inspect/plugin-cairo.xml:
* docs/plugins/inspect/plugin-cutter.xml:
* docs/plugins/inspect/plugin-debug.xml:
* docs/plugins/inspect/plugin-deinterlace.xml:
* docs/plugins/inspect/plugin-dtmf.xml:
* docs/plugins/inspect/plugin-dv.xml:
* docs/plugins/inspect/plugin-effectv.xml:
* docs/plugins/inspect/plugin-equalizer.xml:
* docs/plugins/inspect/plugin-flac.xml:
* docs/plugins/inspect/plugin-flv.xml:
* docs/plugins/inspect/plugin-flxdec.xml:
* docs/plugins/inspect/plugin-gdkpixbuf.xml:
* docs/plugins/inspect/plugin-goom.xml:
* docs/plugins/inspect/plugin-goom2k1.xml:
* docs/plugins/inspect/plugin-icydemux.xml:
* docs/plugins/inspect/plugin-id3demux.xml:
* docs/plugins/inspect/plugin-imagefreeze.xml:
* docs/plugins/inspect/plugin-interleave.xml:
* docs/plugins/inspect/plugin-isomp4.xml:
* docs/plugins/inspect/plugin-jack.xml:
* docs/plugins/inspect/plugin-jpeg.xml:
* docs/plugins/inspect/plugin-level.xml:
* docs/plugins/inspect/plugin-matroska.xml:
* docs/plugins/inspect/plugin-mulaw.xml:
* docs/plugins/inspect/plugin-multifile.xml:
* docs/plugins/inspect/plugin-multipart.xml:
* docs/plugins/inspect/plugin-navigationtest.xml:
* docs/plugins/inspect/plugin-oss4.xml:
* docs/plugins/inspect/plugin-ossaudio.xml:
* docs/plugins/inspect/plugin-png.xml:
* docs/plugins/inspect/plugin-pulseaudio.xml:
* docs/plugins/inspect/plugin-replaygain.xml:
* docs/plugins/inspect/plugin-rtp.xml:
* docs/plugins/inspect/plugin-rtpmanager.xml:
* docs/plugins/inspect/plugin-rtsp.xml:
* docs/plugins/inspect/plugin-shapewipe.xml:
* docs/plugins/inspect/plugin-shout2.xml:
* docs/plugins/inspect/plugin-smpte.xml:
* docs/plugins/inspect/plugin-soup.xml:
* docs/plugins/inspect/plugin-spectrum.xml:
* docs/plugins/inspect/plugin-speex.xml:
* docs/plugins/inspect/plugin-taglib.xml:
* docs/plugins/inspect/plugin-udp.xml:
* docs/plugins/inspect/plugin-video4linux2.xml:
* docs/plugins/inspect/plugin-videobox.xml:
* docs/plugins/inspect/plugin-videocrop.xml:
* docs/plugins/inspect/plugin-videofilter.xml:
* docs/plugins/inspect/plugin-videomixer.xml:
* docs/plugins/inspect/plugin-vpx.xml:
* docs/plugins/inspect/plugin-wavenc.xml:
* docs/plugins/inspect/plugin-wavpack.xml:
* docs/plugins/inspect/plugin-wavparse.xml:
* docs/plugins/inspect/plugin-ximagesrc.xml:
* docs/plugins/inspect/plugin-y4menc.xml:
docs: update for git master
2017-06-23 19:52:04 +0100 Tim-Philipp Müller <tim@centricular.com>
* README:
* configure.ac:
* meson.build:
* po/POTFILES.in:
* sys/Makefile.am:
* sys/meson.build:
* sys/sunaudio/Makefile.am:
* sys/sunaudio/gstsunaudio.c:
* sys/sunaudio/gstsunaudiomixer.c:
* sys/sunaudio/gstsunaudiomixer.h:
* sys/sunaudio/gstsunaudiomixerctrl.c:
* sys/sunaudio/gstsunaudiomixerctrl.h:
* sys/sunaudio/gstsunaudiomixeroptions.c:
* sys/sunaudio/gstsunaudiomixeroptions.h:
* sys/sunaudio/gstsunaudiomixertrack.c:
* sys/sunaudio/gstsunaudiomixertrack.h:
* sys/sunaudio/gstsunaudiosink.c:
* sys/sunaudio/gstsunaudiosink.h:
* sys/sunaudio/gstsunaudiosrc.c:
* sys/sunaudio/gstsunaudiosrc.h:
* tests/check/Makefile.am:
* tests/check/elements/.gitignore:
* tests/check/elements/sunaudio.c:
* tests/check/meson.build:
sys: remove sunaudio plugin
Even though hooked up to the build system, it's clear that no one
has ever built or used this with GStreamer 1.x. It wants to link
against libgstinterfaces, which no longer exists. And uses 0.10-style
raw audio caps. And the last meaningful change was done in 2009.
Let's just remove it.
2017-06-23 19:35:28 +0100 Tim-Philipp Müller <tim@centricular.com>
* sys/meson.build:
* sys/oss4/meson.build:
meson: build oss4 plugin
https://bugzilla.gnome.org/show_bug.cgi?id=784134
2017-06-23 19:23:52 +0100 Tim-Philipp Müller <tim@centricular.com>
* sys/meson.build:
* sys/oss/meson.build:
meson: build oss plugin
https://bugzilla.gnome.org/show_bug.cgi?id=784134
2017-06-22 11:38:56 +0300 Sebastian Dröge <sebastian@centricular.com>
* gst/rtsp/gstrtspsrc.c:
rtspsrc: Actually use the receive lock when receiving, not the send lock
2017-06-22 01:01:40 +1000 Jan Schmidt <jan@centricular.com>
* tests/examples/qt/qmlsink/CMakeLists.txt:
qmlsink example: Add CMakeLists.txt
Make it possible to build using cmake instead of qmake
2017-06-22 01:01:40 +1000 Jan Schmidt <jan@centricular.com>
* ext/qt/qtitem.cc:
qt: Remove misleading reference to GTK in qtitem.cc
2017-06-15 11:46:54 -0400 Thibault Saunier <thibault.saunier@osg.samsung.com>
* ext/flac/gstflactag.c:
flactag: Fix warning with the newly added GstStateChange values
https://bugzilla.gnome.org/show_bug.cgi?id=783798
2017-06-15 19:09:26 +0200 Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>
* gst/rtsp/gstrtspsrc.c:
rtspsrc: do not checksum the stream id
https://bugzilla.gnome.org/show_bug.cgi?id=783307
2017-06-15 23:31:24 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/isomp4/fourcc.h:
* gst/isomp4/gstqtmux.c:
* gst/isomp4/gstqtmuxmap.c:
* gst/isomp4/qtdemux.c:
qtmux: add support for muxing PNG
Demuxer already supported it.
2017-06-15 10:40:51 +0300 Sebastian Dröge <sebastian@centricular.com>
* gst/rtsp/gstrtspsrc.c:
* gst/rtsp/gstrtspsrc.h:
rtspsrc: Use a mutex for protecting against concurrent send/receives
We currently send data to the RTSP connection from multiple threads:
whenever a command is to be handled and whenever RTCP is generated. This
can cause data corruption or worse if both happen at the same time.
As such, protect gst_rtsp_connection_send() and gst_rtsp_connection_receive()
calls with a mutex. While this means that we hold a mutex during the IO
operation, this is not actually a problem as the IO operation can be
interrupted (gst_rtsp_connection_flush()) at any time and is blocking by
itself anyway.
2017-06-15 11:50:44 +0300 Sebastian Dröge <sebastian@centricular.com>
* gst/isomp4/atoms.c:
qtmux: Un-merge the last two stsc entries after serializing
The last entry will most likely get new samples added to it in "robust"
muxing mode, changing the samples_per_chunk and thus making it wrong to
keep the last two entries merged. It will run into an assertion later
when adding a new sample to the chunk.
Thanks to gdiener@cardinalpeak.com for the analysis of the bug and
proposal for a solution.
2017-06-14 00:09:25 +0300 Sebastian Dröge <sebastian@centricular.com>
* gst/wavparse/gstwavparse.c:
wavparse: Actually clip to upstream size instead of size of the data chunk
There might be other chunks after the data chunk, so clipping the chunk
size with the data size can lead to a negative number and all following
calculations go wrong and cause crashes or worse.
This was introduced in 3ac119bbe2c360e28c087cf3852ea769d611b120.
https://bugzilla.gnome.org/show_bug.cgi?id=783760
2017-06-13 17:40:19 +0300 Vivia Nikolaidou <vivia@ahiru.eu>
* gst/multifile/gstsplitmuxsink.c:
splitmux: Drop allocation queries
They can cause us to deadlock, while we're waiting for a new frame and
upstream is waiting for the allocation query to be answered before
sending a frame
https://bugzilla.gnome.org/show_bug.cgi?id=783753
2017-06-01 02:03:27 +0200 Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>
* gst/rtsp/gstrtspsrc.c:
* gst/rtsp/gstrtspsrc.h:
rtspsrc: uniquify stream ids
https://bugzilla.gnome.org/show_bug.cgi?id=783307
2017-06-07 12:47:59 -0400 Thibault Saunier <thibault.saunier@osg.samsung.com>
* tests/check/meson.build:
meson: Do not use path separator in test names
Avoiding warnings like:
WARNING: Target "elements/audioamplify" has a path separator in its name.
2017-06-06 11:29:29 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* tests/examples/v4l2/camctrl.c:
Fix v4l2 example
2017-06-05 16:55:13 +0900 Jimmy Ohn <yongjin.ohn@lge.com>
* gst/isomp4/qtdemux.c:
qtdemux: remove not needed code
remove not needed code about res variable.
https://bugzilla.gnome.org/show_bug.cgi?id=783422
2017-06-02 14:01:17 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2videoenc.c:
v4l2videoenc: Make sure min_buffers is valid
When upstream does no use the v4l2videoenc pool, we need to activate
that internal pool. Though, we relied the driver to provide a minimum
required buffer, which Qualcomm Venus driver don't currently provide.
https://bugzilla.gnome.org/show_bug.cgi?id=783361
2017-06-02 11:30:15 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/gstrtph265depay.c:
rtph265depay: fix caps leak
2017-05-26 16:30:06 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/gstrtph264depay.c:
rtph264depay: simplify buffer accumulation control flow
There is no difference between pushing out a buffer directly
with gst_rtp_base_depayload_push() and returning it from the
process function. The base class will just call _depayload_push()
on the returned buffer as well.
So instead of marshalling buffers through three layers and back,
just push them from one place in handle_nal() and always return
NULL from the process vfunc. This simplifies the code a little.
Also rename _push_fragmentation_unit() to _finish_fragmentation_unit()
for clarity. Push sounds like it means being pushed out, whereas
it might just be pushed into an adapter.
This change has the side-effect that multiple NALs in a single STAP
(such as SPS/PPS) may no longer be pushed out as a single buffer if
we output NALs in byte-stream format (i.e. not aggregate AUs), but
that shouldn't really make any difference to anyone.
2017-05-30 22:23:10 +0200 Juan Navarro <juan.navarro@gmx.es>
* gst/rtpmanager/rtpsession.c:
rtpsession: print value of unknown RTCP Payload Type
This adds printing the actual value of any unknown RTCP PT
to the already existing WARNING log message.
https://bugzilla.gnome.org/show_bug.cgi?id=783248
2017-05-26 17:52:19 +0200 Edward Hervey <edward@centricular.com>
* sys/v4l2/gstv4l2videoenc.c:
v4l2videoenc: Don't leak VideoCodecState
CID #1409852
2017-05-26 17:48:01 +0200 Edward Hervey <edward@centricular.com>
* ext/dv/gstdvdemux.c:
dvdemux: Remove un-needed variable check
if pad wasn't present by now everything would have broken before
CID #1409854
2017-05-25 15:26:37 +0200 Piotr Drąg <piotrdrag@gmail.com>
* po/POTFILES.in:
po: update POTFILES
https://bugzilla.gnome.org/show_bug.cgi?id=783093
2017-05-25 10:09:04 +0800 Haihua Hu <jared.hu@nxp.com>
* ext/qt/qtwindow.cc:
glframebuffer: check frame buffer status need use specific fbo target
https://bugzilla.gnome.org/show_bug.cgi?id=783065
2017-05-24 14:19:27 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2videoenc.c:
v4l2videoenc: Remove unused function
2017-05-21 15:29:11 +0200 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/ext/types-compat.h:
v4l2: Don't redefine __bitwise if already set
https://bugzilla.gnome.org/show_bug.cgi?id=728438
2017-05-23 14:40:56 -0400 Ayaka <ayaka@soulik.info>
* sys/v4l2/Makefile.am:
* sys/v4l2/gstv4l2.c:
* sys/v4l2/gstv4l2h264enc.c:
* sys/v4l2/gstv4l2h264enc.h:
* sys/v4l2/gstv4l2videoenc.c:
* sys/v4l2/gstv4l2videoenc.h:
* sys/v4l2/meson.build:
v4l2: Add Video Encoder support
This implements H264 encoding support using generic V4L2 interface. It is
reported to work with Samsung MFC driver, IXM.6 CODA driver and
Qualcomm mainline Venus driver. Other platform should be supported as
none of this work is platform specific.
The implementation consist of a GstV4l2VideoEnc base class, which
implements the core streaming functionality. This base class is implemented
by GstV4l2H264Enc class that implements the caps negotiation specific to
H264 profiles and level. This implementation supports hardware with multiple
H264 encoder. Though, to make it simplier to use, the first discovered H264
encoder will be named v4l2h264enc. Other encoder found during discovery will
have a unique name like v4l2video0h264enc.
This work is the combined work of multiple developpers in the last 3
years. Thanks to all of the contributors:
Ayaka <ayaka@soulik.info>
Frédéric Sureau <frederic.sureau@vodalys.com>
Jean-Michel Hautbois <jean-michel.hautbois@veo-labs.com>
Nicolas Dufresne <nicolas.dufresne@collabora.com>
Pablo Anton <pablo.anton@vodalys-labs.com>
https://bugzilla.gnome.org/show_bug.cgi?id=728438
2017-05-23 14:36:37 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* sys/v4l2/gstv4l2videodec.c:
v4l2videodec: Remove unused forward declaration
https://bugzilla.gnome.org/show_bug.cgi?id=728438
2015-10-05 16:30:46 +0100 Ayaka <ayaka@soulik.info>
* sys/v4l2/gstv4l2bufferpool.c:
v4l2pool: Fix wrong error message
https://bugzilla.gnome.org/show_bug.cgi?id=728438
2015-10-05 16:20:19 +0100 Ayaka <ayaka@soulik.info>
* sys/v4l2/gstv4l2object.c:
v4l2: increase pre-allocated encoded buffer size
As of today, the MFC encoder often need to exceed that 1 MB
size for encoded buffer we fixed earlier for decoding.
https://bugzilla.gnome.org/show_bug.cgi?id=728438
2017-05-24 16:32:30 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/gstrtpopusdepay.c:
rtpopusdepay: minor perf improvements
Use the ::process_rtp_packet() vfunc to avoid mapping the
RTP buffer twice.
gst_rtp_buffer_get_payload_buffer() returns a new sub-buffer
which will always be writable, so no need to make it writable.
2017-05-24 16:14:54 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/gstrtpopusdepay.c:
* gst/rtp/gstrtpopuspay.c:
rtp: opus: use existing utility funcs for copying/dropping metas
We had our own copies of those while the code was in -bad, but now
we can use the existing utility functions instead of re-implementing
them.
2017-05-24 12:57:10 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/rtp/gstrtp.c:
* gst/rtp/gstrtpL16depay.c:
* gst/rtp/gstrtpL24depay.c:
* gst/rtp/gstrtpac3depay.c:
* gst/rtp/gstrtpac3pay.c:
* gst/rtp/gstrtpamrdepay.c:
* gst/rtp/gstrtpamrpay.c:
* gst/rtp/gstrtpbvdepay.c:
* gst/rtp/gstrtpceltdepay.c:
* gst/rtp/gstrtpceltpay.c:
* gst/rtp/gstrtpg722depay.c:
* gst/rtp/gstrtpg723pay.c:
* gst/rtp/gstrtpg726depay.c:
* gst/rtp/gstrtpg729depay.c:
* gst/rtp/gstrtpg729pay.c:
* gst/rtp/gstrtpgsmdepay.c:
* gst/rtp/gstrtpgsmpay.c:
* gst/rtp/gstrtph261depay.c:
* gst/rtp/gstrtph261pay.c:
* gst/rtp/gstrtph263depay.c:
* gst/rtp/gstrtph263pay.c:
* gst/rtp/gstrtph263pdepay.c:
* gst/rtp/gstrtph263ppay.c:
* gst/rtp/gstrtph264depay.c:
* gst/rtp/gstrtph264pay.c:
* gst/rtp/gstrtph265depay.c:
* gst/rtp/gstrtph265pay.c:
* gst/rtp/gstrtpilbcdepay.c:
* gst/rtp/gstrtpj2kdepay.c:
* gst/rtp/gstrtpj2kpay.c:
* gst/rtp/gstrtpjpegdepay.c:
* gst/rtp/gstrtpjpegpay.c:
* gst/rtp/gstrtpmp4adepay.c:
* gst/rtp/gstrtpmp4apay.c:
* gst/rtp/gstrtpmp4vdepay.c:
* gst/rtp/gstrtpmp4vpay.c:
* gst/rtp/gstrtpmpadepay.c:
* gst/rtp/gstrtpmpapay.c:
* gst/rtp/gstrtpmpvdepay.c:
* gst/rtp/gstrtpmpvpay.c:
* gst/rtp/gstrtppcmadepay.c:
* gst/rtp/gstrtppcmudepay.c:
* gst/rtp/gstrtpqcelpdepay.c:
* gst/rtp/gstrtpsbcdepay.c:
* gst/rtp/gstrtpsbcpay.c:
* gst/rtp/gstrtpsirendepay.c:
* gst/rtp/gstrtpspeexdepay.c:
* gst/rtp/gstrtpspeexpay.c:
* gst/rtp/gstrtpsv3vdepay.c:
* gst/rtp/gstrtptheorapay.c:
* gst/rtp/gstrtputils.c:
* gst/rtp/gstrtputils.h:
* gst/rtp/gstrtpvorbispay.c:
* gst/rtp/gstrtpvp8depay.c:
* gst/rtp/gstrtpvp8pay.c:
* gst/rtp/gstrtpvp9depay.c:
* gst/rtp/gstrtpvp9pay.c:
* gst/rtp/gstrtpvrawdepay.c:
* gst/rtp/gstrtpvrawpay.c:
rtp: cache meta tag quarks and add more utility functions for metas
Every g_quark_from_static_string() is a hash table lookup serialised
on the global quark lock in GLib. Let's just look up the two quarks
we need once and cache them locally for future use. While we're at it,
add new utility functions for the two most commonly used tags
(audio + video). Make first argument a gpointer so we don't have to
cast and make the code ugly. These are used for logging purposes
only anyway.
2017-05-24 11:33:05 +0530 vijay <vijay.palaniswamy@in.bosch.com>
* gst/audioparsers/gstaacparse.c:
aacparse : Fix, Caps were not set while reusing aacparse
While reusing aacparse caps were not set.This fix enables aacparse to reuse in same pipeline.
https://bugzilla.gnome.org/show_bug.cgi?id=783027
2017-05-21 17:45:34 +0100 Tim-Philipp Müller <tim@centricular.com>
* Makefile.am:
* config.h.meson:
* meson.build:
meson: don't need config.h.meson any longer
2017-05-21 15:26:12 +0200 Carlos Rafael Giani <dv@pseudoterminal.org>
* ext/qt/gstqsgtexture.cc:
* ext/qt/gstqsgtexture.h:
qmlglsink: Add dummy texture that is shown as placeholder for NULL buffers
https://bugzilla.gnome.org/show_bug.cgi?id=782917
2017-04-24 16:55:22 +0300 George Kiagiadakis <george.kiagiadakis@collabora.com>
* ext/shout2/gstshout2.c:
* ext/shout2/gstshout2.h:
shout2send: use non-blocking I/O and a configurable network operations timeout
This allows timing out on network errors much earlier
(currently it takes ~15min to timeout) and we can still
unlock and change state in the meantime.
https://bugzilla.gnome.org/show_bug.cgi?id=571722
2017-05-21 10:37:19 +0100 Tim-Philipp Müller <tim@centricular.com>
* ext/taglib/meson.build:
* meson.build:
meson: make C++ compiler optional
It's only needed for the taglib plugin which is optional.
2017-05-21 10:33:43 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/multifile/multifile.vproj:
multifile: remove some cruft
2017-05-20 17:09:52 +0200 Josep Torra <jtorra@oblong.com>
* sys/osxaudio/gstosxcoreaudio.c:
osxaudio: fixes playback of mono streams with no channel-mask field in caps
Fixes a negotiation error seen when trying to playback of a .MOV file with
a mono AAC audio stream decoded by avcdec_aac that doesn't set channel-mask
field but sink was requiring channel-mask=0x3.
2015-09-06 20:49:59 +0530 Ravi Kiran K N <ravi.kiran@samsung.com>
* ext/dv/gstdvdemux.c:
* ext/dv/gstdvdemux.h:
dvdemux: Push tag event to both pads
Tags are pushed to "videosrcpad"/"audiosrcpad" in
gst_dvdemux_add_pad() method, however they will be NULL
in this method, hence tags are not pushed.
Instead, send tag event to "pad" created gst_dvdemux_add_pad().
Signal no-more-pads when both pads are created
https://bugzilla.gnome.org/show_bug.cgi?id=743657
2017-05-20 14:53:42 +0100 Tim-Philipp Müller <tim@centricular.com>
* meson.build:
* meson_options.txt:
* tests/check/elements/autodetect.c:
meson: add options to set package name and origin
https://bugzilla.gnome.org/show_bug.cgi?id=782172
2017-05-20 11:40:33 +0100 Luis de Bethencourt <luisbg@osg.samsung.com>
* gst/multifile/gstmultifilesink.c:
multifilesink: fix property name in example pipeline
Since the move from CVS the property name of the documentation example
has been filename instead of location. Users trying the gst-launch
command as is will get:
no property name "filename" in element
Fixing it.
2017-05-20 11:13:40 +0200 Josep Torra <jtorra@oblong.com>
* sys/osxvideo/cocoawindow.m:
* sys/osxvideo/osxvideosink.m:
osxvideo: fix macOS 10.12 deprecation warnings
Add #defines to allow older versions of macOS to use the new constant names.
2017-05-13 09:05:57 +0200 Edward Hervey <edward@centricular.com>
* gst/isomp4/fourcc.h:
* gst/isomp4/qtdemux.c:
* gst/isomp4/qtdemux_types.c:
isomp4: Safely ignore [skip] atoms
Instead of warning about them
2017-05-18 15:23:14 +0300 Simon Himmelbauer <shimmelbauer@toolsonair.com>
* ext/qt/gstqtglutility.cc:
qt: Use GST_GL_HAVE_PLATFORM_CGL instead of GST_GL_HAVE_PLATFORM_COCOA
The latter is not used/available anymore since years. Also fix a typo
in the include path for the Cocoa GL display header.
2017-05-18 15:10:30 +0300 Sebastian Dröge <sebastian@centricular.com>
* ext/soup/gstsouphttpsrc.c:
* ext/soup/gstsouphttpsrc.h:
souphttpsrc: Make session sharing thread-safe on our side
https://bugzilla.gnome.org/show_bug.cgi?id=780140
2017-05-18 10:43:19 +0100 Tim-Philipp Müller <tim@centricular.com>
* ext/shout2/gstshout2.c:
* gst/audiofx/gstscaletempoplugin.c:
Fix up package name and origin in some plugins
2017-05-15 19:51:47 +0300 Sebastian Dröge <sebastian@centricular.com>
* sys/v4l2/gstv4l2allocator.c:
* sys/v4l2/gstv4l2bufferpool.c:
gst: Clear floating flag in constructor of all GstObject subclasses that are not owned by any parent
https://bugzilla.gnome.org/show_bug.cgi?id=743062
2017-05-15 14:22:34 +0300 Sebastian Dröge <sebastian@centricular.com>
* ext/raw1394/gst1394clock.c:
1394: Sink the clock reference in the constructor
This is now needed as GstClock does not do that internally anymore,
because that broke bindings.
https://bugzilla.gnome.org/show_bug.cgi?id=743062
2017-05-17 10:58:05 +0800 Haihua Hu <jared.hu@nxp.com>
* ext/qt/gstqtglutility.cc:
qml: Add EGL platform support for x11 backend
Add support for EGL platform when x11 is available. This can work
e.g. on imx6 platform.
https://bugzilla.gnome.org/show_bug.cgi?id=782718
2017-04-28 23:05:35 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* ext/pulse/pulseutil.h:
pulse: Accept MPEG 1 layer 3 version 2.5
https://bugzilla.gnome.org/show_bug.cgi?id=781929
2017-05-16 13:50:16 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* configure.ac:
* ext/aalib/Makefile.am:
* ext/cairo/Makefile.am:
* ext/dv/Makefile.am:
* ext/flac/Makefile.am:
* ext/gdk_pixbuf/Makefile.am:
* ext/jack/Makefile.am:
* ext/jpeg/Makefile.am:
* ext/libcaca/Makefile.am:
* ext/libpng/Makefile.am:
* ext/pulse/Makefile.am:
* ext/raw1394/Makefile.am:
* ext/shout2/Makefile.am:
* ext/soup/Makefile.am:
* ext/speex/Makefile.am:
* ext/taglib/Makefile.am:
* ext/vpx/Makefile.am:
* ext/wavpack/Makefile.am:
* gst/alpha/Makefile.am:
* gst/apetag/Makefile.am:
* gst/audiofx/Makefile.am:
* gst/audioparsers/Makefile.am:
* gst/auparse/Makefile.am:
* gst/autodetect/Makefile.am:
* gst/avi/Makefile.am:
* gst/cutter/Makefile.am:
* gst/debugutils/Makefile.am:
* gst/deinterlace/Makefile.am:
* gst/dtmf/Makefile.am:
* gst/effectv/Makefile.am:
* gst/equalizer/Makefile.am:
* gst/flv/Makefile.am:
* gst/flx/Makefile.am:
* gst/goom/Makefile.am:
* gst/goom2k1/Makefile.am:
* gst/icydemux/Makefile.am:
* gst/id3demux/Makefile.am:
* gst/imagefreeze/Makefile.am:
* gst/interleave/Makefile.am:
* gst/isomp4/Makefile.am:
* gst/law/Makefile.am:
* gst/level/Makefile.am:
* gst/matroska/Makefile.am:
* gst/monoscope/Makefile.am:
* gst/multifile/Makefile.am:
* gst/multipart/Makefile.am:
* gst/replaygain/Makefile.am:
* gst/rtp/Makefile.am:
* gst/rtpmanager/Makefile.am:
* gst/rtsp/Makefile.am:
* gst/shapewipe/Makefile.am:
* gst/smpte/Makefile.am:
* gst/spectrum/Makefile.am:
* gst/udp/Makefile.am:
* gst/videobox/Makefile.am:
* gst/videocrop/Makefile.am:
* gst/videofilter/Makefile.am:
* gst/videomixer/Makefile.am:
* gst/wavenc/Makefile.am:
* gst/wavparse/Makefile.am:
* gst/y4m/Makefile.am:
* sys/directsound/Makefile.am:
* sys/oss/Makefile.am:
* sys/oss4/Makefile.am:
* sys/osxaudio/Makefile.am:
* sys/osxvideo/Makefile.am:
* sys/sunaudio/Makefile.am:
* sys/v4l2/Makefile.am:
* sys/waveform/Makefile.am:
* sys/ximage/Makefile.am:
Remove plugin specific static build option
Static and dynamic plugins now have the same interface. The standard
--enable-static/--enable-shared toggle are sufficient.
2017-05-16 14:07:56 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* ext/twolame/Makefile.am:
Remove plugin specific static build option
Static and dynamic plugins now have the same interface. The standard
--enable-static/--enable-shared toggle are sufficient.
2017-05-16 14:07:56 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* ext/lame/Makefile.am:
Remove plugin specific static build option
Static and dynamic plugins now have the same interface. The standard
--enable-static/--enable-shared toggle are sufficient.
2017-05-16 14:07:56 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* ext/mpg123/Makefile.am:
Remove plugin specific static build option
Static and dynamic plugins now have the same interface. The standard
--enable-static/--enable-shared toggle are sufficient.
2017-05-16 14:05:52 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* ext/gtk/Makefile.am:
Remove plugin specific static build option
Static and dynamic plugins now have the same interface. The standard
--enable-static/--enable-shared toggle are sufficient.
2017-05-16 14:05:52 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* ext/qt/Makefile.am:
Remove plugin specific static build option
Static and dynamic plugins now have the same interface. The standard
--enable-static/--enable-shared toggle are sufficient.
2017-05-12 17:53:57 +0300 Vivia Nikolaidou <vivia@ahiru.eu>
* gst/multifile/gstsplitmuxsink.c:
* gst/multifile/gstsplitmuxsink.h:
splitmuxsink: Add alignment-threshold argument
If a non-reference stream is behind the reference stream by an amount of
time smaller than the alignment threshold (in nsec), it counts as being
after it.
https://bugzilla.gnome.org/show_bug.cgi?id=782563
2017-05-16 12:56:15 +0300 Vivia Nikolaidou <vivia@ahiru.eu>
* gst/isomp4/gstqtmux.c:
qtmux: Do not check timecode data for mp4 container
Timecode trak is only supported for mov right now, not for mp4. That
code would otherwise create an invalid trak if the muxed video contained
timecode metadata.
https://bugzilla.gnome.org/show_bug.cgi?id=782684
2017-05-11 20:01:15 +0200 Sebastian Dröge <sebastian@centricular.com>
* gst/isomp4/gstqtmux.c:
qtmux: When accepting renegotiation, just return TRUE and change nothing
We only accept new caps if they are basically the same. We don't want to
reset anything as if the caps are new, otherwise various state could get
out of sync with the current run.
2017-05-11 19:21:22 +0200 Sebastian Dröge <sebastian@centricular.com>
* gst/isomp4/gstqtmux.c:
qtmux: In prefill mode, only pad buffers with > 0 sized memories as needed
Adding a 0-byte memory has not much effect.
Also add some debug output.
2017-05-10 15:58:41 +0200 Sebastian Dröge <sebastian@centricular.com>
* gst/isomp4/gstqtmux.c:
qtmux: Lateness is in QT timescale, diff in GstClockTime
Print the right one in debug output to get meaningful numbers.
2017-05-10 14:31:40 +0200 Sebastian Dröge <sebastian@centricular.com>
* gst/isomp4/gstqtmux.c:
qtmux: Error out if a gap edit list has to be written in prefill mode
We don't have any space reserved for this in the moov and the
pre-finalized moov would have broken A/V synchronization. Error out here
now
2017-05-10 11:42:09 +0200 Sebastian Dröge <sebastian@centricular.com>
* gst/isomp4/gstqtmux.c:
qtmux: Calculate with reserved moov size instead of last moov size
We have some padding added after the initial moov, so a bigger updated
moov can be handled to some degree and is expected. Previously we just
ignored the padding and errored out in cases when the padding would've
just been enough.
2017-05-10 11:12:23 +0200 Sebastian Dröge <sebastian@centricular.com>
* gst/isomp4/gstqtmux.c:
qtmux: Error out directly if sending filler data results in a flow error
CID 1405994
2017-05-09 16:02:43 +0200 Sebastian Dröge <sebastian@centricular.com>
* gst/isomp4/gstqtmux.c:
qtmux: In prefill mode, handle the case when only the first chunk was ever used
2017-05-09 09:47:10 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* ext/qt/gstplugin.cc:
qmlgl: Make the plugin name match the pugin file name
2017-03-16 15:12:07 +0200 Sebastian Dröge <sebastian@centricular.com>
* ext/soup/gstsouphttpsrc.c:
souphttpsrc: Use a in-memory cookie jar by default in sessions we created
This ensures that cookies are stored and used as set by the server, and
shared with other souphttpsrc that use the same SoupSession.
https://bugzilla.gnome.org/show_bug.cgi?id=780140
2017-03-16 13:58:41 +0200 Sebastian Dröge <sebastian@centricular.com>
* ext/soup/gstsouphttpsrc.c:
* ext/soup/gstsouphttpsrc.h:
souphttpsrc: Implement soup session sharing
souphttpsrc now shares its SoupSession with other elements in the
pipeline via GstContext if possible (session-wide settings are all the
defaults), or if the context was forced by the application.
This allows multiple souphttpsrcs to reuse connections, cookies, etc.
https://bugzilla.gnome.org/show_bug.cgi?id=780140
2017-03-09 10:15:34 +0200 Sebastian Dröge <sebastian@centricular.com>
* gst/isomp4/atoms.c:
* gst/isomp4/atoms.h:
* gst/isomp4/gstqtmux.c:
* gst/isomp4/gstqtmux.h:
qtmux: Add new prefill recording mode
This sets up a moov with the correct sample positions beforehand and
only works with constant framerate, I-frame only streams.
Currently only support for ProRes and raw audio is implemented but
adding new codecs is just a matter of defining appropriate maximum frame
sizes.
https://bugzilla.gnome.org/show_bug.cgi?id=781447
2017-03-29 14:01:25 +0300 Sebastian Dröge <sebastian@centricular.com>
* gst/isomp4/gstqtmux.c:
* gst/isomp4/gstqtmux.h:
qtmux: Error out on discontinuities/gaps when muxing raw audio
When muxing raw audio, we have no way of storing timestamps but are just
storing a continuous stream of audio samples. If the difference between
the expected and the real timestamp becomes to big, we should error out
instead of silently creating files with wrong A/V sync.
https://bugzilla.gnome.org/show_bug.cgi?id=780679
2017-05-09 11:41:25 +0200 Sebastian Dröge <sebastian@centricular.com>
* ext/vpx/gstvpxdec.c:
vpxdec: Set fb->priv to NULL after freeing just in case
https://bugzilla.gnome.org/show_bug.cgi?id=782359
2017-05-08 15:22:00 +0000 Dustin Spicuzza <dustin@virtualroadside.com>
* sys/directsound/gstdirectsoundsink.c:
* sys/directsound/gstdirectsoundsink.h:
directsoundsink: Use GstClock API instead of Sleep() for waiting
It's more accurate and allows cancellation.
https://bugzilla.gnome.org/show_bug.cgi?id=773681
2017-05-08 15:05:45 +0000 Tim-Philipp Müller <tim@centricular.com>
* ext/vpx/gstvp9dec.c:
vpx: fix build against older libvpx versions
Such as 1.3.0 as on raspbian.
2017-05-03 23:23:10 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
* sys/directsound/gstdirectsoundsink.c:
directsoundsink: Fix corner case causing large CPU usage
We were unnecessarily looping/goto-ing repeatedly when we had exactly
the amount of data as the free space, and also when the free space was
too small. This, as it turns out, is a very common scenario with
Directsound on Windows.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=773681
We have to do polling here because the event notification API that
Directsound exposes cannot be used with live playback since all events
must be registered in advance with the capture buffer, you cannot
add/remove them once playback has begun. Directsoundsrc had the same
problem.
See also: https://bugzilla.gnome.org/show_bug.cgi?id=781249
2017-05-03 23:31:00 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
* sys/directsound/gstdirectsoundsink.c:
directsoundsink: Clean up some debug logging
Don't need to print the function name, gstreamer does it for you.
https://bugzilla.gnome.org/show_bug.cgi?id=773681
2017-05-06 22:30:20 +0100 Tim-Philipp Müller <tim@centricular.com>
* gst/matroska/matroska-ids.h:
matroskademux: improve index memory usage
Re-arrange order of index entry struct members to avoid padding
bytes in the middle of the struct, thus potentially reducing the
overall size of the struct and reducing memory used by the index.
On Linux x86_64 the size goes down from 32 bytes to 24 bytes for
each index entry.
2017-05-04 18:59:14 +0300 Sebastian Dröge <sebastian@centricular.com>
* configure.ac:
* meson.build:
Back to development